• Safety and Health at Work
• /
• v.7 no.1
• /
• pp.63-71
• /
• 2016

Background: Construction painters have not been studied well in terms of their hazards exposure. The objective of this study was to evaluate the exposure levels of total volatile organic compounds (TVOCs) for painters in the construction industry. Methods: Activity-specific personal air samplings were carried out in three waterproofing activities [polyurethane (PU), asphalt, and cement mortar] and three painting activities (epoxy, oil based, and water based) by using organic-vapor-monitor passive-sampling devices. Gas chromatograph with flame ionization detector could be used for identifying and quantifying individual organic chemicals. The levels of TVOCs, by summing up 15 targeted substances, were expressed in exposure-index (EI) values. Results: As arithmetic means in the order of concentration levels, the EIs of TVOCs in waterproofing works were 10.77, 2.42, 1.78, 1.68, 0.47, 0.07, and none detected (ND) for indoor PU-primer task, outdoor PU-primer task, outdoor PU-resin task, indoor PU-resin task, asphalt-primer task, asphalt-adhesive task, and cement-mortar task, respectively. The highest EI for painting works was 5.61 for indoor epoxyprimer task, followed by indoor epoxy-resin task (2.03), outdoor oil-based-spray-paint task (1.65), outdoor water-based-paint task (0.66), and indoor oil-based-paint task (0.15). Assuming that the operations were carried out continuously for 8 hours without breaks and by using the arithmetic means of EIs for each of the 12 tasks in this study, 58.3% (7 out of 12) exceeded the exposure limit of 100% (EI > 1.0), while 8.3% (1 out of 12) was in 50e100% of exposure limit (0.5 > EI > 1.0), and 4 tasks out of 12 were located in less than 50% of the limit range (EI < 0.5). Conclusion: From this study, we recognized that construction painters are exposed to various solvents, including carcinogens and reproductive toxins, and the levels of TVOC concentration in many of the painting tasks exceeded the exposure limits. Construction workers need to be protected from chemical agents during their painting works by using personal protective devices and/or work practice measures. Additional studies should focus on the exposure assessment of other hazards for construction workers, in order to identify high-risk tasks and to improve hazardous work environments.

• Culinary science and hospitality research
• /
• v.17 no.1
• /
• pp.1-11
• /
• 2011

This study systematically analyzes job descriptions of hotel banquet service employees using DACUM. The expert group involved in the content analysis was comprised of 6 F&B managers working at deluxe level hotels. The period for this study was from May to June in 2010, and a group interview, an individual self fill-out together with a personal interview were carried out. Findings from the analysis were as follows; job duties for hotel banquet service employees extended to pre-task, on-task and post-task for each banquet function, safety management, guest encounter and self development. They included 49 specific job tasks which were divided into 5 different categories; 16 pre-task, 13 on-task, 10 post-task, 4 safety management and 6 guest encounter and self development It is suggested from the findings that advance training should be carried out for pre, on and post tasks.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.2
• /
• pp.213-222
• /
• 2014

PURPOSE: This study was conducted to determine the effect of patient-selected, task-oriented training on activities of daily living, quality of life, and depression for stroke patients. METHODS: This study included 40 stroke subjects, randomly assigned to either an experimental group or a control group. Both the experimental group and the control group included 20 stroke patients. Patients from the experimental group selected and performed task-oriented training. In the exercise program, the patient chose two categories from six categories and trained for 30 minutes a day, three times a week, for four weeks. Patients from the control group performed conventional task-oriented training. Outcomes were measured using the Korean version of a modified Barthel Index (K-MBI), the Korean Instrumental Activities of Daily Living (K-IADL), the Stroke-specific Quality of Life (SS-QOL), the Short Form 8 (SF-8), and the Beck Depression Inventory (BDI), both before and after training. RESULTS: There were significant differences between the before- and after-intervention data of the K-MBI and the K-IADL (p<.05) for both groups. Also, there were more significant improvements in the experimental group compared to the control group (p<.05) for the SS-QOL, SF-8 and BDI. CONCLUSION: The results of this study showed that patients-selected, task-oriented training had positive effects on stroke patients' activities of daily living, quality of life, and depression.

• Journal of Korean Academy of Medicine & Therapy Science
• /
• v.10 no.2
• /
• pp.59-71
• /
• 2018

Objective: The purpose of this study is to compare the effects of the CO-OP program using cognitive strategy on the satisfaction and high-level cognitive function of chronic stroke patients with cognitive impairment with the existing task-oriented approach training method. Method: The group randomly selects the experimental group and control group from 30 patients who suffer cognitive damage due to brain damage, and then randomly presents the Cognitive Orientation to daily Occupative Performance (CO-OP) Results: The results of the study showed a significant increase in patient performance and satisfaction, task performance, and high-level cognitive functions in comparison to those before training (p<).05) There was no significant difference in CNT testing in controls; Although there were no significant differences in overall CNT testing between the two groups, the COPM, AMPS tests showed a significant increase in the experimental group compared to the comparators (p <.05). Conclusion: The Cognitive Orientation to Daily Occupative Performance (CO-OP) Intervention Act, which uses meta-in strategies, was previously used. We were able to confirm that it could be a more effective intervention in task performance and high-level cognitive function than in the Meaningful Task-Specific Training Program (MTST).

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.373-379
• /
• 2023

Creative teaching methods can be beneficial in enhancing creativity and self-directed learning abilities in the classroom. However, there may be some specific learning tasks where applying creative teaching methods can be difficult. This is because students may not have completed the necessary prerequisite learning before performing the learning task, leading to low reliability of task results or meaninglessness. This study aims to propose teaching methods that enhance creativity and self-directed learning ability when performing learning tasks that may not have sufficient prior learning. To achieve this, we present a case of applying creative teaching methods to a learning task called "national threats". As a research procedure, we provide a suitable teaching method model and detailed procedures for the given learning task, and apply them in actual classes. The results showed that applying the presented teaching methods for the learning task produced meaningful academic achievements. This study can be valuable not only for enhancing creativity in education but also for interdisciplinary research in fields such as education and national security.

• Physical Therapy Korea
• /
• v.18 no.1
• /
• pp.93-103
• /
• 2011

This study was implemented to verify the feasibility of motor function recovery and the appropriate period for therapy. The research began with spinal laminectomy of 40 white rats of Sprague-Dawley breed and induced them spinal crush injury. Following results were obtained by using the modified Tarlov test (MTT), Basso, Beattle, Bresnahan locomotor rating scale (EBB scale) and modified inclined plate test (MIPT). First, the measurement using the MTT confirm that the most severe aggravation and degeneration of functions are observed two days after induced injury, and no sign of neuromotor function recovery. Second, better scores were achieved by open-ground movement group on BBB locomotor rating scale test, and weight-bearing on inclined plate group show better performance on MIPT. Third, both BBB and MIPT scale manifested the peak of motor function recovery during 16th day after the injury and turn into gradual recovery gradient during 16th to 24th. Fourth, the control group showed functional recovery, however, the level of recovery was less significant when compared with group open-ground movement group and weight-bearing on inclined plate group. Hence, it was clearly manifested that the lumbar region of the spinal cord had shown the best performance when its functions were measured after the execution of specific physical training; therefore it indicated the possibility of learning specific task even in damaged lumbar regions. Thus it is expected to come out with better and more effective functional recovery if concentrated physical therapy was applied starting 4 days after the injury till 16 days, which is the period of the most active recovery.

• East Asian mathematical journal
• /
• v.23 no.3
• /
• pp.303-312
• /
• 2007

In this paper we extract the content of homework that leads the students to independent learners, based on the study of krutetski on individual differences and consider the specific activities related with this and the extent of task performances.

• Journal of The Korean Association For Science Education
• /
• v.16 no.2
• /
• pp.134-145
• /
• 1996

The purpose of this study was to investigate effects of mental capacity and mental demand on problem solving. Two kinds of tests were used for this study. One was FIT 752 test which required general knowledge, the other was Ohm's law test which required domain specific knowledge. The items of each test had the same logical structure and content knowledge but had different sizes of mental demand. The results of the study were summarized as follows: As mental demand of the items increased, the success rates decreased. The analysis of the hierarchical relation among items was that items with large mental demand were higher than those with small demand or at least the same level. According to the results, mental of an item was a significant factor affecting solving the problem. Effect of mental capacity on problem solving was different according to the kind of required knowledge to solve. Mental capacity was a significant factor affecting solving the FIT 752 task which required general knowledge. On the contary, solving the task which required domain specific knowledge, the results were different depending on subjects' chunk size. The results of problem solving of the groups which had small chunk size were that mental capacity was appeared a significant factor. However, results of problem solving of groups which had large chunk size were that mental capacity was not.

• The Korean Journal of Food And Nutrition
• /
• v.22 no.1
• /
• pp.123-131
• /
• 2009

The purpose of this study was to define the job description for food safety specialist, and to describe the duties and tasks of the job based on the detailed analysis of specific food safety work performed by dietitians. The job analysis was 8 professional panels and a Developing A Curriculum(DACUM) facilitator. The research was done in order to fully define the task element, process, and sequence of a food specialist and was completed by DACUM analysis. The job definition of food safety specialist is one who manages food safety through analysis, safety evaluation, inspection, and hazard blocking in all processes related to the purchase, distribution, storage, manufacture, and marketing of foods and food materials. The job description on the DACUM research chart for food safety specialist contained 7 duties and 79 tasks. Its duties were defined as the specific and independent work of a food safety specialist, and were composed of 7 duties, i.e. hazard analysis of foods and related affairs, safety evaluation of purchased food materials, safety management of food/food materials distribution/storage, safety management of food manufacture, safety examination of food marketing, administration affairs on food safety, and self-development. For the future, this study suggests a curriculum, that shall be basis of program planning and food safety operation for subjects within many schools.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.371-380
• /
• 1999

This study proposes a process information model which can integrate various activities during the product development process, the system which can manage the process. Development process information will allow designers and managers to access previous tasks readily and utilize the information in making decisions at hand. While developing products in heterogeneous and distributed environments, concurrent and collaborative designs can be achieved by STEP. The process model in this study divides the task of product development into two fundamental parts, Specific Process(SP) and Normal Process(NP). SP includes the specific information and refer to those defined by prior STEP. NP is routine process excluded from being defined as SP. Due data information can be added to manage development pace and to show delayed tasks. As two or more different processes can be linked to show the entire development flow, Static STEP information can be dynamically interlaced. Remote location operations can be incorporated on the Internet using STEP, and information can be shared. The system has been built upon a process model schema so that task stage, design history, and different development style can be managed and accessed for each component. The system has been proven efficient in information management and exchange by several scenario testings.