• Korean Journal of Hydrosciences
• /
• 제5권
• /
• pp.99-114
• /
• 1994

Three purposes of this study are as follows : The first was the development of the extension method for the limited data observed in an urban drainage basin. The second was the analysis of the correlation between storm water runoff and NPS(non-point source) Pollutant discharge. The last was the calculation of the monthly and annual specific NPS loads using the established correlation. The selected model was the SWMM(Storm Water Management Model) developed by the US EPA(Environmental Protection Agency). As a result of this study, the best correlation between storm water runoff and NPS pollutants discharge was produced by the nonlinear correlation between runoff rate(mm/hr) and specific loads rate(kg/ha) for all pollutants studied : SS, COD, BOD, and TN. The best correlation through the analysis based on evently total mass was made by the linear correlation between the by the nonlinear correlation for CASE2. The NPS annual specific loads for the urban basin studed were 4,993 kg/ha/year for SS, 775 kg/ha/year for BOD, 3,094 kg/ha/year for COD, 257 kg/ha/year for TN, respectively. And the proportion of the NPS annual specific loads to the total annual specific loads were 41 % for SS, 13 % for BOD, 29 % for COD, and 21 % for TN.

• 정보과학회 논문지
• /
• 제43권5호
• /
• pp.562-568
• /
• 2016

포인트 클라우드 데이터는 어떠한 형태를 표현하기 위해 무수히 많은 점들을 갖는 데이터 집합으로 특정 벡터 시스템에서 표현될 수 있으며, 일반적으로 3차원 좌표 공간에서 다양한 특성을 갖게 된다. 본 논문은 3차원 좌표 시스템의 포인트 클라우드에서 기존 방법(Hough Transform)보다 빠른 실린더 형태의 파이프 추정을 목표로 한다. 이를 위해 비교적 빠른 RANdom SAmple Consensus(RANSAC)를 사용한다. 본 논문에서 제안하는 실린더 형태의 파이프 추정은 두 가지 형태의 수학적 모델을 근거로 파라미터를 계산하고, 결과를 조합하여 예측한다. 두 가지 수학적 모델은 구(Sphere)와 직선(Line)이며, RANSAC 적합을 통해 실린더의 축과 반지름이 될 수 있는 구의 파라미터(중심과 반지름)를 계산하고, 이를 직선화하여 실린더를 추정한다. 이는 법선 추정(Normal Estimation) 및 분할(Segmentation) 없이 비교적 정확도를 유지하며, 빠르게 실린더 매칭을 할 수 있게 한다. 빠른 실린더 매칭은 실시간 파이프 추정이 필요한 레이저 스캐닝 및 건설 역설계 분야에서 활용할 수 있을 것이다.

• 한국정밀공학회지
• /
• 제31권10호
• /
• pp.889-895
• /
• 2014

Machine parts and structures of a change in the displacement and strain can be evaluated safety is one of the important factors. Typically the strain gauge has been employed to measure the displacement and strain. However, this contact-type measurement method has disadvantages that are not measured under condition of specific object shape, surface roughness and temperature. In particularly, 3 point bending and 4 point bending test not use strain gauge. So its test used cross head displacement and deflect meter. Digital Image Correlation measurement methods have many advantages. It is non contact-type measurement method to measure the object displacements and strain. In addition, it is possible to measure the Map of full field displacements and strain. In this paper, measured the 3 point bending deflection using the Digital Image Correlation methods. In order to secure the reliability, Digital Image Correlation method and universal test machine were compared.

• 한국소음진동공학회논문집
• /
• 제20권5호
• /
• pp.502-509
• /
• 2010

A test facility which can simultaneously measure turbocharger operating condition variables and vibro-acoustic emission in the situations that are quite similar to real internal combustion engine operating conditions has been introduced. Using this facility, a new method sweeping from full open throttle to deep surge region along constant speed curves can be utilized instead of the stationary method that has been traditionally used to obtain turbocharger compressor maps. Data covering an extensive range of the compressor performance map have been collected and analyzed. An experimental study is performed to define a noise diagram that correlates vibro-acoustic measurements to aerothermodynamic operating conditions. An instrumentation set in the facility allows the automatic definition of the operating point on the turbine and compressor map of the turbocharger. Also, radiated sound pressure and casing vibration data corresponding to the point are obtained by a microphone in the vicinity of the compressor casing and an accelerometer on the casing. The major source(s) of noise at specific operating point on the map can be easily identified with these maps. Also, acoustic characteristics of a given turbocharger at the vicinity of the surge as well as in the surge are also defined. Finally, the possibility to define mild surge region of a turbocharger using vibro-acoustic measurements is studied.

• 디지털콘텐츠학회 논문지
• /
• 제17권5호
• /
• pp.367-373
• /
• 2016

본 논문에서는 사용자 시선 추적에 사용되는 시선 추적기의 정확도 향상 및 이를 분석하는 방법을 제안한다. 제안하는 방법에서는 시선 좌표와 색 정보를 추출하여 정확한 동공 정보를 기반으로 만들어진 사용자 profile 정보를 추출한 후 이를 기반으로 시선 추적기가 부착된 디스플레이에서 고르게 높은 정확도를 유지 하도록 한다. 이 때 사용자 profile 정보 추출 시 응시 시간에 따른 정확도의 변화 또한 추정하여 최적의 파라미터 값을 추출한다. 시선 추적의 정확도에 대한 실험 결과 짧은 시간으로 특정지점을 응시할 경우 시선 추적의 정확도가 낮게 측정되지만, 응시 시간을 2초 이상의 유지 시 80% 이상의 높은 시선 추적 정확도가 측정됨을 알 수 있었다.

• 한국대기환경학회지
• /
• 제25권3호
• /
• pp.219-236
• /
• 2009

Particle-phase organic tracers (molecular markers) have been shown to be an effective method to assess and quantify the impact of sources of carbonaceous aerosols. These molecular markers have been used in chemical mass balance (CMB) models to apportion primary sources of organic aerosols in regions where the major organic aerosol source categories have been identified. As in the case of all CMB models, all important sources of the tracer compounds must be included in a Molecular Marker CMB (MM-CMB) model or the MMCMB model can be subject to biases. To this end, the application of the MM-CMB models to locations where reasonably accurate emissions inventory of organic aerosols are not available, should be performed with extreme caution. Of great concern is the potential presence of industrial point sources that emit carbonaceous aerosols and have not been well characterized or inventoried. The current study demonstrates that emissions from industrial point sources in the St. Louis, Missouri area can greatly bias molecular marker CMB models if their emissions are not correctly addressed. At a sampling site in the greater St. Louis Area, carbonaceous aerosols from industrial point sources were found to be important source of carbonaceous aerosols during specific time periods in addition to common urban sources (i.e. mobile sources, wood burning, and road dust). Since source profiles for these industrial sources have not been properly characterized, method to identify time periods when point sources are impacting a sampling site, needs to avoid obtaining biases source apportionment results. The use of real time air pollution measurements, along with molecular marker measurements, as a screening tool to identify when point sources are impacting a receptor site is presented.

• 한국연초학회지
• /
• 제37권1호
• /
• pp.25-33
• /
• 2015

Genome walking is a par ticular application for identifying sequences of unknown genomic regions adjacent to a known region. Many genome walking methods based on polymerase chain reaction (PCR) are available. Even if earlier techniques suffer from low reproducibility, inefficiency, and non-specificity, improved strategies have been developed. In this study, we present an alternative strategy: the genomic DNA is digested with restriction enzymes. After cytosine overhangs at 5' ends, the fragments are ligated to linker adaptor s had guanine overhang at 3' ends. Then nested PCR is performed. The improvements in this strategy focus on two points. The first is the C tailing method using Pfu polymerase instead of the A tailing method based on nontemplate-dependent terminal transferase activity of Taq polymerase. Therefore unintended modification of target DNA can be prevented without A tailing error. The second point is the use of C/G-specific ligation had advantage in the ligation efficiency compared with A/T-specific ligation. Therefore, the C-G linker PCR method increases ligation efficiency between digested genomic DNA and adaptor DNA. As a result, the quantity of target DNA to amplify by PCR is enriched. We successfully used G-C linker PCR to retrieve flanking regions bordering the phophinothricin resistance gene in genetically modified tobacco (GMO).

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.212-217
• /
• 2021

Premature contraction arrhythmia is the most common disease among arrhythmia and it may cause serious situations such as ventricular fibrillation and ventricular tachycardia. Most of arrhythmia clasification methods have been developed with the primary objective of the high detection performance without taking into account the computational complexity. Also, personalized difference of ECG signal exist, performance degradation occurs because of carrying out diagnosis by general classification rule. Therefore it is necessary to design efficient method that classifies arrhythmia by analyzing the persons's physical condition and decreases computational cost by accurately detecting minimal feature point based on only QRS features. We propose method for personalized specific classification of premature contraction arrhythmia based on QRS features in smart healthcare environments. For this purpose, we detected R wave through the preprocessing method and SOM and selected abnormal signal sets.. Also, we developed algorithm to classify premature contraction arrhythmia using QRS pattern, RR interval, threshold for amplitude of R wave. The performance of R wave detection, Premature ventricular contraction classification is evaluated by using of MIT-BIH arrhythmia database that included over 30 PVC(Premature Ventricular Contraction) and PAC(Premature Atrial Contraction). The achieved scores indicate the average of 98.24% in R wave detection and the rate of 97.31% in Premature ventricular contraction classification.

• 보존과학연구
• /
• 통권26호
• /
• pp.127-139
• /
• 2005

We have conserved the sword with round pommel with a tri-ring which was excavated from No. 1 tomb of the Duckcheon-ri at the Gyeongju and requested from Jungang Research Center of the Cultural Heritage. When this artifact excavated, it was pressed flat state because of the influence of earth pressure and stuck to a gravel and soil laid scattered on the wooden coffin. If the artifacts is handled without plan, it can be damaged, therefore that sword was collected together with soil using the Polyurethane foam. After the artifact which had a weak specific and was collected using a this method can be safetly collected as below; First, we made the supporter of article ordered using a silicon and gypsum. The silicon can conserve the weak point of the artifact because it has a flexible and smooth properties and the gypsum can adhere closely to the artifact because it has a little expansion and shrinking but a hard and fluid characters. Consequently, gypsum is a good complement to the weak point of the silicon. Second, During a remove gauze and a reinforcing agent from the surface of a artifact which was reinforced using a acetone steam method. The acetone steam method can be supplement to a dangerous problem of acetonedircet method because this can be damaged in a surface of the artifact.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.755-765
• /
• 2015

A thermostatically controlled load (TCL) can be one of the most appropriate resources for demand response (DR) in a smart grid environment. DR capability can be effectively implemented in a TCL with various intelligent control methods. However, because traditional on-off control is still a commonly used method in a TCL, it is useful to develop a method for adding DR capability to the TCL with an existing on-off controller. As a specific realization of supervisory control for implementing DR capability in the TCL, two methods are proposed - a method involving the changing of a set point and a method involving the paralleling of an identified system without delay. The proposed methods are analyzed through the simulations with an electric heater for different power consumption levels in the on-state. Considerable cost benefit can be achieved with the proposed methods when compared with the case without DR. In addition, the observations suggest that a medium power consumption level, instead of the maximum power, in the on-state should be used for consistently obtaining the cost benefit without severe temperature deviation from the specified temperature range for DR.