• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.2 s.12
• /
• pp.133-141
• /
• 1998

Terrain modelling is composed of a method using the rectangular grid and another using the triangulated irregular network. The method using the triangulated irregular network is most widely used because it can express the characteristics of the terrain well with only a small amount of information on the terrain and also reduces the rendering time. The process of extracting the surface-specific point and a triangular process is needed to construct such triangulated irregular network. This paper concentrates on the process of extracting the surface-specific point. The 8-direction neighborhood method and other transformed methods of the former method are frequently used to extract the surface-specific point. Another method which eliminates the unnecessary points using the Polygon reduction method is also suggested However, the 8-direction neighborhood method has a big fault of also drawing out some unnecessary points. To resolve such problem, we suggest a method of extracting the surface-specific point using the cross section of the terrain. This method reduces the time to extract the surface-specific point and enables a more precise extraction with less terrain information.

• International Journal of Fluid Machinery and Systems
• /
• v.4 no.1
• /
• pp.133-139
• /
• 2011

In this paper, Based on Two-dimensional Flow Theory, adopting quasi-orthogonal method and point-by-point integration method to design the impeller of the low specific speed centrifugal pump by code, and using RANS (Reynolds Averaged N-S) Equation with a standard k-${\varepsilon}$ two-equation turbulence model and log-law wall function to solve 3D turbulent flow field in the impeller of the low specific speed pump. An analysis of the influences of the blade profile on velocity distributions, pressure distributions and pump performance and the investigation of the flow regulation pattern in the impeller of the centrifugal pump are presented. And the result shows that this method can be used as a new way in low speed centrifugal pump impeller design.

• Journal of Korean Society for Quality Management
• /
• v.20 no.1
• /
• pp.33-38
• /
• 1992

Consider a situation that a specific treatment is regarded as the best in comparing several treatments. In this case, a natural procedure to decide the best treatment is to choose the specific one which is proved to be better than each one of the others. This study proposes a method for detecting the best by comparing two treatments from the above point of view. Since this method deals with comparing only two treatments, it is very simple to use and expected to be widely applicable.

• Progress in Medical Physics
• /
• v.28 no.3
• /
• pp.111-121
• /
• 2017

Verification of dose distribution is an essential part of ensuring the treatment planning system's (TPS) calculated dose will achieve the desired outcome in radiation therapy. Each measurement have uncertainty associated with it. It is desirable to reduce the measurement uncertainty. A best approach is to reduce the uncertainty associated with each step of the process to keep the total uncertainty under acceptable limits. Point dose patient specific quality assurance (QA) is recommended by American Association of Medical Physicists (AAPM) and European Society for Radiotherapy and Oncology (ESTRO) for all the complex radiation therapy treatment techniques. Relative and absolute point dose measurement methods are used to verify the TPS computed dose. Relative and absolute point dose measurement techniques have a number of steps to measure the point dose which includes chamber cross calibration, electrometer reading, chamber calibration coefficient, beam quality correction factor, reference conditions, influences quantities, machine stability, nominal calibration factor (for relative method) and absolute dose calibration of machine. Keeping these parameters in mind, the estimated relative percentage uncertainty associated with the absolute point dose measurement is 2.1% (k=1). On the other hand, the relative percentage uncertainty associated with the relative point dose verification method is estimated to 1.0% (k=1). To compare both point dose measurement methods, 13 head and neck (H&N) IMRT patients were selected. A point dose for each patient was measured with both methods. The average percentage difference between TPS computed dose and measured absolute relative point dose was 1.4% and 1% respectively. The results of this comparative study show that while choosing the relative or absolute point dose measurement technique, both techniques can produce similar results for H&N IMRT treatment plans. There is no statistically significant difference between both point dose verification methods based upon the t-test for comparing two means.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.4
• /
• pp.729-736
• /
• 2013

Power grids are large complicated networks in use around. An absolute phase value for a particular unknown-phase line at a local site should be identified for the operation and management of a 3-phase distribution network. The phase shift for a specific point in the line, as compared with a phase reference point at a substation, must be within a range of ${\pm}60^{\circ}$ for correct identification. However, the phase shift at a particular point can fluctuate depending on the line constants, transformer wiring method, line length, and line amperage, etc. Conducted in this study is a theoretical formulation for the determination of phase at a specific point in the line, Simulink modeling, and analysis for a distribution network. In particular, through evaluating the effects of unbalanced current loads, the limitations of the present phase identification methods are described.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.90.1-90
• /
• 2002

Counters for the various kinds of bank notes require high-speed distinctive point extraction and recognition for notes. In this paper we propose a new point extraction and recognition algorithm for bank notes. For distinctive point extraction we use a coordinate data extraction method from specific parts of a bank note representing the same color. The recognition algorithm uses a back-propagation neural network that has coordinate data input. The proposed algorithm is designed to minimize recognition time.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.227-230
• /
• 2006

The $St{\ddot{o}}ckigt$ sizing test of the most-commonly used sizing tests is easily influenced by the individual testers' bias in recognizing red coloration. Therefore the test had to be modified to improve its reliability and reproducibility by automated recognition of a coloration procedure during testing. In order to achieve this, all measured variables occurring during the $St{\ddot{o}}ckigt$ test was first be analyzed and then reflected in the new automatic system. Secondly, the most important principle applied was to transform the RGB values of the droplet image to hue (H), saturation (S) and value (V) respectively. This is because RGB cannot be used as a color standard, owing to RGB's peculiarity of being seriously affected by the observer's point of view. Therefore, the droplet color had to be separated into three distinct factors, namely the HSV values, in order to allow linear analysis of the droplet color. When the average values of the vectors calculated during color variation from yellow to brown were plotted against time, it was possible to determine the vector value of hue, the most sensitive factor among HSV, at the specific time by differentiation of a function when it exceeds the critical point. Then, the specific time consumed up to the critical point was regarded as the $St{\ddot{o}}ckigt$ sizing degree. The conventional method took more time to recognize an ending point of coloration than the automatic method, and in addition the error ranges of the conventional sizing degrees on the specific addition points of AKD were wider than those of the automatic method.

• BMB Reports
• /
• v.46 no.5
• /
• pp.270-275
• /
• 2013

It is essential to analyze rare mutations in many fields of biomedical research. However, the detection of rare mutations is usually failed due to the interference of predominant wild-type DNA surrounded. Herein we describe a sensitive and facile method of detecting rare point mutation on the basis of allele-specific amplification in emulsion PCR. The identification and selective amplification of rare mutation are accomplished in one-pot reaction. The allele-specific primers coupled on magnetic beads allow the exclusive amplification and enrichment of the mutant amplicons. The productive beads bearing mutant amplicons are subsequently stained with the fluorescent dyes. Thus, the rare point mutations with a percentage as low as 0.1%, can be detected by fluorescent analysis. The relative percentages of mutation among different samples can be roughly accessed by counting the fraction of fluorescent positive beads through flow cytometry.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.6
• /
• pp.38-46
• /
• 2012

In this paper, the necessity for the identification of the absolute phase value is introduced and analyzed for a particular conductor line of a 3-phase type distribution network and the recent methods are also introduced. For the determination of the exact phase value for a specific point in the line, as compared with the phase reference point, the measured phase value must be within a range of ${\pm}60[^{\circ}]$. However, the phase of a particular point can fluctuate depending on the line constant, transformer wiring method, line length, line amperage, etc. A theoretical formulation such as Simulink modeling and analysis for a distribution network are conducted for the identification of phase at a specific point in the line. In particular, through evaluating the effects of unbalanced current loads at the time of determination of the phase value, the limitations of the present method for the determination of phases is described.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.1
• /
• pp.1-6
• /
• 2013

Tetanus is a specific infectious disease, which is often associated with catastrophic events such as earthquakes, traumas, and war wounds. The obligate anaerobe Clostridium tetani is the pathogen that causes tetanus. Once the infection of tetanus progresses to an advanced stage within the wounds of limbs, the rates of amputation and mortality increase manifold. Therefore, it is necessary to devise a rapid and sensitive point-of-care detection method for C. tetani so as to ensure an early diagnosis and clinical treatment of tetanus. In this study, we developed a detection method for C. tetani using loop-mediated isothermal amplification (LAMP) assay, wherein the C. tetani tetanus toxin gene was used as the target gene. The method was highly specific and sensitive, with a detection limit of 10 colony forming units (CFU)/ml, and allowed quantitative analysis. While detecting C. tetani in clinical samples, it was found that the LAMP results completely agreed with those of the traditional API 20A anaerobic bacteria identification test. As compared with the traditional API test and PCR assay, LAMP detection of C. tetani is simple and rapid, and the results can be identified through naked-eye observation. Therefore, it is an ideal and rapid point-of-care testing method for tetanus.