DOI QR코드

DOI QR Code

Phase Shift Analysis and Phase Identification for Distribution System with 3-Phase Unbalanced Constant Current Loads

  • Byun, Hee-Jung (Dept. of Information and Telecommunication Engineering, The University of Suwon) ;
  • Shon, Sugoog (Dept. of Information and Telecommunication Engineering, The University of Suwon)
  • Received : 2012.03.29
  • Accepted : 2013.03.08
  • Published : 2013.07.01

Abstract

Power grids are large complicated networks in use around. An absolute phase value for a particular unknown-phase line at a local site should be identified for the operation and management of a 3-phase distribution network. The phase shift for a specific point in the line, as compared with a phase reference point at a substation, must be within a range of ${\pm}60^{\circ}$ for correct identification. However, the phase shift at a particular point can fluctuate depending on the line constants, transformer wiring method, line length, and line amperage, etc. Conducted in this study is a theoretical formulation for the determination of phase at a specific point in the line, Simulink modeling, and analysis for a distribution network. In particular, through evaluating the effects of unbalanced current loads, the limitations of the present phase identification methods are described.

Keywords

References

  1. John McDonald, "Electric Power Substations Engineering," 2nd, CRC Press, 2007
  2. Bouvrette, Michel, "Telephasing method and system for remotely identifying unknown phases of transmission or distribution lines within an electrical network," US Patent 4626622, 1986.
  3. Pomatto, Lawrence A. "Apparatus and method for identifying the phase of a three phase power line at a remote location," US Patent 5510700, 1996.
  4. K.E. Martin, et al., "IEEE Standard for Synchrophasers for Power Systems", IEEE Transactions on Power Delivery, Vol. 13, No. 1, pp. 73-77, Jan. 1998. https://doi.org/10.1109/61.660853
  5. Apparatus and method for identifying cable phase in a three-phase power distribution network, Gregory H. Piesinger, US Patent 7,031,859, 2006.
  6. "Distribution System Modeling and Analysis"; William H. Kersting; CRC Press, 2002.
  7. Jae-Jo Lee and Sugoog Shon, "Analysis and Implementation for Phase Identifications of Power Lines", Information, an International Interdisciplinary Journal, pp. 507-5515, Vol. 13, No. 2, March, 2010.
  8. Lifeng Huang, Power Line Communications (PLC) Home Network System, INFORMATION : An International Journal, Vol.11, No.1, January, 2008.
  9. ChulSoo Lee, Seng-phil Hong, Sungmin Kang and Jaehyoun Kim, The Study on the Information Security Audit Guideline for SCADA System, INFORMATION : An International Journal, Vol. 12, No. 1, January, 2009.
  10. Minxue Gao, Nation Wealth: Is it an Effective Measurement of Sustainable Development, INFORMATION: An International Journal, Vol. 4, No. 3, July, 2001.
  11. MATLAB Simulink manuals.
  12. "A simple method to measure phase difference between sinusoidal signals", Fabio Luiz Bertotti, Marcos Santos Hara, and Paulo Jose Abatti, Rev. Sci. Instrum. 81, 115106 (2010); doi: 10. 1063/1.3498897 (4pages). https://doi.org/10.1063/1.3498897
  13. IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems, IEEE Std-142-1991, 1992.
  14. Carson, J. R., "Wave propagation in overhead wires with ground return", Bell System Technical Journal, 5, 1926.
  15. Kron, G., "Tensorial analysis of integrated transmission systems", AIEE Transactions, 71, 1952.
  16. W. G. Zhang. etc, "Application of Wavelet Packet Analysis in Phase-to-Ground Fault Detection of Distribution Power System", The International Conference on Electrical Engineering, 2009.
  17. J. K. Kim, "A New Analysis for Load Unbalance Factor", The Transactions of the Korean Institute of Electrical Engineers, Vol. 55, No. 2, pp. 67-72, 2006.

Cited by

  1. New Identification Method for Power Transformer and Phase in Distribution Systems vol.878, pp.1662-7482, 2018, https://doi.org/10.4028/www.scientific.net/AMM.878.291