• 한국공간구조학회논문집
• /
• 제14권2호
• /
• pp.41-50
• /
• 2014

The stone pagoda of Mireuk temple site is currently restoring through the repairing process. This stone pagoda has the various construction types in the inner and outer space. Therefore, the stress concentration and structural behavior need to be considered through the analysis of various construction patterns. To this end, this study presents the structural modelling and analysis considering the discrete element analysis technique to solve the discontinuum behavior between the stone elements. Also, this study performs the structural performance evaluation through the various design variables for the safety of stone pagoda. Through the analysis results, we can find out the small stress concentration in the several members. But, because the stresses and displacements are relatively small, we can secure the safety of the whole structure.

• 한국공간구조학회논문집
• /
• 제17권2호
• /
• pp.63-70
• /
• 2017

In Korea, the occurrence frequency of earthquakes has recently increased, compared with the past. So, the various damages for cultural properties due to earthquake can be expected, and especially fortress structure is vulnerable to earthquake. Therefore, the resonable seismic characteristics evaluation is required to secure the safety for fortress structure with the various construction and configuration types. Also, we should consider the various applied load conditions as design variables. To this end, this study classifies fortress structures according to the construction and configuration types, and then applies the discrete element method to model and analyze fortress structures. Finally, the seismic characteristics is evaluated through slip condition due to the analysis results considering the various design variables.

• 한국공간구조학회논문집
• /
• 제17권2호
• /
• pp.71-77
• /
• 2017

In this study, the boundary non-linear analysis of the sky bridge subjected to walking load and running load is performed. The sky bridge is installed in the mid-story between two buildings and the walking load and running load induced by pedestrians are measured by load cell. LRB is modeled as a non-linear hysteresis model to accurately represent the behavior of LRB. For the serviceability evaluation of sky bridge, the acceleration responses of sky bridge are analyzed based on ISO 2631-2 and the velocity response are analyzed based on standards Bachmann &Amann. In serviceability evaluation of this sky bridge, the pedestrian can not perceive the vibration except for resonance running loads consequently. Therefore, it is concluded that this sky bridge haven't problem in the serviceability.

• 지구물리
• /
• 제6권2호
• /
• pp.89-97
• /
• 2003

For safety evaluation of a rockfill dam, it is often necessary to investigate spatial distribution and dynamic characterization of weak zones such as fractures. For this purpose, both seismic and electric methods are adopted together in this research. The former employs the multichannel analysis of surface waves (MASW) method, and aims at the mapping of 2-D shear-wave velocity (Vs) profile along the dam axis that can be associated with dynamic properties of filled materials. The latter is carried out by DC- resistivity survey with a main purpose of mapping of spatial variations of physical properties of dam materials. Results from both methods are compared in their signature of anomalous zones. In addition, downhole seismic survey was carried out at three points within the seismic survey lines and results by downhole seismic survey are compared with the MASW results. We conclude that the MASW is an efficient method for dynamic characterization of dam-filling materials, and also that joint analyses of these two seemingly unrelated methods can lead to an effective safety evaluation of rock-fill dam.

• 한국공간구조학회논문집
• /
• 제18권4호
• /
• pp.23-30
• /
• 2018

The purpose of this study is to evaluate the structural safety of cultural altar since its bearing capacity has been questioned due to weathering damages and sectional defections. This evaluation process consists two stages; which the first is field investigation and the second is structural modeling and analysis. Based on field investigation, all of the structural members supporting the altar were carefully examined and all the findings were accounted for the development of the structural modeling using the Midas computer program. Using a 3D scanner, the weight of the Buddha statue was applied to the structural modeling. Then, according to the allowable stress design method of KBC2016, the structural safety was evaluated. Based on this result, replacements of several structural members were recommended to increase the structural safety and value of cultural property.

• 한국공간구조학회논문집
• /
• 제23권1호
• /
• pp.77-84
• /
• 2023

In this study, the performance evaluation of the RC frame specimen (RV2) which was strengthened by a steel frame and a steel damper with the lateral deformation prevention details proceeded. The comparison objects are bare frame specimen (BF), RV2 and AWD, where AWD is a specimen reinforced with steel damper and aramid fiber sheets. In the evaluation of envelope curve, stiffness degradation, and energy dissipation capacity, RV2 was evaluated to have excellent capacity as a whole. To evaluate the strengthening effect of the steel frame based on the maximum strength and energy dissipation capacity, it was evaluated to have a 38% of the RV2's capacity.

• 한국환경복원기술학회지
• /
• 제22권2호
• /
• pp.73-92
• /
• 2019

The purpose of this study is to establish the conservation and restoration areas for sustainable stream management by reflecting the ecological health, cultural characteristics, and the citizens' needs for stream uses. Therefore, we extended spatial ranges of stream evaluation to riparian areas in addition to stream sections. The evaluation indexes are stream naturalness, availability, biota assessment, and riparian characteristics such as land uses and legally protected areas. The grading system was unified with five classes. The spatial evaluation units for stream section are classified as right and left for laterally and 500m for longitudinally. For riparian areas, 30m and 100m of distance from the edge of stream are applied as spatial evaluation units. The six types of stream sections for management are conservation sections(priority/general) and restoration sections(priority/general) for ecological landscape and core and general sections for cultural landscape. The established system for evaluation and designating areas for stream management was applied to Jeonjucheon and Samcheon in Jeonju-si, and the conservation and restoration areas were designated reflecting the characteristics of urban and non-urban areas and left and right of stream sections. The results of this study will provide detailed guidelines for designating stream sections and practical management strategies for sustainable urban stream management.

• Journal of Forest and Environmental Science
• /
• 제30권1호
• /
• pp.91-100
• /
• 2014

This research was conducted on the conservation area of Baekdudaegan, Kangwondo under the purpose of evaluating bio-diversity according to the changes of spatial scale, using GIS data and spatial filtering method. The diversity index was calculated based on the information of species of The $5^{th}$ forest type map using Shannon-weaver index (H'), evenness index ($E_i$) and richness index ($R_i$). The diversity index was analyzed and compared according to the changes of 12 spatial scales from Kernel size $3{\times}3$ to $73{\times}73$ and basin unit. As for H' and $R_i$, spatial scale increased as diversity index decreased, while $E_i$ decreases gradually. H' and $R_i$ was highest; each 1.1 and 0.6, when the Kernel size was $73{\times}73$, while $E_i$ was 0.2, the lowest. When you look at according to the basin unit, for large basin unit, 'YeongDong' region shows higher diversity index than 'YeongSeo' region. For middle basin unit, 'Gangneung Namdaecheon' region, and for small basin unit, 'Gangneung Namdaecheon' and 'Gangneung Ohbongdaem' region shows high diversity index. When you look at the relationship between diversity index and Geographic factors, H' shows positive relation to curvature and sunshine factor while shows negative to elevation, slope, hillshade, and wetness index. Also $E_i$ was similar to the relationship between H' and Geographic factor. Meanwhile, $R_i$ shows positive relationship to curvature and sunshine factor, while negative to elevation, slope, hillshade, and wetness index. macro unit diversity index evaluation was possible through the GIS data and spatial filtering, and it can be a good source for local biosphere conservation policy making.

• 한국산업융합학회 논문집
• /
• 제26권4_2호
• /
• pp.669-678
• /
• 2023

Recently, spatial information has been applied to various fields and its usability is increasing day by day. In particular, in the field of civil engineering and construction, BIM based on spatial information is being applied to all construction industries and related research has been conducted. BIM is a technology that utilizes spatial information from the design phase and aids in the construction and maintenance of buildings, including the management of their attributes. However, to apply BIM technology to existing buildings, it takes a lot of time and money to produce models based on design drawings along with current surveying. In this study, quantitative and qualitative analysis was conducted to determine the applicability of the acquired data and the applicability of BIM by generating data and analyzing the accuracy using UAV images and ground lidar, which are representative spatial information acquisition methods. Quantitative analysis revealed that TLS (Terrestrial Laser Scanner) showed reliable accuracy in both planar and elevation measurements, whereas unmanned aerial images exhibited lower accuracy in elevation measurements, resulting in reduced reliability. Qualitative analysis indicated that neither TLS nor unmanned aerial images alone provided perfect completeness. However, the combination of both spatial information sources, tailored to specific needs, resulted in the most comprehensive completeness. Therefore, it is concluded that the appropriate utilization of spatial information acquired through unmanned aerial images and TLS holds the potential for application in the fields of BIM and reverse engineering.

• 한국실내디자인학회논문집
• /
• 제38호
• /
• pp.65-74
• /
• 2003

The purpose of this study Is to find out the design guideline for women's hospital focusing on the patient needs. The results of research are as follows: 1) As a basic frame of evaluation model, the quality of service of medical facilities and patients' reaction to the physical environment are fixed as a variable called' satisfaction degree'. This study analyzes the influence on space efficiency evaluation according to the difference of types through basic model (Model I-1,2) as verification model to identify the difference between satisfaction degree of outpatients and that of inpatients. 2) The difference of satisfaction degree about the hospital facilities by space evaluation matrix is according to the types of inpatients and to space importance. 3) The control of importance degree about the interior facilities of the hospital according to the specific character of the hospital is necessary. Maintenance of the status quo, or reduction, or expansion is needed according to the satisfaction degree corresponding to the importance degree. Finally, the model is used to for the planning & design for the future women's hospital.