• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.79-87
• /
• 2009

Pot experiments using sand culture were conducted in 2004 under greenhouse conditions to evaluate the effect of nitrogen deficiency on red pepper biomass. Nitrogen stress was imposed by implementing 6 levels (40% to 140%) of N in Hoagland's nutrient solution for red pepper. Canopy reflectance measurements were made with hand held spectral sensors including $GreenSeeker^{TM}$, $Crop\;Circle^{TM}$, and $Field\;Scout^{TM}$ Chlorophyll meter, and a spectroradiometer as well as Minolta SPAD-502 chlorophyll meter. Canopy reflectance and dry weight of red pepper were measured at five growth stages, the 30th, 40th, 50th, 80th and 120th day after planting(DAT). Dry weight of red pepper affected by nitrogen stress showed large differences between maximum and minimum values at the 120th DAT ranged from 48.2 to $196.6g\;plant^{-1}$, respectively. Several reflectance indices obtained from $GreenSeeker^{TM}$, $Crop\;Circle^{TM}$ and Spectroradiometer including chlorophyll readings were compared for evaluation of red pepper biomass. The reflectance indices such as rNDVI, aNDVI and gNDVI by the $Crop\;Circle^{TM}$ sensor showed the highest correlation coefficient with dry weight of red pepper at the 40th, 50th, and 80th DAT, respectively. Also these reflectance indices at the same growth station was closely correlated with dry weight, yield, and nitrogen uptake of red pepper at the 120th DAT, especially showing the best correlation coefficient at the 80th DAT. From these result, the aNDVI at the 80th DAT can significantly explain for dry weight of red pepper at the 120th DAT as well as for application level of nitrogen fertilizer. Consequently ground remote sensing as a non-destructive real-time assessment of plant nitrogen status was thought to be a useful tool for in season nitrogen management for red pepper providing both spatial and temporal information.

• The Journal of the Korea Contents Association
• /
• v.17 no.7
• /
• pp.283-293
• /
• 2017

This study analyzed the actual conditions of use of public sports facilities and characteristics of the users of the facilities through surveys and measured the spatial imbalance of the public sports facilities currently supplied by using gravity potential model. This study also suggests evaluation criteria that may be considered for efficient location selection by examining the change of accessibility to the facilities that meet the needs of users in the future. As the results of the questionnaire survey, unlike current usage, the users hoped for badminton, weight training and swimming. And we could confirm the demand for the expansion of the multi - purpose indoor gym which can carry out such activities in the areas. As the result of the analysis on the difference in accessibility of the public sports facility, there were some large variations in the regions. It was found that a balanced supply of facilities was needed in terms of equity. In particular, when analyzing by considering the population estimates of 2025, It is analyzed that the accessibility will be reduced to about 60% compared to that of 2015. In addition, it is evaluated as the best alternative in terms of overall efficiency that the location of the facilities should be in Munsan area where population growth is expected in the future.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.1
• /
• pp.37-51
• /
• 2017

Despite the improvement in accuracy of heavy rain forecasting, socioeconomic costs due to heavy rain hazards continue to increase. This is due to a lack of understanding of the effects of weather. In this study, the risk of heavy rain hazard was analyzed using the concepts of hazard, vulnerability, and exposure, which are key concepts of impact forecast presented by WMO. The potential impacts were constructed by the exposure and vulnerability variables, and the hazard index was calculated by selecting three variables according to the criteria of heavy rain warning. Weights of the potential impact index were calculated by using PCA and hazard index was calculated by applying the same weight. Correlation analysis between the potential impact index and damages showed a high correlation and it was confirmed that the potential impact index appropriately reflects the actual damage pattern. The heavy rain hazard risk was estimated by using the risk matrix consisting of the heavy rain potential impact index and the hazard index. This study provides a basis for the impacts analysis study for weather warning with spatial/temporal variation and it can be used as a useful data to establish the local heavy rain hazard prevention measures.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.4
• /
• pp.47-55
• /
• 2008

This paper deals with basic theories and some numerical results on structural optimization for geodesic dome. First of all, the space efficiency of geodesic dome is investigated by using the ratio of icosahedron's surface area to the internal volume enclosed by it. The procedure how to create the geodesic dome is also provided in systematic way and implemented and utilized into the design optimization code ISADO-OPT. The mathematical programming technique is introduced to find out the optimum pattern of member size of geodesic dome against a point load. In this study, total weight of structure is considered as the objective function to be minimized and the displacement occurred at loading point and member stresses of geodesic dome are used as the constraint functions. The finite difference method is used to calculate the design sensitivity of objective function with respect to design variables. The SLP, SQP and MFDM available in the optimizer DoT is used to search optimum member size patterns of geodesic dome. It is found to be that the optimum member size pattern can be efficiently obtained by using the proposed design optimization technique and numerical results can be used as benchmark test as a basic reference solution for design optimization of dome structures.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2014

Butyltin compounds (BTs) were determined in surface sediment samples from Ulsan Bay in 2009 and 2011, to assess the contamination status and the effectiveness of tributylin (TBT) restriction of Korea. Dibutyltin and TBT concentrations in sediments in 2011 ranged from 19.5 to 980 and 14.2 to 1204 ng Sn $g^{-1}$ dry weight, respectively. The highest TBT concentration was found in a big shipyard complex and the next highest was found in harbor, suggesting that harbor and shipyard activities are a major contamination source of TBT in Ulsan Bay. Concentrations of BTs in Ulsan Bay sediments were significantly lower in 2009 and 2011 than that in 2003 survey previously reported, probably as a consequence of the legislative action in Korea. However, TBT concentrations in sediments still exceeded ecotoxicological values. Therefore, it will be important to monitor and reduce TBT contamination in sediments until the levels fall well below ecotoxicological levels.

• Journal of Korean Association for Spatial Structures
• /
• v.11 no.4
• /
• pp.79-88
• /
• 2011

Recently, complex-shaped tall buildings represented by 3T(Twisted, Tapered, Tilted) are planed largely. A diagrid structural system is one of the most widely used structural system for complex-shaped tall buildings because of its structural efficiency and formativeness. Plans for tilted tall buildings are largely presented because of beauty of a sculpture and many of buildings use diagrid structural systems. Lateral displacements of tilted tall buildings are induced by not only lateral loads but also self weight. Therefore, reduction of lateral responses of tilted tall buildings is as important as typical tall buildings. In this study, a smart TMD is introduced to reduce seismic responses of tilted diagrid tall buildings and its control performance is evaluated. MR damper is employed for the smart TMD and ground-hook controller is used as a control algorithm for the smart TMD. 100-story tall building is used as an example structure. Control performances of uncontrolled case, controlled case with TMD and controlled case with smart TMD are compared and investigated. Numerical simulation has shown that smart TMD presented good control performance for displacement response but acceleration response was not controlled well.

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.3
• /
• pp.45-51
• /
• 2008

A single layer-latticed dome is advantageous for large span structures because it is very stiff despite the light weight of the structure itself. However, this structure becomes easily unstable during erection due to its large size. The Block method is popular with the large span structures. A partial block of the dome is fabricated on the ground and lifted by crane to a designated location of structures. The lifting point selection is very important to create a stable erection and to avoid buckling of members during the erection. The purpose of this study is to analyze the structural behaviors and buckling characteristics according to the lifting point of single-layer latticed domes with triangle network in order to take materials about the safe and economic erection. The conclusions are obtained as follow. 1) The buckling strength of the block part varies with the location of lifting points when it is erected. In case, the height of the dome is lower, the effort of buckling strength of the structure is higher. 2) In buckling strength, the effect of the lifting rope length is smaller than it of the lifting points change.

• Journal of Gifted/Talented Education
• /
• v.15 no.1
• /
• pp.67-84
• /
• 2005

In this study we investigated the adequacy of tools for distinction gifted students through the comparison these mutual relation on the basis of data, like paper test, the depths interview score, and the rest data((TTCT: Torrance Tests of Creative Thinking, IQ test, FASP: Find A Shape Puzzle, V.T: Visualization Tests and Exp: experimental ability test), and analysis data of EEG test for examining the adequacy of tools for identification gifted students. So, we developed Brain Wave gifted Index(G-Index) for finding another distinction ability as using brain waves data. The standard of index development use gifted brain characteristic in closed-eyes rest state which is judged like that characteristic of distinction between gifted and normal students is the most clear and consistence. That is, the degree of unified pattern between each object and gifted PCA pattern was defined by Pearson method which added spatial mutual index to weight concept. This refer to mean number of spatial PCA pattern. Searching for the possibility of distinction gifted gave distinction effect in 76%. The result of regression analysis on the basis of mutual relation between the rest data is . The probability formula for distinct gifted group is as follow. $$P=\frac 1{1+e^{-[-0.018(TTCT)+0.057(IQ)+1.916(FASP)+0.682(V.T)+0.088(Exp.)+0.034(G-Index)-57.510]}}$$ The result of this calculation showed that probability for distinct in gifted group was very good(95.0%). On the basis of upper result, tools for identification gifted students should be estimated as using many-sided estimation data whatever possible. And following study about development, and operation of tools for distinction suitable to gifted student in science should be progressed.

• Journal of Korea Water Resources Association
• /
• v.54 no.2
• /
• pp.121-133
• /
• 2021

Suspended Solids (SS) generated in rivers are mainly introduced from non-point pollutants or appear naturally in the water body, and are an important water quality factor that may cause long-term water pollution by being deposited. However, the conventional method of measuring the concentration of suspended solids is labor-intensive, and it is difficult to obtain a vast amount of data via point measurement. Therefore, in this study, a model for measuring the concentration of suspended solids based on remote sensing in the Nakdong River was developed using Sentinel-2 data that provides high-resolution multi-spectral satellite images. The proposed model considers the spectral bands and band ratios of various wavelength bands using a machine learning model, Support Vector Regression (SVR), to overcome the limitation of the existing remote sensing-based regression equations. The optimal combination of variables was derived using the Recursive Feature Elimination (RFE) and weight coefficients for each variable of SVR. The results show that the 705nm band belonging to the red-edge wavelength band was estimated as the most important spectral band, and the proposed SVR model produced the most accurate measurement compared with the previous regression equations. By using the RFE, the SVR model developed in this study reduces the variable dependence compared to the existing regression equations based on the single spectral band or band ratio and provides more accurate prediction of spatial distribution of suspended solids concentration.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.33 no.1
• /
• pp.5-11
• /
• 1988

Varietal differences of grain filling duration and rate are generally recognized in rice (Oryza sativa L.). But the differences of grain filling characteristics between the parts within a panicle might be present since it takes 6-8 days to finish anthesis in a panicle. To elucidate this, 6 Japonica and 6 Japonica/Indica varieties were grown under three nitrogen levels at the Experimental Farm of Chungbuk National University in 1986, and grain filling characteristics of top, middle and bottom parts of a panicle were analyzed. Rice grain filling duration could be divided into 3 phases, i.e., Lag phase(LP) of 5 days after heading. Linear increasing period (LIP) of 5-20 days after heading and Late filling period (LFP) thereafter. Grain weight difference between the panicle parts was greater during LIP in all the varieties and was decreased during LFP. The difference was greater in Japonica/Indica varieties. Samgangbyeo and Seomjinbyeo had the shortest and the longest grain filling durations with 22.6 and 37.1 days, respectively. In average, grain filling duration of the bottom part of a panicle was 1-2 days shorter than that of top or middle part. The differences were negligible in Daecheongbyeo, Taebaegbyeo and Milyang 23, while it was greater in Tongil with 4.9 days. Grain filling rates were ranged from 0.612 to 1.097 mgㆍgrain$^{-1}$ㆍday$^{-1}$ㆍMilyang 23 showed the lowest rate with 0.612-0.682 mgㆍgrain$^{-1}$ㆍday$^{-1}$, while the rates of Baegyangbyeo, Yongmoonbyeo, Samgangbyeo, Nongbaeg and Daeseongbyeo were about 1 mgㆍgrain$^{-1}$ㆍday$^{-1}$ㆍGrain filling rate of bottom part of a panicle was lower than that of top or middle part. The difference was samll in Nongbaeg and Daeseongbyeo, while it was the greatest in Tongil with 0.222 mgㆍgrain$^{-1}$ㆍday$^{-1}$. Grain filling duration and rate were not afftected by nitrogen level, but varietal and spatial differences of grain filling characteristics were highly significant. However, the spatial difference of grain filling rates within a variety was not significant. Grain filling characteristics of each part of a panicle were significantly correlated (r=0.7207-0.9879) with those of a whole panicle.