• Journal of Navigation and Port Research
• /
• v.45 no.3
• /
• pp.130-137
• /
• 2021

The main purpose of this study is to provide an objective evaluation standard for the assessment of marine spatial characteristics via Ulsan floating offshore wind power project using HEA.. Various levels of damage occur in the waters (5,017.6) near the floating offshore wind power terminals in Ulsan, including commercial damage, ecological destruction and reduction in quality of life due to seascape damage. Alternative restoration projects for calculating the economic value of damage were selected including artificial reef projects and estimates based on HEA. For basic households with a 4.5% social discount rate and a 100% maturity index over four years, the damage was approximately 457 hundred million won. The HEA in this study resolves the possible irrationality in the evaluation of marine spatial characteristics, since the value is calculated based on objective and clear DATA. Therefore, the study results are intended to facilitate conflict resolution between stakeholders in the future during the implementation of the marine spatial plan.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.1
• /
• pp.49-54
• /
• 2014

A digital map of 1/5,000 scale provides basic information to be utilized in various businesses, such as in land management, urban information system of a local government, navigation of private sectors and others. 1/5,000 digital map, which contains information of the entire land of South Korea, is performed as a national fundamental map, however, comparing to 1,000 digital map, it has some difficulties in terms of positional accuracy and attribute data for applying in urban areas. Also, since the paradigm of spatial information services has been changed, more accurate positional information and rich attribute information are required for the government businesses and private map services. Particularly, demands for the high precision spatial information based on large-scale digital map is increasing in facility managements due to rapid changes in urban areas and various spatial analyses. For those reasons, this study proposes how to apply and use precise spatial information based on 1/1,000 digital. Firstly, an analysis of legal system related to large-scale digital map and spatial information is conducted in the research. Afterwards, the ways are suggested to improve systematical utilizations of 1/1,000 digital map. We also define existing applications of spatial information in public and private sector, and recommend methodology that can be utilized high precision spatial information.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.61-63
• /
• 2017

The urban space has both aspects that the happy space that guarantees opportunity and comfort is an unfortunate space where poverty, exclusion and deportation proceed simultaneously. In other words, growth and decline are simultaneous within the city, and this phenomenon is more evident in modern society, which is getting more complicated. The harbor space is also affected by the growth and decline of the port industry directly or indirectly in the port area. However, since there is no systematic guideline for development and planning of port space in Korea, the phenomenon of the decline of the rear area, which is made up as if the harbor space has been growing and declining from past to present, is getting worse.

• Spatial Information Research
• /
• v.23 no.3
• /
• pp.113-122
• /
• 2015

Recently, according to developing advanced construction technologies, buildings has been enlarged such as high-rise buildings or complex buildings associated with underground facilities. The number of indoor activity population has increased very quickly. Because of that, technical requirements for Indoor location based service (Indoor LBS) also have been increased. Although indoor networks have to be constructed for efficient LBSs in indoor space based on OGC IndoorGML, it is not suitable for large and complex space to apply the simple network structure to constructing indoor navigation networks. The indoor navigation network has to be constructed according to logical, physical, and functional constraints for indoor space. In order to do that, subspacing methods are required to partition large and complex indoor space into proper size of subspace. In this paper, we proposed the basic requirements of subspacing in indoor space for creating efficient indoor network, as well the work process of subspacing in indoor space.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.235-247
• /
• 2009

Map is information media for human life. Recently, innovative map making technology has been developed and most updated various data are provided to map users. In consequence, use of maps is rapidly increasing in various applications. One of the examples is car navigation map because navigation maps provide reliable and necessary information with convenient way. Therefore, maps are to be changed to user-oriented from map making-oriented design. The main goal of spatial data infrastructure is to allow various users to access the real world information easily for decision making. However, most of the digital maps are focused on map making aspect such as providing up-to-date data, acquisition of accurate data with state-of-the-art technology, and addition of layers (For example, ortho-images and DEMs). If map data processing tools are to be provided with the digital maps, users could utilize maps for decision making without professional software or knowledge. Therefore, objective of this paper is to propose scheme of the digital map data processing service with application examples.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.9-14
• /
• 2006

This paper develops a complete methodology for the mitigation of ionosphere spatial anomalies by GBAS systems fielded in the Conterminous U.S. (CONUS). It defines an ionosphere anomaly threat model based on validated observations of unusual ionosphere events in CONUS impacting GBAS sites in the form of a linear ‘wave front’ of constant slope and velocity. It then develops a simulation-based methodology for selecting the worst-case ionosphere wave front impact impacting two satellites simultaneously for a given GBAS site and satellite geometry, taking into account the mitigating effects of code-carrier divergence monitoring within the GBAS ground station. The resulting maximum ionosphere error in vertical position (MIEV) is calculated and compared to a unique vertical alert limit, or $VAL_{H2,I}$, that applies to the special situation of worst-case ionosphere gradients. If MIEV exceeds $VAL_{H2,I}$ for one or more otherwise-usable subset geometries (i.e., geometries for which the 'normal' vertical protection level, or $VPL_{H0}$, is less than the 'normal' VAL), the broadcast ${\sigma}_{pr_{-}gnd}$ and/or ${\sigma}_{vig}$ must be increased such that all such potentially-threatening geometries have VPL$_{H0}$ > VAL and thus become unavailable. In addition to surveying all aspects of the methods used to generate the required ${\sigma}_{pr_{-}gnd}$ and ${\sigma}_{vig}$ inflation factors for CONUS GBAS sites, related methods for deriving similar results for GBAS sites outside CONUS are suggested.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.600-608
• /
• 2013

The great Tohoku-oki earthquake which occurred on March 11, 2011, caused crustal movements in both Korea and Japan. This study attempts to analyze velocity changes of crustal movement of Korea Peninsula due to the Tohoku-oki earthquake and to compare the calculation with precious crustal movenents of Korea Peninsula. We found that the crustal movement velocity of South Korea increased 3.9 mm/yr northward and 7.5 mm/yr eastward on average as a result of the Tohoku-oki earthquake; when this figure is compared with the past crustal movement velocities of the Korea Peninsula.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.777-783
• /
• 2008

Nowadays wavelet transforms are widely used for the analyses of PIV velocity vector fields. This is bemuse the wavelet provides not only spatial information of the velocity vectors but also of time and frequency domains. In this study, a discrete wavelet trC1f1$form has been applied to real PIV images of bubbly flows. The vector fields obtained by a self-made cross-correlation PIV algorithm were used for the discrete wavelet transform The performances of the discrete wavelet transform is investigated by changing the level of power of discretization. The decomposed images by the wavelet multiresolution showed conspicuous characteristics of the bubbly flows according to the level changes. The high spatial bubble concentrated area could be evaluated by the constructed discrete wavelet transform algorithm, at which high leveled wavelets could play a dominant roles to reveal the flow characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.1
• /
• pp.66-74
• /
• 2007

The most commonly used navigation systems work on Windows CE platforms. Linux-based embedded terminals have price competitiveness, because Linux is a free operation system. In order to develop map services on Linux-based embedded terminals, there were a number of technical hurdles that had to be resolved. Since the Linux-based embedded terminals is a low power, low cost, and small size platform with low processing capabilities, we must have developed the spatial database engine that minimize the number of disk accesses. We solved problems that are the processing korean language and the lack of debugging tools on Linux. In this paper, we has developed the spatial database engine and user interfaces on hand-held terminals based on embedded Linux for implementing the location based map system With view of this implementation results, we confirmed the possibility of using our embedded linux terminal as telematics terminals or navigation terminals.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.5
• /
• pp.379-388
• /
• 2019

Recently, a technique for acquiring spatial information data using UAV (Unmanned Aerial Vehicle) has been greatly developed. It is a very crucial issue of the GIS (Geographic Information System) mapping system that passes way point in the unmanned airframe and finally measures the accurate image and stable localization to the desired destination. Though positioning using DGPS (Differential Global Navigation System) or RTK-GPS (Real Time Kinematic-GPS) guarantee highly accurate, they are more expensive than the construction of a single positioning system using a single GPS. In the case of a low-priced single GPS system, the stability of the positioning data deteriorates. Therefore, it is necessary to supplement the uncertainty of the absolute position data of the UAV and to improve the accuracy of the current position data economically in the operating state of the UAV. The aim of this study was to present an algorithm enhancing the stability of position data in a single GPS mode of UAV with multiple GPS. First, the arrangement of multiple GPS receivers through the center of gravity of the UAV were examined. Next, MD (Mahalanobis Distance) is applied to detect instantaneous errors of GPS data in advance and eliminate outliers to increase the accuracy of previously collected multiple GPS data. Processing procedure for multiple GPS reception data by applying the center of the triangular method were presented to improve the position accuracy. Second, UAV navigation systems integrated multiple GPS through configuration of the UAV specifications were implemented. Using the unmanned airframe equipped with multiple GPS receivers, GPS data is measured with the TCM (Triangular Center Method). In addition, UAV equipped with multiple GPS were operated in study area and locational accuracy of multiple GPS of UAV with VRS (Virtual Reference Station) GNSS surveying were compared. The result showed that the error factors are compensated, and the error range are reduced, resulting in the reliability of the corrected value. In conclusion, the result in this paper is expected to realize high-precision position estimation at low cost in UAV using multiple low-cost GPS receivers.