• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.121-125
• /
• 2013

무배전기식 불꽃 점화 시스템의 스파크 플러그 케이블에서 발생되는 전자파에 대한 분석이다. 무배전기식 불꽃 점화 시스템인 경우에는 점화코일이 고주파 발생원이고 스파크 플러그 케이블과 스파크 플러그는 전자파를 복사하는 안테나로 동작 할 수 있다. 스파크플러그 케이블과 스파크 플러그의 길이를 측정하여 ${\lambda}/4$ 수직 접지 안테나로 동작하는 안테나로 고려하여 HFSS를 이용하여 공진주파수를 계산하였다. 계산된 공진주파수와 엔진룸에서 복사되는 전자파의 전력 스펙트럼 분포를 측정한 결과를 분석하여 무배전기식 불꽂 점화 시스템이 특정한 주파수 대역에서 고주파 에너지를 복사한다는 것을 알 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.2082-2087
• /
• 2004

In this study, the variation of spark plug location in the combustion chamber was investigated for the sake of emission characteristics from SI engine by using PDA valve. The swirl is ong of the important parameters that effects emission characteristics. PDA valve has been used to satisfy the requirements of sufficient swirl generation to improve combustion and emission reduction to effect on flow profile on a combustion chamber. Especially, the variation of spark plug location have an important effect to analyze exhaust gas and the early flame propagative process. Therefore, this test is forced that injection timing, spark timing and intake air motion govern the stable combustion. From the results, it showed that the variable spark plug location and PDA valve can be reduced exhaust gas.

• 조명전기설비학회논문지
• /
• 제18권2호
• /
• pp.36-43
• /
• 2004

본 연구에서는 운전중인 직류전동기의 브러시를 임의로 회전하여 브러시와 정류자편에 불꽃을 발생시켰을 때, 초음파센서와 AE센서를 이용하여 각각의 기계적 노이즈 신호를 검출하였으며, 이를 주파수 스펙트럼으로 분석하였다. 또한 직류전동기의 브러시가 중성축에 정상적으로 위치하여 운전하고 있을 때, 초음파센서와 AE센서를 이용하여 각각의 자기적 노이즈 신호를 검출하였으며, 이를 주파수 스펙트럼으로 분석하였다. 그리고 직류전동기의 브러시를 임의로 회전한 경우의 기계적 노이즈 신호 및 브러시가 중성축에 위치한 경우의 자기적 노이즈 신호를 비교ㆍ분석하였다. 실험 결과, 운전중인 직류전동기의 브러시를 회전방향으로 임의로 회전하여 검출한 초음파의 기계적 노이즈 신호는 브러시가 중성축에 정상적으로 위치하여 검출한 초음파의 자기적 노이즈 신호보다 대략 2.5∼3.0배 증가되었다. 또한 운전중인 직류전동기의 브러시를 회전방향으로 임의로 회전하여 불꽃을 발생시켰을 때, AE의 기계적 노이즈 신호를 검출하여 주파수 스펙트럼으로 분석한 결과 주된 주파수 영역이 대략 1.3[MHz]∼l.5[MHz]인 것으로 나타났다

• Bulletin of the Korean Chemical Society
• /
• 제15권8호
• /
• pp.622-627
• /
• 1994

Conducting solid samples are successfully analyzed with the spark ablation combined to the moderate power (500W) Helium Microwave Induced Plasma (He MIP). The relative standard deviations are in the range of 3-10% and the detection limits are around 50 ${\mu}$g $g^-1$. These values are higher than those of Ar MIP or Ar Inductively Coupled Plasma. Spark ablated particles are examined to investigate the analytical characteristics of the system.

• 전기전자학회논문지
• /
• 제15권4호
• /
• pp.305-312
• /
• 2011

A primary interest of this work is to develop an efficient and powerful repetitive pulser system for the application of ultra wide band generation. The important component of the pulser system is a small-sized coaxial type spark gap with planar electrodes filled with SF6 gas. A repetitive switching action by the coaxial spark gap generates two consecutive pulses in less than a microsecond with rise times of a few hundred picoseconds (ps). A set of several parameters for the repetitive switching of the spark gap is required to be optimized in charging and discharging systems of the pulser. The parameters in the charging system include a circuit scheme, circuit elements, the applied voltage and current ratings from power supplies. The parameters in the discharging system include the spark gap geometry, electrode gap distance, gas type, gas pressure and the load. The characteristics of the spark gap discharge, such as breakdown voltage, output current pulse and recovery rate are too dynamic to control by switching continuously at a high pulse repetition rate (PRR). This leads to a low charging efficiency of the spark gap system. The breakthrough of the low charging efficiency is achieved by a parallel operation of two spark gaps system. The operational behavior of the two spark gaps system is presented in this paper. The work has focused on improvement of the charging efficiency by scaling the PRR of each spark gap in the two spark gaps system.

• 대한기계학회논문집B
• /
• 제30권2호
• /
• pp.170-176
• /
• 2006

A spark discharge aerosol generator using air as a carrier gas has successfully been applied to silver nanoparticle production. The spark discharge between two silver electrodes, which was periodically obtained by discharging the capacitor, produced sufficient high temperatures to evaporate a small fraction of the silver electrodes. The silver vapor was subsequently supersaturated by rapid cooling and condensed to silver nanoparticles by nucleation and condensation. The morphology of the generated particles observed by transmission electron microscope was spherical. The element composition of the nanoparticles was silver, which was determined by energy dispersive X-ray spectroscopy. The crystal phase of the particles spark-generated under air atmosphere was composed of silver and silver oxides phase, which was determined by Xray diffraction analysis. While the nanoparticles generated under nitrogen atmosphere had only silver phase. This XRD data indicates that some fraction of the evaporated silver vapor could be oxidized in air atmosphere by the reaction with oxygen. A stable operation of the spark discharge generator has been achieved. The size and concentration of the particles can be easily controlled by altering the repetition frequency, capacitance, gap distance and flow rate of the spark discharge system.

• 한국공작기계학회논문집
• /
• 제14권4호
• /
• pp.32-40
• /
• 2005

The purpose of this study is to investigate variation of spark plug protrusion and PDA valve on the exhaust emission in a gasoline engine. Swirl is one of the important parameters that affects the characteristics of combustion. PDA valve has been developed to satisfy requirements of sufficient swirl generation for improving the combustion and reducing of emission level. Also, especially, the variation of spark plug protrusion have an important effect to the early flame propagative process. This is largely due to the high flame speed by short of flame propagation distance. So, this is forced that injection timing, spark timing and intake air motion govern the stable combustion. As a result, using two combustion chamber, without charge of engine specification and the variable spark plug location and PDA valve could be reduced exhaust gas at a part load engine conditions(1500rpm imep 3.9bar, 2000rpm imep 3.2bar, 2400rpm imep 3.9bar).

• 한국입자에어로졸학회지
• /
• 제5권3호
• /
• pp.111-122
• /
• 2009

This paper reviews about synthesis of nanoparticles by spark discharge and applications. A method of catalytic activation with Pd and Pt aerosol nanoparticles produced by spark discharge was introduced. After annealing, the catalytically activated substrate placed into a solution for electroless silver deposition. The silver was then formed only on the activated regions of the substrate. Silver line patterns having a width of $18{\mu}m$ and a height of $1{\mu}m$ were created with the ability to be effectively reproduced. Antimicrobial nanoparticles such as silver were used for removal of bioaerosols. Silver nanoparticles deposited air filters such as ACF filters were evaluated by antimicrobial test.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.157-162
• /
• 2015

SKD11(ASTM D2) tool steel is a versatile high-carbon, high-chromium, air-hardening tool steel that is characterized by a relatively high attainable hardness and numerous, large, chromium rich alloy carbide in the microstructure. SKD11 tool steel provides an effective combination of wear resistance and toughness, tool performance, price, and a wide variety of product forms. Adding of CNTs increased the performance of mechanical properties more. 1, 3 vol.% CNTs was dispersed in SKD11 matrix by mechanical alloying. SKD11 carbon nanocomposite powder was sintered by spark plasma sintering process. FE-SEM, HR-TEM and Raman analysis were carried out SKD11 carbon nanocomposites.

• 한국분무공학회지
• /
• 제28권2호
• /
• pp.55-61
• /
• 2023

Natural gas is a high-octane fuel that is effective in controlling knocking combustion. In addition, as a low-carbon fuel with a high hydrogen-carbon ratio, it emits less carbon dioxide and almost no particulate matter compared to conventional fossil fuels. Stoichiometric combustion engines equipped with a three-way catalyst are useful in various fields such as transportation and power generation because of their excellent exhaust emission reduction performance. However, stoichiometric combustion engines have a disadvantage of lower thermal efficiency compared to lean combustion engines. In this study, a combination of high compression ratio and Atkinson cycle was implemented in a 11 liter, 6-cylinder, spark-ignition engine to improve the thermal efficiency of the stoichiometric engine. As a result, pumping and friction losses were reduced and the operating range was extended with optimized Atkinson camshaft. Based on the exhaust gas limit temperature of 730℃, the maximum load and thermal efficiency were improved to BMEP 0.66 MPa and BTE 35.7% respectively.