• Journal of Energy Engineering
• /
• v.2 no.3
• /
• pp.251-257
• /
• 1993

The purpose of this study is to obtain an improved interpretation of heat transfer phenomena between blocks and fluids in the parallel conducting plates. Flow is two-dimensional, incompressible steady laminar flow over rectangular blocks, representing finite heat source on parallel plate. Heat transfer phenomena, temperature of blocks and heat transfer into the flow field are investigated for different spacings between blocks and Reynolds numbers. Results indicate that Nusselt number on the far upstream corner of the block was higher than that of any part of the block. As Reynolds number and spacings of blocks increased, Nusselt number increased. The distribution of local Nusselt number on the top surface of the conducting plate is similar to the case with insulated plate. Temperature of the block which has heat source in half cubage was approximately twice as high as temperature of the block which has heat source in whole cubage. As Reynolds number and spacings of blocks increased, overall temperature decreased. The peak value of block temperature occurred at position shifted to the right or upper right from center. The maximum temperature of block can be expressed as a function of Reynolds number, spacings between blocks, position of maximum temperature of each block and then it is possible to predict the maximum temperature of blocks.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.8 no.1
• /
• pp.69-81
• /
• 1970

1. Four soybean varieties in pure stand and mixtures were grown in 20 competition treatments of genotypes at within-row spacings of 5, 10, 20, 40, and 80 cm and were investigated in 10 characters for different genotypes. 2. Yield, weight of 100 seeds, height, number of branches, pods per plant, and seeds per pod were highly significant for within-row spacing treatment. 3. There was no spacing treatment effect for number of nodes and days to flower. Maturity did not respond equally in four varieties for spacing effect. 4. Fruiting period was influenced by spacing treatment. Height and number of branches were increased as within-row spacings were increased. Seed yield per area was increased oppositely. 5. Difference between fertilizing and non-fertilizing treatment was not significant in this experiment. At 80 cm spacing no competition effect occurred for yield. 6. In the competition effect, Kumkang Daerip was strong competitor ani Chungbuck Back and Shelby were weak competitors. 7. The within-row spacing of uniformity in roder to increase yield per area was proved as 20 cm in this study. 8. Oil percent was increased as spacings were increased and protein percent was as spacings were decreased.

• The Korean Journal of Applied Statistics
• /
• v.21 no.2
• /
• pp.265-273
• /
• 2008

Kim (2001a) presented a modification of the Shapiro and Wilk (1972) test for exponentiality based on the ratio of two asymptotically efficient estimates of scale. In this paper we modify this test statistic when the sample is censored. We use the normalized spacings based on the sample data, which was used in Samanta and Schwarz (1988) to modify the Shapiro and Wilk (1972) statistic to the censored data. As a result the modified statistics have the same null distribution as the uncensored case with a corresponding reduction in sample size. Through a simulation study it is found that the proposed statistic has higher power than Samanta and Schwarz (1988) statistic especially for the alternatives with the coefficient of variation greater than or equal to 1.

• The Korean Journal of Applied Statistics
• /
• v.23 no.3
• /
• pp.487-495
• /
• 2010

This paper develops a goodness of fit test statistic to test if the progressively Type II censored sample comes from an exponential distribution with origin known. The test is based on normalizing spacings and Stephens (1978)' modified Shapiro and Wilk (1972) test for exponentiality. The modification is for the case where the origin is known. We applied the same modification to Kim (2001a)'s statistic, which is based on the ratio of two asymptotically efficient estimates of scale. The simulation results show that Kim (2001a)'s statistic has higher power than Stephens' modified Shapiro and Wilk statistic for almost all cases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.4
• /
• pp.765-774
• /
• 1992

The effect of the interactive flow on convective heat transfer from two vertical isothermal parallel plates have been studied numerically by the finite difference method. The Reynolds number, Grashof number, the relative length, L$_{2}$/L$_{1}$, and the dimensionless plate spacing, b/L$_{1}$ are varied as parameters. In case of outside mean Nusselt number, left outside mean Nusselt numbers show same values as L$_{2}$/L$_{1}$ and b/L$_{1}$ increase, but right outside mean Nusselt numbers decrease as L$_{2}$/L$_{1}$ increases. The inside mean Nusselt numbers are constant at narrow spacings and increase at wide spacings as Grashof numbers increase. The optimun plate spacing on left inside mean Nusselt numbers is b/L$_{1}$=0.4 at Re=100 and b/L$_{1}$=0.3 at Re=200. For the right inside mean Nusselt number, the optimum plate spacings move to the narrow spacing as Reynolds numbers increase and L$_{2}$/L$_{1}$ decrease.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.11
• /
• pp.1555-1563
• /
• 1998

Heat transfer and pressure drop for ${\phi}10.07$ dry surface fin-tube heat exchanger with wave and wave-slit fins were measured for different fin spacings and number of tube rows. Longitudinal and transverse tube spacings of the heat exchangers are 21.65mm and 25mm respectively, and wave depth of wave fin is 1.5mm. The experiments were performed for 4 different fin spacings, 1.3, 1.5, 1.7 and 2.0mm, and the number of tube rows were 1,2 and 3 rows. The present results were compared with the previous results for the wave depth of 2mm. Also hydrophilic coated and bare fins were tested. Correlations for Colburn j-factor and friction factor were developed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.5
• /
• pp.589-599
• /
• 1998

Air side heat transfer and pressure drop for fin-tube heat exchanger with wave and wave-slit fins were measured for various fin spacings and number of tube rows. Outer diameter of the tube including fin collar is 10.07mm, and experiments were done with dry surface condition. Longitudinal and transverse tube spacings of the heat exchangers are 21.65mm and 25mm respectively, and wave depth of the wave fin is 2mm. Experiments were conducted for 1, 2 and 3 rows and 3 different fin spacings, 1.3, 1.5 and 1.7mm. An attempt was made to demonstrate advantage of the enhanced fins over the plane fin by introducing the concept of fan power, Effect of the number of tube rows on heat transfer was discussed in connection with general mechanisms of heat transfer enhancement for fin-tube heat exchanger. Also the effect of hydrophilic coating was investigated. Lastly, correlations for Colburn j-factor and friction factor were developed.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.68-74
• /
• 1993

The mixed convection heat transfer has been studied numerically for misaligned and parrallel arrays of two flat plates at 100.leg.Re.leg.700, 0.1.leg.B.leg.1.0, 0.2.leg.leg.PHI.$_{R}$.leg.1Gr=10$^{4}$ and Pr=0.71. For misaligned plates and parallel plates, the optimum plate spacings move to the narrow spacing as Reynolds number and .PHI.$_{R}$ increase and can be expressed by the correlation equations at Gr=10$^{4}$. The optimum plate spacings for parallel plates sharply move to the narrow spacing compared with misaligned plates. The maximum mean Nusselt number of parallel plates shows higher value than that of misaligned plates and can be expressed by the correlation equations at Gr=10$^{4}$.EX>.

• Communications for Statistical Applications and Methods
• /
• v.24 no.3
• /
• pp.193-209
• /
• 2017

The power Lindley distribution with some of its properties is considered in this article. Maximum likelihood, least squares, maximum product spacings, and Bayes estimators are proposed to estimate all the unknown parameters of the power Lindley distribution. Lindley's approximation and Markov chain Monte Carlo techniques are utilized for Bayesian calculations since posterior distribution cannot be reduced to standard distribution. The performances of the proposed estimators are compared based on simulated samples. The waiting times of research articles to be accepted in statistical journals are fitted to the power Lindley distribution with other competing distributions. Chi-square statistic, Kolmogorov-Smirnov statistic, Akaike information criterion and Bayesian information criterion are used to access goodness-of-fit. It was found that the power Lindley distribution gives a better fit for the data than other distributions.

• Journal of the Korean Society of Combustion
• /
• v.4 no.1
• /
• pp.17-26
• /
• 1999

Vaporization, ignition and combustion of fuel droplets in tandem array are theoretically investigated to understand the droplet interactions in combustors. Including the effects of density variation in gas-phase, internal circulation and transient liquid heating, a numerical studies are performed by changing parameters such as initial droplet temperatures, initial droplet spacings, initial Reynolds numbers, surrounding gas temperatures, and activation energies of fuel vapors. Combustion regime maps classify the droplet combustion phenomena according to the configuration and location of the flame with respect to injection Reynolds numbers and surrounding gas temperatures. In addition, it is shown that the dynamic histories of droplets and ignition delay times are dependent on droplet size ratios and initial spacings of tandem droplets.