• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.425-430
• /
• 1998

This paper presents a high performance low switching PWM technique for the propulsion system of railway such as subway and high speed train. In order to achieve the continuous voltage control to six-step and a low harmonics with low switching frequency under 500Hz, the synchronous PWM technique is combined with a space vector overmodulation and implemented by using DSP. Improved performance and a validation of proposed method are showed by the digital simulation and the experimental results using a 1.65MVA IGBT VVVF inverter and inertia load equivalent to 160 tons railway vehicles.

• 한국경영과학회지
• /
• 제19권1호
• /
• pp.153-168
• /
• 1994

This paper is concerned with the development of tree-search algorithm for the exact solution to the vehicle problem (VRP), where set of vehicles of known capacity based at depot, have to be routed in order to supply customers with known requirements. When is required is to design routes, so that the total cost (i. e. total route length or time duration, ect.) is minimized. For obtianing the exact solution, the most important factors are the value of bound and branching strategy. Using the bound based on with bound ascent procedures from subgradient and state-space ascents, the incorporation of bounds into tree search algorithm to solve the problem is shown. Computational results of the corresponding algorithm show that VRPs with up to 40 customers can be solved optimally with this algorithm.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 춘계학술강연 및 발표대회
• /
• pp.7-7
• /
• 2002

Recently social demand to achieve low fuel consumption and clean emission requires the development of new generation vehicle beyond the conventional vehicle concept. In this point, new generation vehicle is newly designed as electric vehicle, hybrid electric vehicle, fuel cell electric vehicle or 3 liter car etc. In order to develop new generation vehicle, it is very important to develop new materials and process technologies now. In this paper these new technologies are presented focusing on weight reduction specially. Steel body can be achieved 20-25% weight reduction by adoption of high strength steel and new process technologies, i.e tailored blank and hydroforming. Aluminium body can be achieved 40-50% weigt down by use of all aluminium monocoque body or aluminium space frame with aluminium panel. Plasitic composite body can be achieved 30% weight reduction comparing with conventional steel body.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집B
• /
• pp.198-203
• /
• 2001

This paper discusses an experimental method for measuring the insertion loss (IL) performance of a double panel that are used in vehicles. Instead of two adjacent reverberation chambers which are generally used to measure the transmission loss (TL) of the large sound isolation materials, air-borne sound insulation tester was utilized to determine the IL and articulation index (AI) of standardized deadening materials. In comparison to reverberation chamber method, air-borne sound insulation tester method is more space-saving, more time-saving and more simple to the automotive acoustics. From the empirical results, it is verified that the performance of deadening materials is closely connected with thickness of panels, type of filling material that is filled into a double panel, and area ratio of double panel.

• 대한안전경영과학회지
• /
• 제12권3호
• /
• pp.315-320
• /
• 2010

Recently, there are environmental issues for sustainable transportation system to pursue the energy-efficient and environment-friendly public urban transit. These transportation system needs to offer demand-oriented high-quality service being on the same level with cab service for urban space. PRT(Personal Rapid Transit), small track-guided vehicle, is repeatedly mentioned as a possible alternative for the new urban public transportion system, but but there are not many researches on the operational optimal routing for PRT network. In this paper, the concept of PRT and general optimal routing methods are reviewed. And we suggest the optimal routing method for city-wide PRT network with multi-vehicles and stations, junctions and directional arcs. Futher research directions for PRT routing are presented.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.47-53
• /
• 2017

우주 발사체의 발사 실패 원인 중 가장 대표적인 것이 연소불안정 현상이다. 연소불안정은 연소실 내부의 압력 섭동과 열방출 섭동의 상호작용으로 인하여 연소실 내부의 압력 섭동이 크게 증폭되는 현상을 말하며, 이러한 현상이 심해지게 되면, 엔진의 폭발 또는 비행체의 추락 등이 일어나게 된다. 이러한 연소불안정 현상을 예측하고 회피하기 위해서는 현상의 이해가 반드시 필요하며, 이를 위해 국내외적으로 연소불안정에 대해 수치적, 이론적, 실험적인 접근을 통한 연구가 많이 진행되고 있다.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.1911-1915
• /
• 2009

The problem of determining the proper capacity of electric vehicle charging station is studied in the presented paper. Based on the expected arrival rate and the expected charging time, we calculate the proper capacity that guarantees electric vehicles get service better than a given lower bound which is termed the loss of charging probability. The problem is studied by using certain queueing models. We first formulate the problem as a queueless model of type M/M/n/n, known as the Erlang loss system. And then the M/M/n/K type queueing model is formulated to consider the parking space constraint. Results of the study may be used for designing the electric vehicle charging station.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1994년도 추계학술발표회 초록집
• /
• pp.14-16
• /
• 1994

The development of proton exchange membrane fuel cells(PEMFCs) with high energy efficiencies and high power densities is gaining momentum because their performance characteristics are attractive for terrestrial(power sources for electrical vehicles, stand-by power), space and underwater application[1]. Fuel cells are capable of running on non-petroleum fuels such as methanol, natural gas or hydrogen and also have major impact on improving air quality. They virtually eliminate particulates, NO$_{x}$, SO$_{x}$, and significant reduce hydrocarbons and carbon monoxide. Especially, fuel cell-battery hybrid power sources appear to be well suited to overcome both the so-called battery problem(low energy density) and the fuel cell problem(low power density)[2].[2].

• 위성통신과 우주산업
• /
• 제14권1호통권29호
• /
• pp.102-109
• /
• 2007

본 논문은 고속열차와 같은 고속 이동체에서 위성무선연동 전송기술을 이용하여 지상무선망과 동일한 수준의 인터넷 서비스를 제공하기 위한 이동형 위성 인터넷 접속기술에 관한 것이다. 이러한 서비스 제공을 위해서는 터널이나 역사(Railway Station)와 같은 N-LOS 환경에 대한 대처기술이 필요하며, LOS 환경에서도 철로상에 설치되어 있는 Electronic Power Post나 Power Bridge 등으로 인한 주기적이고 짧은 시간동안의 신호열화 현상이나 고속 이동에 따른 도플러 현상에 대한 극복기술이 필요하다. 이러한 기술들이 집약된 본 시스템을 소개한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.172-175
• /
• 2005

Since, similar to other commercial launch vehicles, various kinds of pyrotechnique devices are used in the KSLV-I(Korea Space Launch Vehicle), the electronic equipment on the vehicle equipment bay is exposed to the sever pyroshock environment during Pyrotechnique device detonation. In order to confirm the survivability of electrical instruments from these pyroshock conditions, shock tests are performed by using a pyroshock simulation during development and qualification phase. In this paper, the pyroshock simulator installed in KARI(Korea Aerospace Research Institute) are briefly introduced, and its performance of pyroshock generating is compared with the measured shock response spectrums from small scaled fairing jettisoning tests. The results show that the pyroshock simulator is still proper to generate severe pyroshocks similar to real pyrotechique detonating conditions, but the redesign on the test jigs is necessary to improve its test performance.