• Honam Mathematical Journal
• /
• v.36 no.4
• /
• pp.777-786
• /
• 2014

We construct an orthonormal basis for the Bergman space associated to a simply connected domain. We use the or-thonormal basis for the Hardy space consisting of the Szegő kernel and the Riemann mapping function and rewrite their area integrals in terms of arc length integrals using the complex Green's identity. And we make a note about the matrix of a Toeplitz operator with respect to the orthonormal basis constructed in the paper.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2446-2462
• /
• 2016

In this paper, a frequency domain Expectation-Maximization (EM)-based channel estimation algorithm for Space Time Block Coded-Orthogonal Frequency Division Multiplexing (STBC-OFDM) systems is investigated to support higher data rate applications in wireless communications. The computational complexity of the frequency domain EM-based channel estimation is increased when higher order constellations are used because of the ascending size of the search set space. Thus, a search set reduction algorithm is proposed to decrease the complexity without sacrificing the system performance. The performance results of the proposed algorithm is obtained in terms of Bit Error Rate (BER) and Mean Square Error (MSE) for 16QAM and 64QAM modulation schemes.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.65 no.4
• /
• pp.316-320
• /
• 2016

This paper proposes an alternate time-switched multiplexed space-frequency block coding technique for single-carrier modulation with frequency domain equalization. The traditional multiplexed space-frequency block coding technique for single-carrier modulation uses multiple groups of two transmitters and suppresses the interference signals of other SFBC groups at the receiver. In this paper, we reconfigure transmit signals to adapt them for alternate time-switched multiplexed SFBC for single-carrier modulation with frequency domain equalization and receiver structures and propose a structure for transmitter and receiver, show that its performance is better than the traditional algorithm by simulations.

• Journal of the Korean Mathematical Society
• /
• v.57 no.6
• /
• pp.1435-1449
• /
• 2020

In this article we make a local classification of n-dimensional Riemannian manifolds (M, g) with harmonic curvature and less than four Ricci eigenvalues which admit a smooth non constant solution f to the following equation $$(1)\hspace{20}{\nabla}df=f(r-{\frac{R}{n-1}}g)+x{\cdot} r+y(R)g,$$ where ∇ is the Levi-Civita connection of g, r is the Ricci tensor of g, x is a constant and y(R) a function of the scalar curvature R. Indeed, we showed that, in a neighborhood V of each point in some open dense subset of M, either (i) or (ii) below holds; (i) (V, g, f + x) is a static space and isometric to a domain in the Riemannian product of an Einstein manifold N and a static space (W, gW, f + x), where gW is a warped product metric of an interval and an Einstein manifold. (ii) (V, g) is isometric to a domain in the warped product of an interval and an Einstein manifold. For the proof we use eigenvalue analysis based on the Codazzi tensor properties of the Ricci tensor.

• Kyungpook Mathematical Journal
• /
• v.58 no.2
• /
• pp.271-289
• /
• 2018

Let 0 < q < ${\infty}$. In this study, we introduce the spaces ${\mathcal{BV}}_q$ and ${\mathcal{LS}}_q$ of q-bounded variation double sequences and q-summable double series as the domain of four-dimensional backward difference matrix ${\Delta}$ and summation matrix S in the space ${\mathcal{L}}_q$ of absolutely q-summable double sequences, respectively. Also, we determine their ${\alpha}$- and ${\beta}-duals$ and give the characterizations of some classes of four-dimensional matrix transformations in the case 0 < q ${\leq}$ 1.

• Smart Structures and Systems
• /
• v.8 no.2
• /
• pp.157-172
• /
• 2011

A new method for both local damage(s) identification and input excitation force identification of beam structures is presented using the dynamic response sensitivity-based finite element model updating method. The state-space approach is used to calculate both the structural dynamic responses and the responses sensitivities with respect to structural physical parameters such as elemental flexural rigidity and with respect to the force parameters as well. The sensitivities of displacement and acceleration responses with respect to structural physical parameters are calculated in time domain and compared to those by using Newmark method in the forward analysis. In the inverse analysis, both the input excitation force and the local damage are identified from only several acceleration measurements. Local damages and the input excitation force are identified in a gradient-based model updating method based on dynamic response sensitivity. Both computation simulations and the laboratory work illustrate the effectiveness and robustness of the proposed method.

• Korean Institute of Interior Design Journal
• /
• v.22 no.5
• /
• pp.328-335
• /
• 2013

This study investigated the ratios of area, according to the domains and functions, of a public library. To this end, 20 public libraries were selected as samples from the 2012 Public Library Construction Casebook and from cases of consulting on the construction and operation of public libraries. The domains of a public library were categorized into data reading, cultural education, operation, common use, and others. There was a large difference in the area ratios between public libraries that were built with the aid of consulting (Group B) and those without consulting (Group A). In functional terms, the data(bookshelf) space and reading space had similar ratios within a data reading room, while the ratio of the library information space was smaller. Within a general data reading room, the ratio of the library information space was 12%, while the ratios of the data space and seating space were 44%, respectively. Moreover, within a data reading room for children, the ratios of the library information space and children's space were adjusted to 14%, respectively, while the data space and seating space each accounted for 36%, with either 3- or 5-decker bookshelves installed. This study has identified how to calculate the area for each domain, capacity of books, and seating capacity by applying area ratios through functions in the data storage domain, along with numbers of books and seats per unit space. This study has also succeeded in calculating the required area and seats for each type of data storage room by applying the number of books that exist. However, this study has its limitation in that the regional characteristics(Metropolis, Small & medium size cities, Rural areas) were not considered because the number of samples was only 20 libraries.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.2
• /
• pp.85-93
• /
• 2024

In this paper, we propose a method for establishing a state-space equation model for the motion analysis of floating structures subjected to wave loads, by applying system-identification techniques. Traditionally, the motion of floating structures has been analyzed in the time domain by integrating the Cummins equation over time, which utilizes a convolution integral term to account for the effects of the retardation function. State-space equation models have been studied as a way to efficiently solve floating-motion equations in the time domain. The proposed approach outlines a procedure to derive the target transfer function for the load-displacement input/output relationship in the frequency domain and subsequently determine the state-space equation that closely approximates it. To obtain the state-space equation, the method employs the N4SID system-identification method and an optimization approach that treats the coefficients of the numerator and denominator polynomials as design variables. To illustrate the effectiveness of the proposed method, we applied it to the analysis of a single-degree-of-freedom model and the motion of a six-degree-of-freedom barge. Our findings demonstrate that the presented state-space equation model aligns well with the existing analysis results in both the frequency and time domains. Notably, the method ensures computational accuracy in the time-domain analysis while significantly reducing the calculation time.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.754-760
• /
• 2012

To improve the efficiency and economics of national defence, the needs for defence M&S systems are greatly increased, but the lack of interoperability and reusability lowers the level of reliability in the existing simulations models. Recently, many research activities have been performed and some conceptual models, such as CMMS, DCMF, and KAMA, were introduced. However, these models don't support the whole process of defence M&S system development nor provide integrated domain knowledge and up-to-date data. In this paper, we analyzed the analysts' guidances and doctrines, which are the basic ingredients for the simulation system development, and proposed a systematic structure for all the defence M&S stakeholders to share the standardized domain knowledge, modeling algorithm and data. This will be a logical bridge between Mission Space and Simulation Space, and provide substantial data sets to build simulation systems.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.2
• /
• pp.97-103
• /
• 2019

An automated signal-acquisition method for the NASA's space geodesy satellite laser ranging (SGSLR) system is described as a selection of two system parameters with specified probabilities. These parameters are the correlation parameter: the minimum received pulse number for a signal-acquisition and the frame time: the minimum time for the correlation parameter. The probabilities specified are the signal-detection and false-acquisition probabilities to distinguish signals from background noise. The steps of parameter selection are finding the minimum set of values by fitting a curve and performing a graph-domain approximation. However, this selection method is inefficient, not only because of repetition of the entire process if any performance values change, such as the signal and noise count rate, but also because this method is dependent upon system specifications and environmental conditions. Moreover, computation is complicated and graph-domain approximation can introduce inaccuracy. In this study, a new method is proposed to select the parameters via a conditional equation derived from characteristics of the signal-detection and false-acquisition probabilities. The results show that this method yields better efficiency and robustness against changing performance values with simplicity and accuracy and can be easily applied to other satellite laser ranging (SLR) systems.