• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.600-609
• /
• 2017

We designed a target management integration system that enables us to select the final target manually or automatically from seeker's sensor image. The integrated system was developed separately for the air vehicle system and the ground system. The air vehicle system simulates the motion dynamics and the sensor image of the air vehicle, and the ground system is composed of the target template image module and the ground control center module. The flight maneuver of the air vehicle is based on pseudo 6-degree of freedom motion equation and the proportional navigation guidance. The sensor image module was developed using the known infrared(IR) image rendering method, and was verified by comparing the rendered image to that of a commercial software. The ground control center module includes an user interface that can display as much information to meet user needs. Finally, we verified the integrated system with simulated impact target mission of the air vehicle, by confirming the final target change and the shot down result of the user's intervention.

• Journal of Korean Society of Transportation
• /
• v.20 no.5
• /
• pp.67-79
• /
• 2002

In this paper, observed trajectories of a vehicle platoon are viewed as one realization of a finite sequence of random trajectories. In this point of view, we develop novel and mathematically rigorous concept of traffic flow variables such as local traffic density, instantaneous traffic flow, and velocity field and investigate their nature on a general probability space of a sequence of random trajectories which represent vehicle trajectories. We present a simple model of random trajectories as an illustrative example and, derive the values of traffic flow variables based on the new definitions in this model. In particular, we construct the model for the sequence of random vehicle trajectories with a system of stochastic differential equations. Each equation of the system nay represent microscopic random maneuvering behavior of each vehicle with properly designed drift coefficient functions and diffusion coefficient functions. The system of stochastic differential equations nay generate a well-defined probability space of a sequence of random vehicle trajectories. We derive the partial differential equation for the expected cumulative plot with appropriate initial conditions. By solving the equation with numerical methods, we obtain the values of expected cumulative plot, local traffic density, and instantaneous traffic flow. In addition, we derive the partial differential equation for the expected travel time to a certain location with appropriate initial and/or boundary conditions, which is solvable numerically. We apply this model to a case of single vehicle trajectory.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.28 no.8
• /
• pp.544-549
• /
• 2015

Since LEDs (light emitting diodes) have many advantages as a light source in vehicle headlamp, such as good reliability, energy and space saving, and flexible headlamp design. On the other hand, the dependence of its performance and life on temperature have great influence on its practical use. In this study, design and fabrication of heat sink for vehicle LED headlamp were performed using thermally-conductive plastics. This study focused on the effective heat sink structure with limited space in the vehicle LED headlamp. We designed two different prototype of heat sink by thermal simulation using SolidWorks program, which had excellent temperature characteristics. The two different prototype of heat sink were fabricated by injection molding with thermally-conductive plastics. The results showed that LED $T_j$ (junction temperature) of sample B (model 1) and sample C (model 1, 2) was below then $165^{\circ}C$ when applying the thermally-conductive plastics in heat sink of vehicle LED headlamp.

• Journal of computational fluids engineering
• /
• v.19 no.2
• /
• pp.86-92
• /
• 2014

In this paper, prediction of separation trajectory for Two-stage-To-Orbit space launch vehicle has been numerically simulated by using an aerodynamic database based on steady state analysis. Aerodynamic database were obtained for matrix of longitudinal and vertical positions. The steady flow simulations around the launch vehicle have been made by using a 3-D RANS flow solver based on unstructured meshes. For this purpose, a vertex-centered finite-volume method was adopted to discretize inviscid and viscous fluxes. Roe's finite difference splitting was utilized to discretize the inviscid fluxes, and the viscous fluxes were computed based on central differencing. To validate this flow solver, calculations were made for the wind-tunnel experiment model of the LGBB TSTO vehicle configuration on steady state conditions. Aerodynamic database was constructed by using flow simulations based on test matrix from the wind-tunnel experiment. ANN(Artificial Neural Network) was applied to construct interpolation function among aerodynamic variables. Separation trajectory for TSTO launch vehicle was predicted from 6-DOF equation of motion based on the interpolated function. The result of present separation trajectory calculation was compared with the trajectory using experimental database. The predicted results for the separation trajectory shows fair agreement with reference[4] solution.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.3
• /
• pp.247-255
• /
• 2013

The flight control of re-entry vehicles poses a challenge to conventional gain-scheduled flight controllers due to the widely spread aerodynamic coefficients. In addition, a wide range of uncertainties in disturbances must be accommodated by the control system. This paper presents the design of a roll channel controller for a non-axisymmetric reentry vehicle model using the trajectory linearization control (TLC) method. The dynamic equations of a moving mass system and roll control model are established using the Lagrange method. Nonlinear tracking and decoupling control by trajectory linearization can be viewed as the ideal gain-scheduling controller designed at every point along the flight trajectory. It provides robust stability and performance at all stages of the flight without adjusting controller gains. It is this "plug-and-play" feature that is highly preferred for developing, testing and routine operating of the re-entry vehicles. Although the controller is designed only for nominal aerodynamic coefficients, excellent performance is verified by simulation for wind disturbances and variations from -30% to +30% of the aerodynamic coefficients.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.9
• /
• pp.723-734
• /
• 2018

A structural weight estimation methodology for the multicopter design process is presented. In general, a multicopter is composed of an airframe, motors, propellers, battery and so on. Among these, the weight of motors, propellers and battery can be obtained from the weight trends with respect to design parameters. However, the structural weight is hard to be estimated due to the various configurations and design concepts of multicopters. Moreover, the airframe weights of most commercial multicopter products are not provided. Thus, an accurate airframe weight model is required for the reliable mutlcopter design process. Firstly, the standard configuration of multicopters is defined. Then, we proposed the structural weight estimation method using the number and diameter of propellers determined from the initial step of sizing process. Finally, we validated our suggested method using the commerical products.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.1
• /
• pp.41-52
• /
• 2021

During atmospheric ascent of a launch vehicle, airborne acoustic loads act on the vehicle and its effect becomes pronounced at transonic speed. In the present study, acoustic loads acting on a hammerhead launch vehicle at a transonic speed have been analyzed using ��-ω SST based IDDES and the results including mean Cp, Cprms, and PSD are compared to available wind-tunnel test data. Mesh dependency of IDDES results has been investigated and it has been concluded that with an appropriate turbulence scale-resolving computational mesh, the characteristic flow features around a transonic hammerhead launch vehicle such as separated shear flow at fairing shoulder and its reattachment on rear body as well as large pressure fluctuation in the region of separated flow behind the boat-tail can be predicted with reasonable accuracy for engineering purposes.

• Journal of Advanced Navigation Technology
• /
• v.28 no.3
• /
• pp.278-287
• /
• 2024

In this paper, telemetry link budget model for small launch vehicle is proposed, and telemetry link budget simulator is implemented. The proposed link budget model consist of geometry model and propagation loss model. The geometry model is calculation of look angle between ground station and small launch vehicle. The propagation loss model consist of free space loss, polarization loss, and de-pointing loss which are appropriate to the small launch vehicle flight environment. The proposed propagation loss model can be calculate propagation loss without complex calculation of propagation environments. The link budget simulator is implemented in MATLAB. The simulator calculate look angle, free space loss, polarization loss parameter, de-pointing loss and received signal level in ground station by using position of ground station, routing of small launch vehicle, 3-D radiation patterns of antennas.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.4
• /
• pp.364-374
• /
• 2012

The purpose of this study is to perform the reliability-corrected development cost estimation of the launch vehicle at the conceptual design phase. In order to estimate the launch vehicle development cost, the estimation method based on the independent variable such as the rocket performance and dry mass has been mainly implemented up to now. This approach has made the approximate cost estimation possible, however, the cost variation according to the reliability requirement could not be reflected. In this paper, the cost estimation methodology that introduces the reliability factor in addition to the performance and mass in the TRANSCOST model is presented in order to improve the limitation of current cost estimation method. The development cost of KSLV(Korea Space Launch Vehicle)-II is estimated on the basis of this newly implemented concept with reliability as an added parameter.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.1-11
• /
• 2018

A system design and integrated design process for a space launch vehicle were established based on system engineering. With the mission design results for a given payload weight and trajectory, it is possible to perform optimal design by integrating each unit such as propulsion, weight estimation, and aerodynamic force after analysis, during in the system design process. The program is finally configured to verify that the designed vehicle can perform its mission through 3-DOF trajectory optimization simulation. Genetic algorithms are used as the optimization method, and the optimal design results of the variables and parameters to be considered during design are presented.