• Journal of Aerospace System Engineering
• /
• v.11 no.3
• /
• pp.16-21
• /
• 2017

In this paper, we propose a new folding method (the blossom method) to increase storage efficiency of drag-sail. To resolve the issue caused by increase in the thickness of the sail, we allowed margin space (offset) along the folding line and made holes at the intersection of offset lines to prevent distortion of film. In addition, to verify applicability of the blossom method, we fabricated quarter of the sail by using Mylar film and conducted a deployment experiment. If the blossom method is applied, storage ratio (storage volume: deployed area) is 1: 68.64, that is approximately 1.88 times more than the z-fold method of folding sailing.

• Microbiology and Biotechnology Letters
• /
• v.43 no.3
• /
• pp.177-186
• /
• 2015

With a view to supporting the provisions of the current Korean food code for the detection of Benzo[a]pyrene, various analytical methods of detection in foods were evaluated and established in terms of linearity, limits of detection/quantitation, efficiency, and accuracy, amongst others. It was observed that to improve the technologies involved in the application of these methods, complicated and combined preparation processes of foods, including extraction, separation and purification, have been the main focus of efforts at optimization. Recently, on-site quick reaction for the detection of hazardous substances in the environment and food materials aims at developing simplified examination processes, such as lable-free and non-invasive technological analysis, to reduce the costs and time involved in the examination. Herein, current benzo[a]pyrene detection methods are reviewed in addition to new Raman spectroscopy-based trials established to pursue improve the speed, simplicity and suitability of testing.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.1
• /
• pp.9-16
• /
• 1995

The erection process planning is to decide erection strategy and sequence that satisfies dock duration. The erection scheduling is to decide erection date of each block. The load profile varies according to scheduling and it is related to building cost. It must be possible to simulate the various combinations of process plan and schedule for optimal planning. To develop the process planning system for optimal planning, the system that generate the sequence of erection automatically and the load leveling system are required. This paper suggests the method that generates the erection sequence. The load leveling should be done to all the ships in the same dock batch to get reliable results. In this case since the search space is very large, efficient optimization method is needed Our research achieved the load leveling system using Genetic Algorithm. This system made it possible to simulate various process plans to which schedule is considered.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.5
• /
• pp.37-48
• /
• 2004

This study is focused on the constitutive model in order to represent brittleness and dilatancy for cohesionless soils. The constitutive model was based on an anisotropic hardening rule derived from generalized isotropic hardening nile, which includes an appropriate hardening equation for the overall strain behavior at small to large strains. The yield surface is a simple cylinder type in stress space and it makes the model practically useful. Hence dilatancy behavior in cohesionless soils could be modeled reasonably. A peak stress ratio was defined in order to model brittle stress-strain relationships. An optimized design methodology was proposed on the basis of real-coded genetic algorithm in order to determine parameters for the proposed model systematically. The material parameters were then determined by that algorithm. In order to verify the proposed model, triaxial tests were performed under $K_0$ conditions far weathered soils. In comparison with the triaxial test results under $K_0$ conditions, the proposed model could calculate appropriately the actual effective stress behavior on brittle stress-strain relationships and dilatancy.

• Journal of Biosystems Engineering
• /
• v.41 no.1
• /
• pp.21-33
• /
• 2016

Purpose: In order to ensure that vegetable seedlings (with a soil block around their roots) are planted in an upright orientation after metering in a vegetable transplanter, they need to be dropped freely from a certain height. The walk-behind hand-tractor-powered machines do not have sufficient space to drop the seedlings from that height. In the present work, a hopper-type planting device was developed for the walk-behind hand-tractor-powered vegetable transplanter to ensure that the soil block seedlings are planted in an upright orientation. Methods: Various dimensionless terms were developed based on the dimensional analysis approach, and their effect on the planting of soil block seedlings in an upright orientation (planting efficiency) was studied. The optimum design dimensions of the hopper-type planting device were identified by the Taguchi method of optimization. Results: The ratio of the height of free fall to the sliding distance of the seedling on the surface of the hopper had the highest influence on planting efficiency. The planting efficiency was highest for plants with a height $15{\pm}2cm$. The plant handling Froude number, in interaction with the design of the hopper-type planting device, also significantly affected the planting efficiency. Of the hopper design factors, the length of the slide of the seedlings on the surface of the hopper was most important, and induced sufficient velocity and rotation to cause the seedling to fall in an upright orientation. An evaluation of the performance of the planting device under actual field conditions revealed that the planting efficiency of the developed planting device was more than 97.5%. Conclusions: As the seedlings were fed to the metering device manually, an increase in planting rate increased missed plantings. The planting device can be adopted for any vegetable transplanter in which the seedlings are allowed to drop freely from the metering device.

• Fire Science and Engineering
• /
• v.16 no.2
• /
• pp.43-50
• /
• 2002

21C, Multiplex Cinema Theater is made from movie industry developed and become a place where we can spend our free time and consuming. But, theater users, who are many and unspecified persons, are short of information on the Multiplex Cinema Theater, so that they may be injured or killed at the occurrence of fire accident. Particularly, Multiplex Cinema Theater is a place that underground space or top floor in highrise building had many people in theaters. However, this problem is difficult to solve that to protect human being and properties at the occurrence of fire accident in the Multiplex Cinema Theater, In order to overcome such problems, Multiplex Cinema Theater need fire protection solutions facilities concerning particulars to pay attention to the safety on a fire and evacuation. This study analysed Multiplex Cinema Theater concept and computer simulation for risk point.

• The KIPS Transactions:PartB
• /
• v.11B no.1
• /
• pp.63-70
• /
• 2004

Port operation is largely divided into gate operation, yard operation and berth operation. Operation strategy and optimal resource allocation for three parts are important in the productivity of the port operation.. Especially the resource allocation planning in berth operation needs optimization, because it is directly connected with the processing time in shipping. Berth planning is not independent on recourse allocation but interrelated with yard stacking area allocation. Therefore, we design the optimized module of berth planning and give priority to interrelationship with yard space allocation, while existing studies design independent resource allocation in berth planning. We suggest constraints by mathematical method, and they are related to yard stacking area allocation with existing constraints. Then we look for solutions, use tabu search to optimize them, and design optimized the berth planning module. In the performance test of optimized module design of berth planning, we find that the berth planning with yard stacking area allocation takes less processing time than without yard stacking area allocation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1097-1108
• /
• 2019

In VLBI(Very Long Baseline Interferometry), the observed data created in many observatories which are far away from each other should be collected in correlation center for data analysis. Traditionally, observed data is moved by transportation such as car or airplane. But it is replaced with data transfer over the network rapidly as the advancement of information technology, and therefore, international cooperative research is also now more widely expanding. e-KVN(electronic Korean VLBI Network) has been upgraded two times so the network interface of KVN has been evolved to the highest specification of 100GbE. During this time period, the portion of network usage for VLBI observations and experiments in KVN has been increased exponentially. In this paper, we describe KVN VLBI system and network technology for the performance upgrade and advanced status monitoring between three radio astronomy observatories and Daejeon correlation center with KREONET(Korea Research Environment Open NETwork). Furthermore, future plan of e-KVN for the implementation of wide band VLBI observation will be also briefly discussed.

• Journal of KIISE:Information Networking
• /
• v.35 no.6
• /
• pp.482-496
• /
• 2008

Packet classification in the Internet routers requires multi-dimensional search for multiple header fields for every incoming packet in wire-speed, hence packet classification is one of the most important challenges in router design. Hierarchical packet classification is one of the most effective solutions since search space is remarkably reduced every time a field search is completed. However, hierarchical structures have two intrinsic issues; back-tracking and empty internal nodes. In this paper, we propose a new hierarchical packet classification algorithm which solves both problems. The back-tracking is avoided by using the set-pruning and the empty internal nodes are avoided by applying the binary search tree. Simulation result shows that the proposed algorithm provides significant improvement in search speed without increasing the amount of memory requirement. We also propose an optimization technique applying controlled rule copy in set-pruning.

• Journal of KIISE:Software and Applications
• /
• v.37 no.8
• /
• pp.591-598
• /
• 2010

In this study, we propose a new method for generating candidate solutions based on the Cauchy probability distribution in order to complement the shortcoming of the solutions generated by the normal distribution. The Cauchy probability distribution has infinite mean and variance, and it has rather large probability in the tail region relative to the normal distribution. Thus, the Cauchy distribution can yield higher probabilities of generating candidate solutions of large-varied variables, which in turn has an advantage of searching wider area of variable space. In order to compare and analyze the performance of the proposed method against the conventional method, we carried out an experiment using benchmarking problems of real valued function. From the result of the experiment, we found that the proposed method based on the Cauchy distribution outperformed the conventional one for all benchmarking problems, and verified its superiority by the statistical hypothesis test.