• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.6
• /
• pp.512-521
• /
• 2017

Telemetry ground station use very high gain directional antenna systems that are sensitive to interference from other RF communication systems, Without appropriate interference protection, these systems could be severely impacted or even rendered useless for mission support. In ECC, we suggested ans interference analysis method between LTE-TDD system and telemetry ground station using 2.3GHz. In this paper, based on the interference analysis scenario considered in Electronic Communication Committee, We have derived mutual coexistence separation distance between telemetry ground station and LTE-TDD system(Base station, User equipment) in Spatial domain.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.131-138
• /
• 2023

In this paper, a free space optical communication device that can be used in a mobile base station of several km or less was fabricated and its characteristics were investigated. To overcome the loss due to atmospheric transmission, an optical fiber amplifier (EDFA) with an output of 23 dBm or more was used. In order to increase the focusing speed and miniaturization of the laser beam, an optical lens was manufactured, and a transmission lens was designed to have beam divergence within the range of 1.5 to 1.8 [mrad]. A PT module that controls PAN/TILT was fabricated in order to reduce pointing errors and effective automatic alignment between transceiver devices. In this study, Reed-Solomon (RS) code was used to maintain the transmission quality above a certain level. It was manufactured to be able to communicate at a wireless distance of 300m in a weather situation with visibility of 300m. For performance measurement, it was measured using BERT and eye pattern analyzer, and it was confirmed that BER can be maintained at 2.5Gbps.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.162-175
• /
• 2020

The purpose of this study is to deal with practical investigation, which blends symbolism on spatio-temporal level-especially typography in three-dimensional environment-and the symbolism of written language in the context of visual communication. Up until now, typography research and education have mainly been centered on two-dimensional environment and printing technology, such as the paper. However, this study is the result of this researcher's direct design and implementation of projects on typography aside from paper. Accordingly, this study is to provide an opportunity to raise the level of reason and expression used in visual communication to a new level and to expand its scope. To ensure the efficient progress of the project, this study was to identify the structure, system, and process of communication first. Furthermore, this study was to investigate two-dimensional and three-dimensional typography as the backbone of visual communication. In addition, several representative 3D typography works are analyzed in context and used as the conceptual framework of the project conducted for this study. Based on these results, this research verifies and suggests the possibility practically and objectively by creating the project series entitled Rhetorical Space in 3D typography. In addition, this research gives an opportunity to visualize ideas aimed at the development of character-based visual language and visual communication design in the realm of the more spatial, physical, and three-dimensional public environment.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2006.11a
• /
• pp.44-48
• /
• 2006

The premise of this study is that an ultimate objective in planning an exhibition space is spectators' experiences shaped by a result of their first-hand experiences and responses within an exhibition space, and this result can be recognized in the spectators' movement. The purpose of this paper is finding out characteristics and differences between amounts and methods of information which gives visitors through sign system as communication design, by this analysis, providing clues necessary for design in museum.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.1
• /
• pp.16-23
• /
• 2011

In this paper, nonlinear model predictive control (NMPC) is addressed to develop formation guidance for multiple unmanned aerial vehicles. An NMPC algorithm predicts the behavior of a system over a receding time horizon, and the NMPC generates the optimal control commands for the horizon. The first input command is, then, applied to the system and this procedure repeats at each time step. The input constraint and state constraint for formation flight and inter-collision avoidance are considered in the proposed NMPC framework. The performance of NMPC for formation guidance critically degrades when there exists a communication failure. In order to address this problem, the modified optimal guidance law using only line-of-sight, relative distance, and own motion information is presented. If this information can be measured or estimated, the proposed formation guidance is sustainable with the communication failure. The performance of this approach is validated by numerical simulations.

• Journal of Astronomy and Space Sciences
• /
• v.20 no.4
• /
• pp.313-318
• /
• 2003

A communications satellite system placed in three-Lagrange points, $L_3$, $L_4$ and $L_5$, of the restricted three-body problem in Earth-Moon system is proposed in this paper. LEO satellite constellation has been another choice of communications system. The proposed system which is alternatives of limited geostationary orbit resources, has some weak points such as long distance from the Earth, relatively expensive launch cost, long delay time, more required power, and so on. It has good points like less efforts (fuel) for station keeping, less eclipses, etc. This system has limitations for applications to provide commercial services but it is still some attractive points.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.4
• /
• pp.43-49
• /
• 2018

Modern people communicate in a digital space without being limited by physical space and time. On the internet, people's desire for self-expression is getting bigger, and the most common self-expression tool is characters. Characters are visual materials to express human thoughts and desires. This study is a method to positively express the viewer's self in an interactive Hangeul system. The proposed system produces new formative shapes and meanings of Hangeul through the process of deconstructing and reconstructing the characters. Immediate character transformations that are synchronized with the motion of the viewer act as a tool of self-expression by inducing the viewer's active interaction repeatedly. Therefore, the proposed interactive Hangeul is more than enough to be used as a new graphic tool beyond the text to be read, and it is highly likely to develop into cultural contents using it.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.16-17
• /
• 2008

본 논문은 다중 안테나 시스템에서 두 심볼을 묶어서 전송함으로써 최대 전송률을 유지하는 준직교 시공간 블록 부호(QOSTBC : quasi orthogonal space time block codes)의 성능을 평가하였다. 이제까지 제안된 여러 QOSTBC 부호는 다차원 신호 공간에서의 신호 설계 방식에 차이가 있고 결과적으로 diversity 차수는 동일하지만 부호 이득에 차이를 보인다. 채널 부호기를 결합한 경우와 그렇지 않은 경우에 여러 가지 방식의 QOSTBC의 성능을 모의실험으로 평가하였다.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.360-363
• /
• 1999

Video data compression is a major key technology in the field of multimedia applications. Variable-length coding is the most popular data compression technique which has been used in many data compression standards, such as JPEG, MPEG and image data compression standards, etc. In this paper, we present memory efficient VLC decoder architecture for MPEG-2 application which can achieve small memory space and higher throughput. To reduce the memory size, we propose a new grouping, remainder generation method and merged lookup table (LUT) for variable length decoders (VLD's). In the MPEG-2, the discrete cosine transform (DCT) coefficient table zero and one are mapped onto one memory whose space requirement has been minimized by using efficient memory mapping strategy The proposed memory size is only 256 words in spite of mapping two DCT coefficient tables.

• Journal of the Optical Society of Korea
• /
• v.13 no.2
• /
• pp.286-293
• /
• 2009

In this paper, we present an optimal shape design method for a dielectric microlens which is used to focus an incoming infrared plane wave in wideband, by exploiting the finite difference time domain (FDTD) technique and the topology optimization technique. Topology optimization is a scheme to search an optimal shape by adjusting the material properties, which are design variables, within the design space. And by introducing the adjoint variable method, we can effectively calculate a derivative of the objective function with respect to the design variable. To verify the proposed method, a shape design problem of a dielectric microlens is tested when illuminated by a transverse electric (TE)-polarized infrared plane wave. In this problem, the design variable is the dielectric constant within the design space of a dielectric microlens. The design objective is to maximally focus the incoming magnetic field at a specific point in wideband.