• 제목/요약/키워드: Sources of stress

검색결과 348건 처리시간 0.024초

한국인(韓國人) 단백질(蛋白質)-열량(熱量) 소요량(所要量)에 대(對)한 연구(硏究) (장기간급식(長期間給食)에 의(依)한 한국식이(韓國食餌)의 적정성(適正性)에 대(對)한 평가(評價)) (Long-Term Evaluation of the Adequacy of Korean Diet to Meet the Protein-Energy Requirement of Young Korean Male Adult)

  • 주진순
    • Journal of Nutrition and Health
    • /
    • 제14권4호
    • /
    • pp.209-219
    • /
    • 1981
  • To evaluate long-term metabolic response of free-living Korean subjects consuming local sources adequately or slightly below habitual intake. Subjects, six male medical students aged 23-25 years were free-living, but consumed diets in the metabolic unit. They were healthy as determined from medical laborarory tests. They belong to the Korean middle-class. Temperature of outdoor during study were ranged between -2 to $26^{\circ}C$, whereas the indoor were $18-22^{\circ}C$. Animal protein ranged between 25-30% of total calorie. The three meals and a vitamin supplement to meet recommendation were given daily. Three 50day periods following the design were used to test the protein-energy adequacy of the diet. Urinary nitrogen excretion was measured daily. Fecal samples were pooled for the last 5 days of each week. Nitrogen balance was computed using 5mg N/Kg skin and miscellaneous losses. Body weight was measured daily. The study was covered on 126 metabolic observations weekly. Body weight changes were relatively stable with the energy intake of 37-44Kca1/kg, and N-balances were also relatively stable, but it was influenced by physical and or mental stress somehow. It could be assumed that the mean protein and energy requirement were $190{\pm}10mg$ N/Kg with $41{\pm}2$ Kcal/kg, and the mean digestibility of protein was 81% on these subjects with the experimental conditions. The protein requirement, however, could be cut down somewhat with some limited increaing of energy intake under parameters of N-balance and maintaining body weight. It was also observed a tendency of the requirement were getting smaller with the increase of body size.

  • PDF

여자 중학생의 섭식장애 패턴 분류와 이에 따른 체형인식, 체중조절행태 및 식습관과의 관계에 대한 연구 (Classification of Eating Disorder Patterns of Female Middle School Students and their Association with Self-body Image, Weight Control Behavior, and Eating Behavior)

  • 이지은;이일하
    • 한국지역사회생활과학회지
    • /
    • 제17권2호
    • /
    • pp.89-103
    • /
    • 2006
  • This study was performed to provide sources of nutrition education for female adolescents by identifying eating disorder patterns and their relationships with self-body image, weight control, and eating behavior. A total of 329 female middle school students were recruited and completed a general characteristics survey, the Eating Attitudes Test(EAT-26), a perception of self-body image survey, a concern for weight control survey, an eating behavior survey, and the Mini Dietary Assessment Index(MDA). Eating disorder patterns were identified to be obesity stress and weight control(OW), risk of binge eating(RB), and dietary restraint(DR) by factor analysis. OW pattern was related with stout body shape, body dissatisfaction, experience of weight control, skipping of dinner, and low MDA score. RB pattern was associated with lean body shape, body satisfaction, indiscreet snack behavior, and the eating time of snacks. The DR pattern was associated with normal body shape, regular meal times, desirable snack behavior, and high MDA scores. The results indicated that the eating patterns of adolescent were not identical to existing diagnostic categories. Furthermore, each eating pattern displayed different characteristics of perception on self-body image, concern for weight control, and eating behavior. In conclusion, nutrition education for female middle school students could reflect the different characteristics of each eating disorder pattern.

  • PDF

증기터빈 저압 L-1단 블레이드-디스크 연성 진동 특성 분석 (Vibration Analysis for the L-1 Stage Bladed-disk of a LP Steam Turbine)

  • 이두영;배용채;김희수;이욱륜;김두영
    • 한국소음진동공학회논문집
    • /
    • 제20권1호
    • /
    • pp.29-35
    • /
    • 2010
  • This paper studies causes of the L-1 blade damage of a low pressure turbine, which was found during the scheduled maintenance, in 500 MW fossil power plants. Many failures of turbine blades are caused by the coupling of aerodynamic forcing with bladed-disk vibration characteristics. In this study the coupled vibration characteristics of the L-1 turbine bladed-disk in a fossil power plant is shown for the purpose of identifying the root cause of the damage and confirming equipment integrity. First, analytic and experimental modal analysis for the bladed-disk at zero rpm as well as a single blade were performed and analyzed in order to verify the finite element model, and then steady stresses, natural frequencies and corresponding mode shapes, dynamic stresses were calculated for the bladed-disk under operation. Centrifugal force and steady steam force were considered in calculation of steady and dynamic stress. The proximity of modes to sources of excitation was assessed by means of an interference diagram to examine resonances. In addition, fatigue analysis was done for the dangerous modes of operation by a local strain approach. It is expected that these dynamic characteristics will be used effectively to identify the root causes of blade failures and to perform prompt maintenance.

도전성 고무 매트를 이용한 수소 기반 시설에서 제전 신뢰성 향상 (Conductive Rubber for Enhanced Safety in Hydrogen-based Facilities from Electrostatic Discharge)

  • 이수운;고재환;송지원;김찬우;김충일;김해술;허만억;정재형;송형준
    • 한국안전학회지
    • /
    • 제39권1호
    • /
    • pp.9-15
    • /
    • 2024
  • Hydrogen-based electricity and transportation systems are widely recognized as sustainable power sources. However, the low ignition energy of hydrogen, only 1/10th that of conventional fossil fuels, poses a safety concern involving the risk of ignition due to electrostatic discharge from facility workers. Therefore, anti-static systems are imperative for hydrogen-based electricity facilities. To address this, we propose a reliable conductive rubber mat (CRM) to ensure the safety of these facilities. Unlike conventional anti-static floors that utilize conductive paint (CP), the CRM features a uniform distribution of conductive components in chemically and mechanically stable rubber. As a result, the CRM is unyielding to polar solvents (such as ethanol and hydrosulfuric acid) and non-polar solvents (like mineral oil) without increasing its resistance. Moreover, the CRM can withstand mechanical stress. Consequently, the human-body voltage of workers on the CRM would be sufficiently low enough to protect them from hydrogen explosions, thereby enhancing overall safety.

β-Carotene Production from Dunaliella salina Cultivated with Bicarbonate as Carbon Source

  • Xi, Yimei;Wang, Jinghan;Xue, Song;Chi, Zhanyou
    • Journal of Microbiology and Biotechnology
    • /
    • 제30권6호
    • /
    • pp.868-877
    • /
    • 2020
  • Bicarbonate has been considered as a better approach for supplying CO2 to microalgae cells microenvironments than gas bubbling owing to cost-effectiveness and easy operation. However, the β-carotene production was too low in Dunaliella salina cultivated with bicarbonate in previous studies. Also, the difference in photosynthetic efficiency between these two carbon sources (bicarbonate and CO2) has seldom been discussed. In this study, the culture conditions, including NaHCO3, Ca2+, Mg2+ and microelement concentrations, were optimized when bicarbonate was used as carbon source. Under optimized condition, a maximum biomass concentration of 0.71 g/l and corresponding β-carotene content of 4.76% were obtained, with β-carotene yield of 32.0 mg/l, much higher than previous studies with NaHCO3. Finally, these optimized conditions with bicarbonate were compared with CO2 bubbling by online monitoring. There was a notable difference in Fv/Fm value between cultivations with bicarbonate and CO2, but there was no difference in the Fv/Fm periodic changing patterns. This indicates that the high concentration of NaHCO3 used in this study served as a stress factor for β-carotene accumulation, although high productivity of biomass was still obtained.

Momordica charantia extract supplementation tend to affect improvements in body composition and metabolic parameters on tennis players: A pilot study

  • Kwak, Jae-Jun;Yook, Jang Soo;Ha, Min-Seong
    • 한국응용과학기술학회지
    • /
    • 제36권4호
    • /
    • pp.1164-1171
    • /
    • 2019
  • Dietary supplements derived from natural sources are an essential factor in optimizing athletic performance. It has been proposed that the extract of Momordica charantia (M. charantia) that is known as a bitter melon can be potentially used as a novel supplement for health promotion. This pilot study aimed to examine the effects of the M. charantia extract when administered in the form of a sports drink, and we evaluated changes in body composition and metabolic factors in tennis players after 4-week consumption of the extract. Eight male college tennis players were instructed to consume an M. charantia extract 6 times per day (3 in the morning and 3 in the afternoon, and the total daily intake was 600 ml). Collected data were analyzed using paired t-tests to examine the changes over time after consumption of the M. charantia extract. The results revealed a significant increase in the trunk muscle mass, basal metabolic rate, and daily calorie intake (p < 0.05). Levels of protein, minerals, and total body water showed an increased tendency (not statistically significant), whereas intracellular water and extracellular water showed a decreased trend. Furthermore, fat-free mass, skeletal muscle mass, and muscle mass showed an increased tendency. In conclusion, consumption of the M. charantia extract caused an increase in parameters related to protein, muscle mass, and metabolism. It seems that follow-up studies related to fatigue, inflammation, and stress hormones related to the M. charantia extract consumption would be needed.

불균질지층내 지하수 유동의 확률론적 분석 : 무작위성 분포 재생을 통한 가상적 수리시험 (Stochastic Simulation of Groundwater Flow in Heterogeneous Formations: a Virtual Setting via Realizations of Random Field)

  • Lee, Kang-Kun
    • 대한지하수환경학회지
    • /
    • 제1권2호
    • /
    • pp.90-99
    • /
    • 1994
  • 수리전도도의 대수값이 정규 분포를 갖고 또 공간적 상관관계를 갖는 무작위 변수라는 가정하에 지하수 유동영역 안에서 불균질한 수리전도도를 발생시켰다. 발생된 수리전도도의 거리에 따른 공분산값의 변화는 이론적으로 제시되는 변화와 잘 일치된다. 지하수위와 수리전도도는 확률론적으로 작용하는 무작위 변수들로 보고 수리 전도도와 지하수위에 대한 확률 통계적 분석을 위해 몬테카를로 시뮬레이션 방법과 유한요소법을 이용하였다. 지하수위와 수리전도도의 분산값은 지하수 유동영역의 점원, 경계조건, 수위구배, 흐름방향 및 상관 거리에 따라 특징적인 분포를 보인다. 특히 수위와 수리전도도간의 공분산값이 음수인 영역은 유동 시스템의 변화에 영향을 거의 받지 않는 영역으로 볼 수 있어서 영향권의 도출과 관계시킬 수 있다.

  • PDF

복합재를 이용한 수평축 풍력터빈 회전 날개의 공력 및 구조설계에 관한 연구 (Aerodynamic and Structural Design for Medium Size Horizontal Axis Wind Turbine Rotor Blade with Composite Material)

  • 공창덕;방조혁;오동우;김기범;김학봉
    • 한국추진공학회지
    • /
    • 제1권2호
    • /
    • pp.12-21
    • /
    • 1997
  • 무공해 에너지원은 화석에너지의 고갈과 환경오염의 심각한 문제로 인하여 절실히 요구되고 있는 실정이다. 그중 풍력발전 시스템은 타 에너지원에 비해 여러 가지 측면에서 유리한 점을 가지고 있다. 본 연구에서는 500㎾급 풍력발전 시스템을 개발함에 있어, 적합한 공력성능 및 구조성능을 가지는 회전날개 설계과정을 수행하였다. 공력설계는 운용지역의 풍황을 고려하여 회전날개의 외형을 결정하였고 이를 바탕으로 공력성능해석이 수행되었으며, 구조설계는 복합재료를 사용하여 쉘-스파 구조를 갖도록 설계하여 굽힘 및 비틀림 그리고 피로수명에 대한 구조해석이 수행되었다. 그 결과 4m/s의 미풍에서도 운용가능하며, 12m/s에서는 정격출력 500㎾를 생산할 수 있는 형상이 설계되었고, 또한 20년 이상의 피로수명이 확보되었으며, 공진 등의 동적인 문제도 발생하지 않음을 확인하였다.

  • PDF

유산균의 항산화 효과 (Antioxidative Ability of Lactic Acid Bacteria)

  • 김현수;함준상
    • 한국축산식품학회지
    • /
    • 제23권2호
    • /
    • pp.186-192
    • /
    • 2003
  • 최근 항산화제 연구는 식품, 의약품, 농업분야 등 다방면에서 이용될 수 있기 때문에 많은 산업적 효과를 기대할 수 있다. 특히 지금까지 알려진 항산화제가 약한 활성, 독성 및 사용상의 한계로 인하여 사용하는데 있어서 많은 문제점을 내포하고 있다. 따라서 천연으로부터 보다 안전하고 강한 활성을 지닌 천연항산화제의 개발이 요구된다. 활성산소 제거능력이 향상된 유산균은 식품산업에 중요하며 인간 장내 외인성, 내인성 산화적 스트레스 제거에 중요하다고 생각된다. 따라서 유산균을 이용한 항산화제의 고부가가치 창출을 위해서는 생물학적 기능연구 및 질병모델계에서의 효능평가가 이루어져야 하며 항산화제의 효능검정 및 항산화제 작용 메커니즘 등 다양한 방면의 연구가 병행되어야 할 것으로 생각된다

LED 광을 이용한 그림자 무아레 방법의 감도 향상 및 모바일 전자 기판의 변형 측정 (Sensitivity Improvement of Shadow Moiré Technique Using LED Light and Deformation Measurement of Electronic Substrate)

  • 양희주;주진원
    • 마이크로전자및패키징학회지
    • /
    • 제26권4호
    • /
    • pp.141-148
    • /
    • 2019
  • 모바일 기기로 사용되는 전자기판은 여러 가지 다양한 재료로 구성되어 있으며, 제조시나 사용 환경에서 온도가 변하면 각 재료의 열팽창 계수의 차이로 인하여 변형과 응력집중이 발생하게 된다. 그림자 무아레 방법은 비접촉으로 전체 영역에 걸친 면외변위를 측정하는 광학적 방법이지만 고감도 적용을 위해서는 탈봇 현상의 극복이 필요하다. 본 논문에서는 그림자 무아레 기법에서 발생하는 탈봇 현상을 극복하기 위하여 다양한 파장의 LED 광원을 이용하고, 파장의 변화가 탈봇 거리에 미치는 영향에 대해 연구하였다. 위상 이동법을 이용함으로써 10 ㎛/fringe 이내의 측정 감도를 확보할 수 있는 실험방법을 제안하고 이를 평가하였으며, 이 방법을 모바일 회로 기판의 열변형 측정에 적용하였다. 백색광을 사용한 경우에서는 탈봇 현상으로 인하여 측정이 불가능한 영역이 여러 군데 존재하였으나, 파란색 LED 광을 사용한 경우에는 대부분의 영역에서 감도 6.25 ㎛/fringe의 정밀한 무아레 무늬를 얻어낼 수 있음을 확인하였다.