• 제목/요약/키워드: Source terminals

검색결과 76건 처리시간 0.024초

Z-소스 교류 컨버터 토폴로지의 동적 전압 보상기 (Dynamic Voltage Restorer(DVR) with a Z-Source AC Converter Topology)

  • 임영철;정영국
    • 조명전기설비학회논문지
    • /
    • 제24권9호
    • /
    • pp.36-43
    • /
    • 2010
  • This paper proposes a new type of voltage sag-swell compensator based on a Z-source AC-AC converter. The proposed topology employs a pulse width modulation (PWM) Z-source AC-AC converter along with a injection transformer. A safe commutation strategy is used to eliminate voltage spikes on switches without snubber circuit. During a voltage sag or swell, the proposed system controls the adding or missing voltage and maintains the rated voltage of sinusoidal waveform at the terminals of the critical loads. The proposed system is able to compensate 20[%] voltage swell and is also able to compensate 60[%] voltage sag. In order to control and detect the voltage sag and swell, the peak voltage detection method is applied. Also, the operating principles of the proposed system are described, and a circuit analysis is provided. Finally, PSIM simulation and experimental results are presented to verify the proposed concept and theoretical analysis.

Denoising Mapping Utilizing Constellation Symmetry in Denoise-and-Forward Two-Way Relay Channels

  • Zheng, Jianping;Bai, Baoming;Li, Ying
    • ETRI Journal
    • /
    • 제34권4호
    • /
    • pp.617-620
    • /
    • 2012
  • The denoising mapping with the closest-neighbor clustering (CNC) method in denoise-and-forward two-way relay channels is studied. Specifically, the symmetry of the constellations in source terminals A and B is utilized to reduce the complexity of the CNC method. The specific case considered first to illustrate how the constellation symmetry works in the CNC method is the quadrature phase-shift keying constellation in A and B and the single-antenna deployment in all terminals. This case study shows that an enormous complexity reduction can be achieved. Next, the result is extended to multiple-antenna scenarios and square quadrature amplitude modulations.

항만서비스품질경영에 관한 실증연구 - 부산항 컨테이너터미널을 중심으로 - (An Empirical Study on the Quality Management for Port Services - Primarily on Container Terminals in Busan -)

  • 최영로;신한원;고수복
    • 한국항해항만학회지
    • /
    • 제26권2호
    • /
    • pp.153-159
    • /
    • 2002
  • 본 연구는 부산항 컨테이너 터미널이 품질경영을 통한 경쟁력을 향상시키기 위하여 어떠한 서비스 품질경영활동들에 노력을 집중해야 하는지에 대한 실증적인 연구이다. 품질경영활동의 공통된 요소들과 이 요인들 간의 인과관계를 분석하여 결과를 해석하고 항만서비스 품질 경영 관리에 미치는 관리적 시사점을 제시하고 있다. 자료수집은 부산항 컨테이너 터미널의 종사자 170명을 대강으로 설문지와 개인면담을 통해 이루어졌으며, 측정변수의 신뢰성과 타당성을 분석하기 위해 Cronbach's $\alpha$계수와 요인분석을 이용하였다. 그리고 품질경영시스템의 구성개념인 풀질경영의 원천과 활동, 그리고 성과간의 인과관계를 분석하기 위해서는 Amos4.0을 이용한 SEM을 실시하였다.

An Energy Saving Cooperative Communications Protocol without Reducing Spectral Efficiency for Wireless Ad Hoc Networks

  • 단디쉬엔;공형윤
    • 한국통신학회논문지
    • /
    • 제34권2A호
    • /
    • pp.107-112
    • /
    • 2009
  • Spectral efficiency of current two-phase cooperative communications protocols is low since in the second time the relay forwards the same signal received from the source to the destination, the source keeps silent in this time. In this paper, we propose a novel cooperative communications protocol where the signal needed to transmit to the destination is sent in both phases, the source and the relay also transmit different signal to the destination thus no loss of spectral efficiency. This protocol performs signal selection based on log-likelihood ratio (LLR) at relay and maximum likelihood (ML) detection at destination. While existing protocols pay for a worse performance than direct transmission in the low SNR regime which is of special interest in ad hoc networks, ours is better over the whole range of SNR. In addition, the proposal takes advantages of bandwidth efficiency, long delay and interference among many terminals in ad hoc network. Simulation results show that the proposed protocol can significantly save total energy for wireless ad hoc networks.

Parallel and Sequential Implementation to Minimize the Time for Data Transmission Using Steiner Trees

  • Anand, V.;Sairam, N.
    • Journal of Information Processing Systems
    • /
    • 제13권1호
    • /
    • pp.104-113
    • /
    • 2017
  • In this paper, we present an approach to transmit data from the source to the destination through a minimal path (least-cost path) in a computer network of n nodes. The motivation behind our approach is to address the problem of finding a minimal path between the source and destination. From the work we have studied, we found that a Steiner tree with bounded Steiner vertices offers a good solution. A novel algorithm to construct a Steiner tree with vertices and bounded Steiner vertices is proposed in this paper. The algorithm finds a path from each source to each destination at a minimum cost and minimum number of Steiner vertices. We propose both the sequential and parallel versions. We also conducted a comparative study of sequential and parallel versions based on time complexity, which proved that parallel implementation is more efficient than sequential.

부산항 컨테이너부두 임대료 산정체계 표준화 방안 (Standardization of the Lease Fee Assessment System of Busan Port Container Terminals)

  • 길광수
    • 한국항만경제학회지
    • /
    • 제27권3호
    • /
    • pp.65-90
    • /
    • 2011
  • 부산항만공사(BPA)가 관리하고 있는 부산항 컨테이너부두는 민간운영사가 임차하여 운영하고 있다. 운영사가 BPA에 납부하는 연간 임대료는 BPA의 2010년도 연간 매출액 2,444억원의 약 66%에 달하는 1,609억원으로, BPA 총수입의 대부분을 차지하는 매우 중요한 수입원이다. 그러나 부산항의 컨테이너부두 임대료는 부두 신설에 따라 운영사 선정 입찰시 적용한 임대료 산정체계의 차이, 1999년 임대료 산정체계를 수입공유제에서 고정임대료제로 변경하면서 부두별로 적용한 임대료 산정방법 및 산정기준의 상이, 북항과 신항간 임대료 산정시기의 차이 및 그에 따른 임대료 산정기준의 상이 등으로 형평성 논란을 빚어왔다. 따라서 본 연구에서는 현행 부산항 컨테이너부두 임대료 산정체계의 문제점을 분석하여 임대료 산정체계의 표준화 방안을 제안한 후 신설부두와 기존부두를 대상으로 컨테이너부두 표준 임대료 산정체계 적용 사례를 제시하였다. 임대료 산정체계를 표준화하기 위해서는 할인 현금흐름법(DCF법)으로 산정방법을 일원화해야 한다. 또한 주요 임대료 산정기준이 되는 산정기간, 할인율, 물가상승률 및 임대료 인상률, 임대료 산정물량, TEU당 매출단가, 인건비 등의 제반 운영비용을 표준화해야 한다. 신설부두에 대해서는 표준화된 임대료 산정체계를 그대로 적용할 수 있으나, 기존부두에 대해서는 특히 임대료 산정물량, 투자비 및 재투자비, 장비 및 시설유지비 등을 신설부두와 달리 적용해야 한다. 표준화된 임대료 산정체계를 도입할 경우 임대료 산정체계의 객관성과 일관성은 물론 부두간 임대료 수준의 형평성을 도모할 수 있다. 또한 표준화된 임대료 산정체계를 도입하여 임대인의 투자비회수 관점과 운영사의 운영수지보전 관점 임대료 수준을 동시에 고려한 적정 임대료를 산정함으로써 임대 차인 간 이익의 균형을 도모할 수 있다. 본 연구는 컨테이너부두 임대료 산정체계의 표준화에 관한 초기의 연구라는 점에서 학술적인 의의와 실무적인 기여가 있을 것으로 기대된다. 향후 운영비용 추정 및 적정 운영원가 산정을 위한 비용함수 및 활동기준원가계산(activity based costing) 방식의 도입, 임대료 산정물량의 적정화를 위한 과학적 기법 도입 등 보다 다양한 시각이나 방법론으로 후속 연구가 이루어지기를 기대한다.

GTO를 사용한 새로운 방식의 전류원 인버터 (A New GTO Current Source Inverter)

  • 조규형;박선순
    • 대한전기학회논문지
    • /
    • 제36권5호
    • /
    • pp.328-338
    • /
    • 1987
  • A New CSI which is belived to be much advantageous than ASCI is proposed. The new CSI operates in a much wider frequency range with much lower voltage stresses on the motor terminals and power devices compared with ASCI. Simulation results show that the new CSI is about factor of four times superior to ASCI in operating frequency range or in voltage stress. The exterimental results are shown for a 5HP induction motor.

  • PDF

Source-Coupled Backgate쌍을 이용한 CMOS 차동입력단의 특성 (Characteistics of a CMOS Differential Input-Stage Using a Source-Coupled Backgate Pair)

  • 강욱;이원형;한우종;김수원
    • 전자공학회논문지A
    • /
    • 제28A권1호
    • /
    • pp.40-45
    • /
    • 1991
  • It is well known that the conventional differential source-coupled pair uses gates as its input terminals. This input pair provids a high open-loop gain, a large CMRR, and a good PSRR. For these reasons, the input pair has been used widely as an input stages of the differential amplifiers, but a narrow linear input range of this structurelimits its application in the area of some analog circuit design. A novel CMOS source-coupled backgate pair is proposed in this paper. The bulk of MOSFET is exploited and input devices are biased to operate in ohmic region. With this topology, the backgate pair of the wide linear input range and variable transconductance can be obtained. This backgate input differential stage is realized with the size of W/L=50/25 MOSFETs. The results show the nonlinear error is less than $\gamma$1% over 10V full-scale range for the bias current of 200$\mu$A with 10V single power-supply.

  • PDF

단상 Quasi Z-소스 동적전압보상기(DVR) (A Single-Phase Quasi Z-Source Dynamic Voltage Restorer(DVR))

  • 이기택;정영국;임영철
    • 전력전자학회논문지
    • /
    • 제15권4호
    • /
    • pp.327-334
    • /
    • 2010
  • 본 논문에서는 새로운 quasi Z-소스 토폴로지의 동적전압보상기를 제안한다. 제안된 시스템은 quasi Z-소스 PWM 교류-교류 컨버터를 기반으로 하고 있으며, 입력단과 출력단은 공통 접지이고, 연속적인 입력전류 모드(CCM)로 동작하는 특징을 가지고 있다. 전원 전압의 sag와 swell을 검출하기 위하여, 피크치 전압 검출기법이 사용되었으며, 제안된 시스템의 동작 원리를 제시하고 회로 해석을 하였다. 제안된 시스템은 30% 전압 swell과 60%의 심한 전압 sag가 발생하여도 과전압과 부족전압에 대하여 순간적으로 보상을 하였으며, 부하전압을 정현파의 정격전압으로 유지할 수 있었다. PSIM 시뮬레이션과 실험결과를 통하여 본 연구의 타당성을 입증하였다.

Wind Power Grid Integration of an IPMSG using a Diode Rectifier and a Simple MPPT Control for Grid-Side Inverters

  • Ahmed, Tarek;Nishida, Katsumi;Nakaoka, Mutsuo
    • Journal of Power Electronics
    • /
    • 제10권5호
    • /
    • pp.548-554
    • /
    • 2010
  • In this paper, a 1.5 kW Interior Permanent Magnet Synchronous Generator (IPMSG) with a power conditioner for the grid integration of a variable-speed wind turbine is developed. The power-conditioning system consists of a series-type 12-pulse diode rectifier powered by a phase shifting transformer and then cascaded to a PWM voltage source inverter. The PWM inverter is utilized to supply sinusoidal currents to the utility line by controlling the active and reactive current components in the q-d rotating reference frame. While the q-axis active current of the PWM inverter is regulated to follow an optimized active current reference so as to track the maximum power of the wind turbine. The d-axis reactive current can be adjusted to control the reactive power and voltage. In order to track the maximum power of the wind turbine, the optimal active current reference is determined by using a simple MPPT algorithm which requires only three sensors. Moreover, the phase angle of the utility voltage is detected using a simple electronic circuit consisting of both a zero-crossing voltage detecting circuit and a counter circuit employed with a crystal oscillator. At the generator terminals, a passive filter is designed not only to decrease the harmonic voltages and currents observed at the terminals of the IPMSG but also to improve the generator efficiency. The laboratory results indicate that the losses in the IPMSG can be effectively reduced by setting a passive filter at the generator terminals.