• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.275-278
• /
• 2005

In this study, the dynamic properties of a floor impact sound isolation pad expressed in terms of the natural frequency, the dynamic stiffness per unit area and the loss factor are measured by the resonant method. By using the measured dynamic properties, the vibration transmissibility diagram is obtained for each isolation pad, which is compared with the values tested by the impact sound sources at the room in an apartment. From the comparative results, it is found that the noise reduction Performances. of isolation pads are closely connected with the natural frequency and the dynamic stiffness per unit area.

• Spatial Information Research
• /
• v.13 no.1 s.32
• /
• pp.79-90
• /
• 2005

The purpose of this study is to estimate quantitatively soil loss and sediment yield in alpine farmland. For this purpose, Naerinchon watershed in Gangwon province was selected as our study area and total annual soil loss and sediment yield was estimated respectively by the Revised Universal Soil Loss Equation (RUSLE) model and the Sediment Delivery Distributed (SEDD) model. The results of this study clearly show that dry field areas have significant impact on the total soil erosion and sediment yield compared with other land use. Dry field areas represent only $2.6\%$ of the total area of the watershed but soil loss and sediment yield account for $10.9\%$ and $33.12\%$ of the total amount respectively Especially as with alpine farmland, this result is more clearly shown. These areas account for $1.8\%$ of the entire watershed but contribute to $7.7\%$ and $15\%$ of the total soil loss and sediment yield respectively. From the above results, we can know that alpine farmland is important source of soil loss and sediment yield and it is need to prevent and control. soil erosion from alpine filmland urgently.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.3
• /
• pp.79-88
• /
• 2007

This paper suggests a hierarchial method to select the target sites for the nonpoint source pollution management considering factors which reflect the interrelationships of significant outflow characteristics of nonpoint source pollution at given sites. The factors consist of land slope, delivery distance to the outlet, effective rainfall, impervious area ratio and soil loss. The weight of each factor was calculated by an analytic hierarchy process(AHP) algorithm and the resulting influencing index was defined from the sum of the product of each factor and its computed weight value. The higher index reflect the proposed target sites for nonpoint source pollution management. The proposed method was applied to the Baran HP#6 watershed, located southwest from Suwon city. The Agricultural Nonpoint Pollution Source(AGNPS) model was also applied to identify sites contributing significantly to the nonpoint source pollution loads from the watershed. The spatial correlation between the two results for sites was analyzed using Moran's I values. The I values were $0.38{\sim}0.45$ for total nitrogen(T-N), and $0.15{\sim}0.22$ for total phosphorus(T-P), respectively. The results showed that two independent estimates for sites within the test water-shed were highly correlated, and that the proposed hierarchial method may be applied to select the target sites for nonpoint source pollution management.

• Journal of Biosystems Engineering
• /
• v.21 no.1
• /
• pp.21-33
• /
• 1996

This study was to obtain basic information needed to develop the effective weed control method for the production of less polluted agricultural products by inducing viability loss of weed seeds in soil with infrared irradiation. Ceramic plates were heated by LPG with the aid of forced air and the infrared produced from plates was used as the heat source for heating soil. The soil heated in this study was sandy loam with four levels of moisture contents (0.5, 5.1, 9.1, 15.0% wb). The temperature distribution was measured at various soil depths when soil was irradiated with infrared for different irradiation time (30, 60, 90 sec). The soil depths with duration time of minimum 3 minutes over $80^circ C$, temperature inducing viability loss of weed seeds, were investigated. When the moisture content of soil was 0.5% and 5.1% wb, the soil depths which can induce viability loss of weed seeds was greatly increased with increasing irradiation time. When 30 seconds of irradiation time was applied on soil with moisture content of 9.1% or 15.0% wb, any depths of soil tested in this study was not reached to the temperature of 8$0^{\circ}C$. Generally, the soil depth being needed for viability loss of weed seeds was decreased with increasing moisture content of soil.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.3
• /
• pp.234-240
• /
• 2021

In this paper, the mask-based speech enhancement is improved for effective speech recognition in noise environments. In the mask-based speech enhancement, enhanced spectrum is obtained by multiplying the noisy speech spectrum by the mask. The VoiceFilter (VF) model is used as the mask estimation, and the Spectrogram Inpainting (SI) technique is used to remove residual noise of enhanced spectrum. In this paper, we propose a combined loss to further improve speech enhancement. In order to effectively remove the residual noise in the speech, the positive part of the Triplet loss is used with the component loss. For the experiment TIMIT database is re-constructed using NOISEX92 noise and background music samples with various Signal to Noise Ratio (SNR) conditions. Source to Distortion Ratio (SDR), Perceptual Evaluation of Speech Quality (PESQ), and Short-Time Objective Intelligibility (STOI) are used as the metrics of performance evaluation. When the VF was trained with the mean squared error and the SI model was trained with the combined loss, SDR, PESQ, and STOI were improved by 0.5, 0.06, and 0.002 respectively compared to the system trained only with the mean squared error.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2375-2387
• /
• 2024

The passive safety systems (PSSs) within water-cooled reactors are meticulously engineered to function autonomously, requiring no external power source or manual intervention. They depend exclusively on inherent natural forces and the fundamental principles of reactor physics, such as gravity, natural convection, and phase changes, to manage, alleviate, and avert the release of radioactive materials into the environment during accident scenarios like a loss-of-coolant accident (LOCA). PSSs are already integrated into such operating commercial reactors as the Advanced Pressurized Reactor-1000 MWe (AP1000) and the Water-Water Energetic Reactor-1200 MWe (WWER-1200) are adopted in most of the upcoming small modular reactor (SMR) designs. Examples of water-cooled SMR PSSs are the passive emergency core-cooling system (ECCS), passive containment cooling system (PCCS), and passive decay-heat removal system, the designs of which vary based on reactor system-design requirements. However, understanding the accident-event progression and phases of a LOCA is pivotal for adopting a specific PSS for a new SMR design. This study covers the accident-event progression for direct vessel injection (DVI) small-break loss-of-coolant accident (SB-LOCA), associated physics phenomena, knowledge gaps, and important figures of merit (FOMs) that may need to be evaluated and assessed to validate thermal-hydraulics models with an available experimental dataset to support new SMR design and development.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.4
• /
• pp.583-592
• /
• 1998

In this paper, the cell loss rate is analyzed in terms of the input traffic stream of different speed in ATM network. The cell loss rate is calculated by birth-death process of Leaky-Bucket mechanism as the representative algorithm of usage parameter control. The cell loss rate assumed 2-state MMPP input process to be birth-death process by considering the character of token pool about finite capacity queue. The results from numerical analysis show that the cell loss rate decreases abruptly according to the buffer size increase. The computer simulation by SIMSCRIPT II.5 has been done and compared with on/off input source case to verify the analysis results.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.118-123
• /
• 2009

In this paper, we propose packet selection and significance based interval allocation algorithm for real-time streaming service. In real-time streaming of inter-frame (and layer) coded video, minimizing packet loss does not imply maximizing QoS. It is true that packet loss adversely affects the QoS but one single packet can have more impact than several other packets. We exploit the fact that the significance of each packet loss is different from the frame type it belongs to and its position within GoP. Using packet dependency and PSNR degradation value imposed on the video from the corresponding packet loss, we find each packet's significance value. Based on the packet significance, the proposed algorithm determines which packets to send and when to send them. The proposed algorithm is tested using publicly available MPEG-4 video traces. Our scheduling algorithm brings significant improvement on user perceivable QoS. We foresee that the proposed algorithm manifests itself in last mile connection of the network where intervals between successive packets from the source and to the destination are well preserved.

• Earthquakes and Structures
• /
• v.17 no.6
• /
• pp.557-566
• /
• 2019

The evaluation of the seismic hazard for a given site is to estimate the seismic ground motion at the surface. This is the result of the combination of the action of the seismic source, which generates seismic waves, the propagation of these waves between the source and the site, and site local conditions. The aim of this work is to evaluate the sensitivity of dynamic response of extended structures to spatial variable ground motions (SVGM). All factors of spatial variability of ground motion are considered, especially local site effect. In this paper, a method is presented to simulate spatially varying earthquake ground motions. The scheme for generating spatially varying ground motions is established for spatial locations on the ground surface with varying site conditions. In this proposed method, two steps are necessary. Firstly, the base rock motions are assumed to have the same intensity and are modelled with a filtered Tajimi-Kanai power spectral density function. An empirical coherency loss model is used to define spatial variable seismic ground motions at the base rock. In the second step, power spectral density function of ground motion on surface is derived by considering site amplification effect based on the one dimensional seismic wave propagation theory. Several dynamics analysis of a curved viaduct to various cases of spatially varying seismic ground motions are performed. For comparison, responses to uniform ground motion, to spatial ground motions without considering local site effect, to spatial ground motions with considering coherency loss, phase delay and local site effects are also calculated. The results showed that the generated seismic signals are strongly conditioned by the local site effect. In the same sense, the dynamic response of the viaduct is very sensitive of the variation of local geological conditions of the site. The effect of neglecting local site effect in dynamic analysis gives rise to a significant underestimation of the seismic demand of the structure.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.6
• /
• pp.604-609
• /
• 2009

To investigate the potential use of microbial heme as an iron source, recombinant Escherichia coli coexpressing ALA synthase (HemA) as well as the NADP-dependent malic enzyme (MaeB) and dicarboxylic acid transporter (DctA) were cultured. The typical red pigment extracted from the recombinant E. coli after 38 h showed highest absorbance at 407 nm, and the amount of iron in 38.4 mg of microbial heme extract derived from 6-1 fermentation broth was 4.1 mg. To determine the commercial potential of the recombinant E.coli-synthesized iron-associated heme as an iron source, mice were fed the iron-free provender with the microbial heme extract. The average body weight reduction of mice fed non-iron provender was 2.3%, whereas no detectable weight loss was evident in mice fed microbial heme addition after 15 days. The heme content of the blood from microbial heme fed mice was 4.2 mg/ml whereas that of controls was 2.4 mg/ml, which implies that the microbial heme could be available for use as an animal iron source.