• Environmental Analysis Health and Toxicology
• /
• v.26
• /
• pp.2.1-2.7
• /
• 2011

Objectives: N-Nitrosodimethylamine (NDMA) is classified as a probable human carcinogen by the United States Environmental Protection Agency (US EPA) and is formed during the chlorination of municipal drinking water. In this study, selected nitrosamines were measured in chlorinated drinking water collected from Chuncheon, Kangwon-do, Republic of Korea, and a risk assessment for NDMA was conducted. Methods: Twelve water samples were collected from 2 treatment plants and 10 household taps. Samples were analyzed for 6 nitrosamines via solid-phase extraction cleanup followed by conversion to dansyl derivatives and high-performance liquid chromatography-fluorescence detection (HPLC-FLD). Considering the dietary patterns of Korean people and the concentration change of NDMA by boiling, a carcinogenic risk assessment from ingestion exposure was conducted following the US EPA guidelines. Results: NDMA concentrations ranged between 26.1 and 112.0 ng/L. NDMA in water was found to be thermally stable, and thus its concentration at the end of boiling was greater than before thermal treatment owing to the decrease in water volume. The estimated excess lifetime carcinogenic risk exceeded the regulatory baseline risk of $10^{-5}$. Conclusions: This result suggests that more extensive studies need to be conducted on nitrosamine concentration distributions over the country and the source of relatively high nitrosamine concentrations.

• Journal of the Korean Society of Safety
• /
• v.35 no.6
• /
• pp.1-8
• /
• 2020

In recent years, hydrogen has received much attention as an alternative energy source to fossil fuels. In order to ensure safety from the increasing number of hydrogen refueling stations, prevention methods have been required. In this regard, this study suggested an approach to reduce the risk of hydrogen refueling station by increasing Safety Integrity Level (SIL) for a Steam Methane Reformer (SMR) in On-Site Hydrogen Refueling Station. The worst scenario in the SMR was selected by HAZOP and the required SIL for the worst scenario was identified by LOPA. To verify the required SIL, the PFDavg.(1/RRF) of Safety Instrumented System (SIS) in SMR was calculated by using realistic failure rate data of SIS. Next, several conditions were tested by varying the sensor redundancy and proof test interval reduction and their effects on risk reduction factor were investigated. Consequently, an improved condition, which were the redundancy of two-out-of-three and the proof test interval of twelve months, achieved the tolerable risk resulting in the magnitude of risk reduction factor ten times greater than that of the baseline condition.

• The Journal of the Korean life insurance medical association
• /
• v.28 no.1_2
• /
• pp.15-18
• /
• 2009

Background: Recent emergence of drug-resistant tuberculosis such as multidrug-resistant tuberculosis(MDR-TB) or extensively drug-resistant tuberculosis(XDR-TB) has become important health care problems. It has also became grave issues for insurance industries in determining medical risks. We have therefore strived to analyze the comparative mortality rates for drug-resistant tuberculosis through utilization of results from previous articles. Methods: Comparative mortality was calculated from source articles using mortality analysis methods. Results: Mortality ratio of MDR-TB was estimate to 1200%, and excess death rate was 110 per 1,000. Comparative mortality between MDR-TB and XDR-TB by Korean $study^{(1)}$ were 1750, 382, 405, 443, 1025, and 357%, for each 10 months study intervals, respectively. Total mortality ratio was 594% and total excess death rate was 60 per 1,000person. It was determined that the risk of XDR-TB was much greater than MDR-TB. Discussion; Pending the development of a novel anti-tuberculosis drug, it would be prudent to steer clear insuring XDR-TB during underwriting phase due to high medical cost that it creates.

• Journal of Forest and Environmental Science
• /
• v.31 no.4
• /
• pp.297-302
• /
• 2015

With the intention to solve environmental problems caused by synthetic plastics from petroleum resources, biodegradable polyurethane foams and thermosetting moldings were prepared from biomass, such as wood and wheat bran by liquefaction method. Biodegradability of these biomass-based polymeric materials was investigated. In activated sludge, polyurethane foams from liquefied wheat bran and thermosetting molding from phenolated wood were decomposed approximately 14% and 29% for 20 days, respectively. One of the wood fungi, Coriolus versicolor was able to grow without supplemental nutrition, only with distilled water and polyurethane foam as a nutrition source. Risk assessments were also conducted and results showed that estrogenicity, mutagenicity, and carcinogenicity were not observed in the extractives of biomass- based polymeric materials.

• The Journal of the Korean life insurance medical association
• /
• v.29 no.2
• /
• pp.18-21
• /
• 2010

Background: The kidney transplantation is increasing. The kidney donation of a living donor is more common in Korea than in other countries. Underwriters may encounter a case of a kidney donor. So we need to determine medical risk for a living kidney donor. Methods: Comparative mortality figures were calculated from a source article using mortality analysis methods. Results: Mortality Ratio of a living kidney donor was estimated to 106%, and Excess Death Rate was 0.89 per 1000. Discussion: A healthy kidney donor is quite within standard, even better in terms of medical risk.

• Toxicological Research
• /
• v.32 no.1
• /
• pp.65-72
• /
• 2016

Man-made cadmium (Cd) emissions can be transported between environmental matrices and the food chain. Food is the primary source of Cd exposure among general population as a consequence of the bioconcentration of Cd from soil. Chronic Cd exposure has been reported to be associated with chronic kidney disease, osteoporosis, diabetes, cardiovascular disease and cancer. The Joint FAO/WHO Expert Committee on Food Additives (JECFA) established the safe level of Cd intake as provisional tolerable monthly intake (PTMI) of $25{\mu}g/kg\;bw$ in 2010. The major food groups that contribute to the most Cd exposure are rice and grains, shellfish and sea food, meat including edible offal, and vegetables. A number of studies reported the high Cd contaminated levels in foods from polluted areas in Thailand. The results are of high concern since the contaminations occur in foods that are major Cd contributors. Thus, in this review, the current situations of Cd contaminated foods in polluted areas of Thailand are summarized. In addition, the Cd intakes from selected scenarios are estimated to assess the potential health risk to consumers and the suggestions are also included.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 1997.10a
• /
• pp.41-48
• /
• 1997

The seismic risk in Seoul Metropolitan Area(latitude 37.0$^{\circ}$~37.8$^{\circ}$, longitude 126.5$^{\circ}$~127.5$^{\circ}$)based on all Korean earthquake data of Modified Mercalli Intensity equal to or greater than V is evaluated by extreme value method and point source method. The seismic risk estimated from all data turned out to be lower than from the data since the Chosen dynasty during which seismic data appear to be rather complete. The damaging earthquake of park horizontal ground acceleration grater than 0.1g turns out to occur with 90% probability of being exceeded in 200 years when the data since the Chosen Dynasty are used.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.11
• /
• pp.558-565
• /
• 2000

In this paper, we propose a method for mitigating for mitigating the effect of voltage of voltage sag in radial power distribution systems using load transfer switching (LTS). The term of LTS is defined that the weakness load points for voltage sag transfer to the alternative source during the fault clearing practices. The sequenced of proposed LTS method is divided into the search of weakness points for voltage sag using the risk assessment model and transfer behavior of weakness points. The search of weakness point is carried out using the risk assessment model of voltage sag and Monte Carlo simulation method and the historical reliability data in Korea Electric Power Corporation (KEPCO) are also used. Through the case studies, we verify the effectiveness of proposed LTS method and present the searching method of effective application points of LTS method using the risk assessment model.

• Journal of Korea Multimedia Society
• /
• v.25 no.6
• /
• pp.793-806
• /
• 2022

As the IMO introduced MASS (Maritime Autonomous Surface Ships), ISO(International Organization for Standardization) announced ISO 19847 of a maritime data sharing standard for collecting and remotely managing data of ship systems. Previous literature evaluated the risk using HAZOP for ISO 19847 and proved that risk assessment is useful through experiments. However, redundancy of ISO 19847 ship data server which is one of the risk reduction method suggested in previous literature, was designed but couldn't tested due to the limitations of the conditions. So, in this study, to prove the usefulness of the ship data server redundancy of ISO 19847 which was not tested in previous literature. It based on the design of previous literature, and the network of ship data servers was modeled using the SES/DEVS format and simulated using the DEVS# open source library.

• Korean Journal of Human Ecology
• /
• v.17 no.3
• /
• pp.485-492
• /
• 2008

The study is to provide the types of fashion consumption of male and female university students and to analyze fashion involvement to the types and students' source of fashion information. Then the correlations were examined between fashion involvement and source of fashion information. The data were analyzed by a factor analysis, one-way ANOVA, Duncan test, cluster analysis, cross-tabulation analysis. The results are as follows: 1. The awareness about fashion consumption is classified into five factors: "hedonic consumption", "impulsive consumption", "brand loyal consumption", "prudent consumption", and "independent consumption". The fashion involvement to the types is categorized into four factors; "pleasure", "trend", "image", and "risk awareness". The source of fashion information is categorized into "mass media", "product information", and "personal information". 2. The fashion consumption is classified into three types: "an independent consumer type", "a brand loyal/ prudent consumer type", and "an impulsive consumer type". 3. In the fashion involvement to the types and the source of fashion information, there is a high correlation between the factors of "mass media" and "trend", "product information" and "pleasure" and "personal information" and "trend".