• Journal of Ocean Engineering and Technology
• /
• v.8 no.1
• /
• pp.62-70
• /
• 1994

In order to estimate the detection range of a active SONAR system, the SONAR equation is commonly used. In this paper, an algorithm to calculate detection range in active SONAR system as function of SONAR depth and target depth is presented. For given SONAR parameters and environment, the transmission loss and background level are found, signal excess is computed. Using log-normal distribution, signal excess is converted to detection probability at each range. Then, the detection range is obtained by integrating the detection probability as function of range for each depth. The proposed algorithm have been applied to the case of omni-directional source with center frequency 30Hz for summer and winter sound profiles. It is found that the optimal search depth is the source depth since the detection range increase at source depth where the signal excess is maximized.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2009.10a
• /
• pp.331-334
• /
• 2009

This paper presents the characteristics of external inductor for impulse current waveform with 10/350 ${\mu}s$ time parameters. Impulse generator was composed with capacitor having large capacitance and low working voltage for the safe of operator and small discharging sound. Parallel R-L-C circuits with crow-bar gaps and superposition method were proposed to make a high current lightning impulse according to IEC 62305-1. The high energy inductor with several taps for fitting half decay time T2 within the tolerance range and experimental data of inductance according to charging voltages were suggested.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.652-657
• /
• 2002

It is addressed that the turbulent broadband sound power from a sirocco fan can be modeled by the trailing edge noise. The trailing edge noise is usually influenced by inflow turbulence, separation and boundary layer on the blade. The design parameters such as solidity(c/s) and stagger angle are specified to predict performance and noise level because the separation and slip velocity are strongly affected by them along with the flow coefficient. This paper reports the effects of the stagger angle upon the trailing edge noise for various trailing edge shapes. It is believed that the serrated trailing edge provides break-up mechanism for organized convecting vortices, thereby reduce the overall noise level.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11b
• /
• pp.474-479
• /
• 2002

In this research, the relationship between physical measurements and subjective evaluations of floor impact noise in apartment building was quantified by applying the neural network analysis due to its complex and nonlinear characteristics. The neural network analysis was undertaken by setting up L-value, inverse A index, Zwicker parameters and ACF/IACF factors, as input data, which came from the measurements at real suites of apartment building having various sound insulations. The subjective responses from the psychoacoustic experiments were extracted as output data. Then, the reliability of the quantitative prediction for the subjective loudness was evaluated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.10a
• /
• pp.323-330
• /
• 1994

본 연구에서는 다공질 흡음재료 중 closed cell 구조를 갖는 발포수지재료(Foamed Material)에 음(sound)이 입사할 때 발생하는 흡음현상을 보다 정확히 예측하기 위해서 다공질 흡음재료에 대한 Biot 이론에 근거한 Allard의 모델링기법[4]을 이용하여 해석 프로그램을 개발하였고, 이를 이용하여 다공질 흡음재료가 단층(single layer)일 때 이 재료의 Surface Impedance와 흡음률(Absorption Coefficient)을 예측하고, 물성치(parameters)변화에 따른 다공질 흡음재료의 흡음특성을 분석하였으며, 이 재료가 자동차 제조시 사용되는 압연강판(rolled steel piate)에 부착되었을 때의 투과손실(Transmission Loss)을 예측하였고, 또한 다공질 흡음재료는 중고주파 대역의 음에 대한 흡음특성은 좋지만 저주파 대역의 음에 대한 흡음특성은 좋지 않으므로 흡음 재료의 저주파 대역의 흡음특성을 향상시키기 위해서 2층(two layers)으로 하였을 때의 흡음특성을 분석하였다. 본 논문의 연구결과는 자동차 제조시 사용되어지는 다공질 흡음재료는 물론 산업용기계나 건축용등 여러 분야에서 사용되어지는 다공질 흡음재료의 흡음특성 분석에 응용될 수 있으리라 기대된다.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.5
• /
• pp.383-392
• /
• 2013

Taguchi method is a technique widely used in industries to attain a reliable quality even under existence of various noise variables. Basically, it relies on the interactions between the controllable and the noise factors. Under insignificant interactions between the design parameters and noises, the effectiveness of Taguchi methodology will be doubtful. Furthermore, existence of strong interactions among controllable factors may undermine the power of Taguchi approach. An abundant crop may be expected by a well planned Taguchi approach. A well designed set of experiments is one of the important prerequisites for its successful result. For this, we must have a clear understanding on strengths and weaknesses of Taguchi methodology together with a sound knowledge on the applicable system. This study provides some insights on Taguchi approach based on two case examples of one successful and the other unsuccessful. Eventually, this research aims to facilitate deeper understanding and right application of Taguchi methodology in industries.

• Earthquakes and Structures
• /
• v.10 no.4
• /
• pp.735-755
• /
• 2016

This article presents a proposed analytical methodology to determine seismic force-resisting system R-values for steel diagrid framed systems. As current model building codes do not explicitly address the seismic design performance factors for this new and emerging structural system, the purpose of this study is to provide a sound and reliable basis for defining such seismic design parameters. An approach and methodology for the reliable determination of seismic performance factors for use in the design of steel diagrid framed structural systems is proposed. The recommended methodology is based on current state-of-the-art and state-of-the practice methods including structural nonlinear dynamic analysis techniques, testing data requirements, building code design procedures and earthquake ground motion characterization. In determining appropriate seismic performance factors (R, ${\Omega}_O$, $C_d$) for new archetypical building structural systems, the methodology defines acceptably low values of probability against collapse under maximum considered earthquake ground shaking.

• The Journal of the Acoustical Society of Korea
• /
• v.16 no.3
• /
• pp.5-12
• /
• 1997

In this paper, the 3 operator FM synthesis method has been devised on the basis of the analysis of Gayageum sounds. The parameters for the proposed synthesis algorithm has been implemented by C language. It is subjectively and objectively confirmed that the sounds synthesized by C language are very similar to the original sounds. The synthesis algorithm is also implemented by DSP, and the sounds from this experiment are close to the original ones.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.05
• /
• pp.426-429
• /
• 1997

This paper describes the relationship among physiological, behavioral signal, and subjective evaluation depending on arousal level. Nz and reaction time hall similar pattern with KSS level, but eyeblink rate was different from these two parameters. Eyeblink rate increased slowly from KSS level 1 to 5, and had high increasing rate at KSS 7. But it showed steep descent at KSS level 9. From the result of reaction time test, since human performance was decreased rapidly above the KSS level 5, it is desirable to give a subject some stimulus such as sound or aroma to rise arousal level above the KSS level 3.

• Proceedings of the KIEE Conference
• /
• 1999.11c
• /
• pp.824-826
• /
• 1999

In this paper, we design an Fuzzy-Neural Networks(FNN) by means of divisions of fuzzy input space with multi-input variables. Fuzzy input space of Yamakawa's FNN is divided by each separated input variable, but that of the proposed FNN is divided by mutually combined input variables. The membership functions of the proposed FNN use both triangular and gaussian membership types. The parameters such as apexes of membership functions, learning rates, momentum coefficients, weighting value, and slope are adjusted using genetic algorithms. Also, an aggregate objective function(performance index) with weighting value is utilized to achieve a sound balance between approximation and generalization abilities of the model. To evaluate the performance of the proposed model, we use the data of sewage treatment process.