• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.245-246
• /
• 2018

This paper is a multipurpose functional synthetic resin formwork which can replace existing euro form. We tried to improve the disadvantages such as work noise, stenosis, recyclability, and workability of Euroform system. As a result of the test, Euroform showed an average of 106.7dB and synthetic resin formwork showed an average of 100.4dB. Therefore, it is considered that the synthetic resin formwork has a great effect of noise reduction compared to the euro form.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.537-543
• /
• 2012

본 연구는 운전조건 하에서 감속기 내부기어의 가공정밀도와 소음의 연관 특성에 관한 실험적 연구이다. 이를 위하여 유성기어열로 이루어진 감속기를 제작하였으며, 내부 기어는 정밀도를 다르게 가공한 기어로서 4 세트를 제작하여 비교 실험하였다. 감속기에 대한 소음 및 진동 신호는 신호분석법에 의해 채집되었으며, 정지상태로부터 운전 가능 최고 속도까지 균등하게 증속하며 신호를 채집하였다. 또한 소음 레벨은 소음계를 이용하여 측정하여 비교하였다. 기어의 가공정밀도에 대한 평가는 한국 산업기술 시험원(ktl)에 의뢰하여 일본공업규격(JIS)에 준하여 객관적으로 평가되었으며, 이를 소음, 진동 신호와 함께 비교 분석하였다.

• 한국건축시공학회지
• /
• 제18권6호
• /
• pp.577-584
• /
• 2018

본 논문은 합성수지 거푸집 성능평가를 위해 길이 변화율, 충격시험, 소음테스트를 실시하였다. 또한 현장 적용을 통해 합성수지 거푸집 시공성에 대해 검토하였다. 실험결과, 가열 길이 변화 시험, 충격시험은 KS기준치를 모두 만족하는 것으로 나타났다. 소음 테스트의 경우 유로폼이 평균 106dB(A)을 나타냈으며, 합성수지 거푸집은 평균 100.4dB(A)을 나타났다. 음압레벨의 경우, 합성수지 거푸집이 유로폼보다 고주파영역에서 낮게 나타나 시공시 소음 피로도가 적고 주변민원은 감소할 것으로 판단된다. 마지막으로 현장적용결과, 콘크리트 타설 중 거푸집 휨 현상이나 배부름 현상은 발생하지 않았다. 또한 콘크리트 표면 마감도가 합성수지 거푸집이 유로폼면 보다 더 우수한 것으로 나타났다.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1401-1417
• /
• 2004

Experimental and computational studies were performed to determine the effects of different blade designs on a flow pattern inside a double-spindle counter rotating mower deck. In the experimental study, two different blade models were tested by measuring air velocities using a forward-scatter LDV system. The velocity measurements were taken at several different azimuth and axial sections inside the deck. The measured velocity distributions clarified the air flow pattern caused by the rotating blades and demonstrated the effects of deck and blade designs. A high-speed video camera and a sound level meter were used for flow visualization and noise level measurement. In the computational works, two-dimensional blade shapes at several arbitrary radial sections have been selected for flow computations around the blade model. For three-dimensional computation applied a non-inertia coordinate system, a flow field around the entire three-dimensional blade shape is used to evaluate flow patterns in order to take radial flow interactions into account. The computational results were compared with the experimental results.

• 수산해양기술연구
• /
• 제8권1호
• /
• pp.14-22
• /
• 1972

For the development of acoustic fishing method, the noises of fishes have been recorded and analy/'ed by many scientists. Some specimens of fishes were selected as such Cyprinus carpio, Ctenopharyngodon idellus Carassius carassius, and pagrosol1ms major in this experiment. The noises such as feeding noise, driving away noise, jumping noise and fi llip noise were recorded by the tape recorder, Sony Model 262, through the underwa te r microph I one, Oki ST 6582, and analyzed in frequencies bv octave band analyzer, Rion SA-55, and sound pressure level of source by sound level meter, Rion NA-opNN The supplied feed was placed within 5em apart from the hydrophone. The result of analyzed noises were as follow. Cyprinus carjJio; Feeding noise 250- 500 cps, 92- 99 dB Driving away noise 125-2, 000 eps, 101-112 dB Jumping noise 125-2, 000 eps, 99-116.5 dB Ctenopharyngodon idcllus; Driving away noise 125-1, 000 cps, 96-109 dB Carassius carassius; Feeding noise 250- 500 cps, 91. 5- 99.5 dB Driving away noise 125-1, 000 eps, 99-108 dB Carassius auratus Feeding noise 250 eps, 94-101 dB Driving away noise 125-1, 000 cps, 98-110 dB Pagrosomus major Feeding noise 230-500 cps, 90-101 dB Fillip noise 500 cps, 98-108 dB (1) Feeding noise was produced as like as snap noise of twig and gulping down saliva noise in human and dominant frequency range of the noise is 250-500 cps and noise level 90-101 dB. (2) It was found that feeding noise were not a monotonic but a complex tones though fish took the same food. (3) Driving away noise was produced not so keen and the wave form of the noise is rising very sharp and big amplitude in the oscillograph. Dominant frequency range of this noise was about 150-1, 000 cps and noise level 96-112 dB except thut of carp. (4) The frequency of snapper's fillip noise, when it produced by caudal fin in swimming at the surface of water, was 500 cps and noise level 93-108 dB snd that of jumping noise of carp about 150-2, 000 cps and noise level 99-116.5 dB.

• Safety and Health at Work
• /
• 제11권2호
• /
• pp.199-206
• /
• 2020

Background: In a wide range of industries, noise-induced hearing loss remains one of the most prevalent occupational problems. This study aimed to assess the noise exposure level and associated factors of hearing loss among textile workers in Yangon Region, Myanmar. Methods: A cross-sectional study was conducted at a Textile mill (Thamine), Yangon Region, from April to December 2018. In total, 226 workers who were randomly selected from 3 weaving sections participated in face-to-face interviews using a structured questionnaire. A digital sound level meter and pure-tone audiometer were used for the assessment of noise exposure level and hearing loss, respectively. Logistic regression analysis was performed to assess the associated factors of hearing loss. Results: In total workers, 66.4% were exposed to ≥85 dB(A) of noise exposure, and the prevalence of hearing loss was 25.7%. Age ≥35 years, below high school education, hearing difficulty, tinnitus, hypertension, > 9 years of service duration in a textile mill were positively associated with hearing loss. After adjusting confounding factors, age ≥35 years (adjusted odds ratio = 6.90, 95% confidence interval = 3.45-13.82) and tinnitus (adjusted odds ratio = 2.88, 95% confidence interval = 1.13-7.37) were persistently associated with hearing loss. Conclusion: Providing occupational hazard education and enforcement of occupational safety regulations should be taken to decrease the noise exposure level. The regular audiometry test should be conducted for assessment of hearing threshold shift. The employer needs to implement a hearing conservation program in workplace when noise exposure reaches or exceeds 85 dB(A) for 8 hours.

• 대한기계학회논문집B
• /
• 제26권9호
• /
• pp.1284-1291
• /
• 2002

Combustion instabilities are an important concern associated with lean premixed combustion. Laboratory-scale dump combustor was used to understand the underlying mechanisms causing combustion instabilities. Experiments were conducted at atmospheric pressure and sound level meter was used to track the pressure fluctuations inside the combustor. Instability maps and phase-resolved OH chemiluminescence images were obtained at several conditions to investigate the mechanism of combustion instability and relations between pressure wave and heat release rate. It showed that combustion instability was susceptible to occur at higher value of equivalence ratio (>0.6) as the mean velocity was decreased. Instabilities exhibited a longitudinal mode with a dominant frequency of ∼341.8 Hz, which corresponded to a quarter wave mode of combustor. Heat release and pressure waves were in-phase when instabilities occurred. Rayleigh index distribution gave a hint about the location where the strong coherence of pressure and heat release existed. These results also give an insight to the control scheme of combustion instabilities. Emission test revealed that NOx emissions were affected by not only equivalence ratio but also combustion instability.

• 한국전기전자재료학회논문지
• /
• 제25권10호
• /
• pp.837-843
• /
• 2012

Compared to conventional pure-tone audiometer(PTA), the computerized one has several advantages such as relatively lower price, better flexibility, and easy operation. In addition, the computerized PTA can be easily extended to support automatic calibration. In this study, the support of automatic calibration in the computerized PTA has been addressed using the Linux realtime spectrum analyzer and network. In terms of accuracy, the new automatic calibration machine was compared to the existing manually operated one. According to the comparison, normal operation and high accuracy were observed within the scope of the international standard.

• 한국임상수의학회지
• /
• 제15권1호
• /
• pp.124-130
• /
• 1998

This study was performed to evaluate the new surgical technique for debarking. Of the 8 mongrel dogs which underwent devocalization, 4 heads (group 1) received complete surgical removal of the vocal cords and another 4 heads (group 2) received fixation of vocal cords and vocal processes onto the thyroid cartilage. Volume of each dogs' voices was measured by a sound level meter(Function A) over 7 months at intervals of 10 days. All experimental animals'hematological values were measured before operation and postoperative at 2i 5 and 10 days. The changes of volume of dogs'voices and hematological values were analyzed by paired t-test. The volume in the dogs'voices in each group after operation was significantly lower than that before operation. At this results we detected that devocalizing effect was the same in each group. Postoperative volume of dogs'voices in group 1 had a tendency to increaser but group 2 had a tendency to decrease. The number of erythrocytes at 2 days after operation was significantly fewer than those before operation in group 1, but the group 2 did not have significant changes. The number of leukocytes at 2 days after operation significantly increased from those before operation in group 11 but the group 2 did not have significant changes. It was concluded that the new surgical technique, fixation of vocal cords and vocal processes onto the thyroid cartilages could be available for the devocalization of dogs and for the prevention of postoperative inflammation and blood loss.

• 한국수산과학회지
• /
• 제9권3호
• /
• pp.215-221
• /
• 1976

1976년 6월 10일부터 동년 8월 30일까지 본학 해양과학 연구소 하층 실험실에서 실험하였고 1975년 6월 7일에서 동년 8월 11일까지 약 2개월 동안에 풍양호, 척양호, 관악산호 등의 선박소음을 녹음한 테프로서 재생방음한 것을 음원으로 이용하였다. 이때 소음제어의 효과를 찾기 위해 A,B,C,D형의 실험용 직육면체인 방음실을 제작하여 실험실내에 배치하고 기관실소음과 발진기에 스피커를 연결해서 방음된 음압이 각방음제어실에 투과되는 음압 100분률과 또 각 방음제어실내에서 같은 조건으로 방음되는 경우에 자재와 형상이 다른 방음실내부 구조물에 따른 흡음효과를 조사 비교한 결과를 요약하면 다음과 같다. 1. 소음투과율은 실험실 외부음압이 60dB 일때 A형은 $69.7\%$였고 계속 10dB 증가함에 따라 $3.3\%$씩 증가하였고 D형에서는 $53.9\%$인 것이 10dB 증가함에 따라 $4.5\%$씩 증가했다. 2. 실험실인 외부음압이 100dB일 때 A,B,C,D형의 음압투과율은 81.6, 78.9, 75.3, $71.0\%$의 순으로 D형의 투과율이 낮아서 방음실로서는 D형이 가장 좋았다. 3. 대화에 지장이 없는 소음압은 75dB 이하이므로 A,B형을 제외하고 C,D형은 선박소음 제어실로서 유효했다. 4. 방음제어실내부 구조에 따른 흡음효과를 A,D형에서 비교하면 A형은 발진음일 때 거리 20cm에서 82dB로 가장 높고 80cm에서 76dB로 가장 낮았으며 100cm에서 77dB였고 140cm에서 78dB 정도 다시 증가해 반사음 현상이 일어났다. D형은 발진음일 때 거리 20cm에서 A와 같이 82dB였는데 80cm에서 72.5dB, 100cm에서 73dB, 140cm서에는 67dB로 A보다 12dB가 낮았다. 선박소음도 거리 20cm에서 A형은 77.5dB, D형은 77dB였는데 140cm에서는 A형이 74dB, D형이 63dB로 11dB의 차이로 D형이 낮아 역시 흡음효과가 A형 보다 D형이 좋았고 완벽한 무향실로서 반사음의 영향은 찾아 볼 수 없었다. 5. 매우 낮은 발진음일 때 흡음관계를 1000Hz를 기준삼아 보면 거리 20cm에서 C형은 44.7dB, D형은 45.4dB로 C형이 0.3dB로 악간 낮았으나 140cm에서 C,D형 모두가 44.3dB로서 같았다. 값싼 자재로서도 C형이 가장 흡음효과가 좋았다.