• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.949-953
• /
• 2004

In this paper, Power Flow Boundary Element Method(PFBEM) is studied as the numerical method for the vibration and sound predictions of complex structures in medium-to-high frequency ranges. NASPFA, the sound analysis software based on PFBEM, is developed and is used for the vibro-acoustic analysis. And also the developed software is used for the prediction of interior and exterior sound fields of vibrating structures and for the analysis of the multi-domain problems. To verify the accuracy, NASPFA is applied to the prediction of the energy distribution in the simple structures, and its results are compared with exact PFA solutions. And various practical vehicle systems are modeled and the distributions of the acoustical energy density are successfully predicted.

• 한국소음진동공학회논문집
• /
• 제12권12호
• /
• pp.950-955
• /
• 2002

The coupled finite/boundary element method is used in numerical analysis for acoustic radiation from the vibration of rectangular composite plate which is simply supported. This analysis is validated using the Wallace equation for an isotropic plate. Active control of sound fields has been tarried out using 3 pairs of piezoelectric sensor/actuator and a pair of viscoelastic material by Passive constrained layer damping treatment. The results show that the optimal placement of piezoelectric sensor/actuator and VE patch is required to control the sound fields from a vibrating composite plate.

• 한국음향학회지
• /
• 제6권3호
• /
• pp.5-16
• /
• 1987

본 논문에서는 충격으로 인한 점탄성층을 가진 경계가 고정된 원형 평판으로부터의 음압복사에 대해 이론적, 실험적으로 연구한다. 층을 가진 평판의 운동을 모우드 해석법과 회전 관성효과와 전단력에 의한 변형을 고려한 Mindlin 의 평판이론으로부터 구한 고유치를 이용하여 구한다. 탄성구와 평판사이의 접촉력은 Hertz 이론으로 구하고 평판의 진동으로부터 복사되는 음압은 Rayleigh integral에 의해 구한다. 또한 층을 가진 평판으로부터 복사되는 음의 파형과 발생되는 음을 감소시키는 방법을 예측한다.

• 소음진동
• /
• 제6권3호
• /
• pp.297-303
• /
• 1996

The general approach using sine series expansions was represented to evaluate the radiation loading from a vibrating surface on a simply supported cylinder. In this paper, the fluid-loading coefficients (radiation impedance) for a submerged finite cylindrical shell with an arbitrary end condition are defined and evaluated. The vibrations of cylindrical shell are expressed by using cosine series expansions to analyze the radiation impedance for a finite cylindrical shell. It is possible to represent the displacements at both ends of cylindrical shell in comparison with sine series. The direct and cross modal components of fluid-loading coefficients are shown and the validity of cosine series expansions are verified from the results of numerical computations. This approach and results are directly applicable in the analysis of sound radiation from subemerged finite cylindrical shell with arbitrary end conditions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.332.1-332
• /
• 2002

The study was performed as reduction method using finite and boundary element analysis on structure-borne noise radiated by dash panel of a real car. The radiation efficiency is used to estimate sound noise of dash panel. Curvature and edges of dash panel have effect on radiation efficiency. The simulation results of dash panel was ensured by comparison between experimental results and simulation results of a simple rectangular plate. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1032-1037
• /
• 2003

Although the holes on the shell case are very important fer the acoustic performance, it is difficult to solve the problem because the case includes thin bodies. Hence, in the past, only the method of trial and error, which depends on the engineer's intuition and experience, was available fur the design of holes. Many researchers have tried to solve the thin-body acoustic problems, since the conventional boundary element method (BEM ) using the Helmholtz integral equation fails to yield a reliable solution fer the numerical modelling of radiation anti scattering of sound from thin bodies. In the area of the analysis of thin-body acoustic problem, three approaches are generally used; the multi-domain BEM, the indirect variational BEM, and the normal derivative integral equation And there has been just a f9w study reported on the design optimization for the acoustic radiation problems by using only the conventional BEM. For the thin-body acoustics, however, no further study in the optimization fields has been reported. In this research, the normal derivative integral equation is adopted as an analysis formulation in the thin-body acoustics, and then used fur the optimization. The analytical approaches for the design of holes are proposed by using a topology optimization technique and a genetic algorithm. The proposed approaches are implemented and validated using numerical examples.

• 한국음향학회지
• /
• 제16권6호
• /
• pp.19-24
• /
• 1997

성덕 대왕 신종 상단부에 위치한 음통의 음향학적 역할을 규명하기 위하여 현장 실험을 수행하고 관찰된 현상을 설명하기 위한 모델을 제안하였다. 실험을 통하여 음통의 음향학적 특성을 대표하는 음통 출구단의 반사 계수, 방사 임피던스를 측정한 결과, 음통이 저주파(이경우 300Hz 이하)에서는 거의 모든 소리를 종 내부로 되돌리는 특성을 보이며, 그 이상의 고주파 성분은 효과적으로 종 밖으로 방사하는 특성을 갖고 있음을 확인하였다. 또한 음통에 대한 음향학적 모델링 및 이를 바탕으로 한 수치적 분석을 수행하였으며 실험결과와 대체적으로 경향이 일치하는 결과를 보여주고 있다.

• 한국소음진동공학회논문집
• /
• 제21권5호
• /
• pp.430-436
• /
• 2011

The purpose of this study is to analyze the vibration and sound generation characteristics of the sandwich panel. Two thick panels were assumed to be separated by a compliant viscoelastic core. The transverse vibration induced by an external impact was analyzed using the Rayleigh-Ritz method. For applying arbitrary boundary condition of the panels, the edges were assumed to be supported by the translational and rotational springs. The beam functions were used as the trial functions. The effect of the boundary condition and viscoelastic core on the resulting vibration characteristics was investigated. The radiated sound power was analyzed using the proposed numerical model and the Rayleigh integral. The dynamic properties of the core and the mass-stiffness-mass resonance frequency had significant influence on the impact sound.

• 한국음향학회지
• /
• 제16권4호
• /
• pp.94-100
• /
• 1997

성덕대왕 신종의 방사 음장 특성을 분석하기 위하여 30개의 마이크로폰으로 구성된 어레이를 이용하여 360개의 위치에서 음압을 측정한 후 원통형 음향 홀로그라피 방법을 적용하여 시간, 주파수별로 음장 해석을 행하였다. 타종 직후, 신종에서 방사되는 음장은 넓은 주파수 영역(800Hz까지 해석)에 걸쳐 고른 분포를 가지나 시간이 지남에 따라 고주파 성분은 급격히 감쇠하여 약 10초 이후에는 저주파 성분만이 존재한다. 마찬가지로 시간에 따른 음압 신호를 살펴보면 초기에 여러 성분의 모우드들이 중첩되어 복잡한 모양을 하고 있으나 10초 이후에는 한쌍의 저주파 성분(64.06Hz, 64.38Hz)에 의한 맥놀이 현상이 나타남을 확인할 수 있다. 이 맥놀이에 의한 여음이 초기의 화려하면서 장엄한 소리와 어우러져 신종만의 독특한 소리를 나타낸다. 맥놀이 현상은 종의 축에 대한 비대칭 현상에 의해 근접한 고유진동수를 가지기 때문에 발생하며 다른 고주파 성분에서도 쌍으로 존재하는 고유진동수를 관찰할 수 있다. 저주파 모우드의 경우 쌍으로 존재하는 방사 음장 형태는 길이 방향 절선 간격의 반에 해당되는 각도만큼 회전되어 나타난 것을 제외하고는 동일함을 알 수 있으며 고주파 모우드의 경우는 이보다 복잡한 모양을 이루고 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.103-108
• /
• 2001

The structure of hard disk drive(HDD) is excited by dynamic motion of a disk-spindle motor, and it makes sound noise. Therefore, the cover and the base of HDD should be designed to reduce noise and vibration induced by spindle motor. The prediction technique of sound pressure level(SPL) of a given structural shape enables us to design a cover and a base with much less vibration and noise. In this paper, we measured the force of disk-spindle motor and predicted SPL from HDD by computational simulation. To get a SPL of HDD by computational simulation, modal analysis and forced vibration analysis were performed with ANSYS, and sound radiation was computed using SYSNOISE. The calculated results were compared with experimental results and a good agreement was obtained. With this computer simulation procedure and design of experiment(DOE), optimal thickness of noise barrier and damper was calculated.