• International journal of advanced smart convergence
• /
• 제9권1호
• /
• pp.54-62
• /
• 2020

According to the Ministry of Health and Welfare, "Status of Registered Persons with Disabilities", the number of people with disabilities is 2,494,460 as of 2015. The lowest rates of children with disabilities were intellectual disabilities (23%) and mental disorders (33.3%). The highest rates of screening were blindness (97%), heart failure (94.4%), and hearing impairment (92.7%). 65.2% of visually impaired people who have already had a disability at the time of marriage, and the remaining 34.8% can be thought to be the cause of high incidence of disability after marriage. 'SID (Seed in the Dark)' project was designed to recapture the visually impaired parent's desire for attachment and the space difficulties of the blind who want to be a normal parent to their children through a visual impairment of a father with 7-year-old daughter. Using Gear VR(Virtual Reality), the general public was able to feel the surroundings as if they had no vision and focused on the hearing. Especially, We expressed the sound wave visually and added the hilarious game element which grasps the terrain of the maze by sound wave like a 'blind person who perceives the surroundings by sound' and catches up with daughter. People with disabilities who are far from mental illness often have a form of family with children. The fact that the rate of childbirth is high means that there is relatively little problem in daily life. It is wondered that the rate of blindness among the visually impaired, which accounts for 10% of the total disabled, is the highest at 97%. This is because, in the case of the visually impaired, the obstacle is often caused by aging, accidents, or diseases due to inherited causes rather than the visual disorder. In particular, However, the fact that there is an obstacle in vision that accounts for 83% of the body's sensory organs causes other difficulties in the nursing process of children who are non-disabled. Parents do not know the face of child when their visual impairment is severe. Parents are extremely anxious about worry that they will be lost or abducted if their children are not by their side. And that the child recognizes the disability of his or her parents other than the other parents easily and takes it as a deficiency. Since visually impaired parents are mentally mature parents with non-disabled people, they may want their children not to feel deprived of their disability. The number of people with visual impairments has been increasing since 2001, and people with impairments often become disabled. In addition, there is much research on the problem of nondisabled parents who have children with disabilities, while there is relatively little interest and research on the problem of nondisabled child rearing of parents with disabilities.

• 대한기계학회논문집A
• /
• 제20권7호
• /
• pp.2118-2133
• /
• 1996

A preform is designed by the backward tracing scheme of the rigid-plastic finite element method(FEM) for net-shape shell nosing components without machining after forming. The current process of the shell nosing requires cost-consuming machining to produce final products. Here, the backward tracing scheme of the rigid-plastic FEM, a novel method for preform design of metal forming processes, derives a sound preform for net-shape shell nosing product. The current process is simulated by the rigid-plastic finite element analysis to check the metal flow involved in the forming with a trial preform and its modified preform. The two preforms are found to be inadequate for net-shape shell nosing product. The first application of the back ward tracing scheme derives a preform producing a not-shape shell nosing product. The first application of the backward tracing scheme derives a preform producing a net-shape product numerically, but it is difficult to be formed economically as a preform. Thus an improved preform is designed by the badkward tracing scheme, which is suitable for net-shape manufacturing of the shell nosing components in view of economy of production and forming characteristics of the product. The preform in the current process and a modified preform are confirmed by a series of experiments and the results give the same deformation with the numerical ones. Finally the newly designed preform by the FEM was experimentally proved to be adequate in obtaining net-shape products.

• 한국음향학회지
• /
• 제34권3호
• /
• pp.210-218
• /
• 2015

초음파 영상 품질의 향상을 위해 트랜스듀서의 구동전압을 높이게 되면 트랜스듀서에서 열이 발생하여 환자의 피부 화상 및 트랜스듀서의 성능 저하를 초래할 수 있다. 따라서, 이렇게 온도가 상승하지 않도록 트랜스듀서 내의 열을 효율적으로 분산할 수 있는 방안에 대해 연구하였다. 이때 열 분산 해석 대상으로 중심주파수가 3 MHz이고 32채널을 가진 위상배열 트랜스듀서를 선정하였다. 먼저 트랜스듀서의 동작에 따른 발열 구조를 이론적으로 분석하였고, 그 결과로서 재료의 감쇠와 음압의 크기가 발열에 영향을 미치는 것을 확인하였다. 나아가 유한요소 해석을 통해 트랜스듀서 구성소자의 물성이 열 분산에 미치는 영향을 분석하였다. 분석된 결과를 바탕으로 트랜스듀서 내 열이 잘 분산되기 위한 구성소자의 열물성을 정하였다. 도출된 열 물성을 유한요소 해석 모델에 적용한 결과 환자와 접촉되는 부분인 음향렌즈의 최고온도가 원래 값의 51 %로 저하되었다.

• Journal of Welding and Joining
• /
• 제24권2호
• /
• pp.71-78
• /
• 2006

It has been reported that good quality weld beads are not easily obtained during the $CO_2$ CW laser welding of primer coated plate. However, by introducing a small gap clearance in the lap position, the zinc vapor can escape through it and sound weld beads can be acquired. Therefore, this study examines for keyhole behavior by observing the laser-induced plasma and investigates the relation between keyhole behavior and formation of weld defect. Laser-induced plasma has accompanied with the vaporizing pressure of zinc ejecting from keyhole to surface of primer coated plate. This dynamic behavior of plasma was very unstable and this instability was closely related to the unstable motion of keyhole during laser welding. As a result of observing the composition of porosity, much of Zn element was found from inner surface of porosity. But Zn was not found from the dimple structure fractured at the weld metal. By analyzing of vaporizing element in laser welding, a component ratio of Zn was decreased by introducing a small gap clearance. Therefore we can prove that the major cause of porosity is the vaporization of primer in lap position. Mechanism of porosity-formation is that the primer vaporized from the lap position accelerates dynamic behavior of the key hole and the bubble separated from the key hole is trapped in the solidification boundary and romaines as porosity.

• 한국콘텐츠학회논문지
• /
• 제11권9호
• /
• pp.118-128
• /
• 2011

영상에서의 음악의 기능은 내러티브의 보조적 역할에서부터 내러티브를 본격적으로 전개하는 주요소등으로 그 폭이 매우 넓다. 이는 최근의 영상, 광고, 뮤직비디오 등의 분야에서도 마찬가지다. 과거에도 청각적 장르인 음악을 시각적 영상으로 표현하는 시도가 꽤 많았으나, 장편 영화로까지 전개된 경우에는 디즈니의 <환타지아> 이전에는 거의 없었다. 따라서 본 논문에서는 디즈니 애니메이션인 <환타지아>와 <환타지아 2000>에 나타난 음악적 요소와 내러티브의 상관관계를 연구하여, 두 작품의 변별적 차이점을 살펴보고자 한다. 가장 뚜렸한 차이점을 지적하자면, <환타지아>에서는 음악작품에 내재된 본래의 의미론적 해석에 충실한 내러티브 구조의 영상이라면, <환타지아 2000>은 각각의 곡이 갖고 있는 총체적 음향의 특성을 최대한 표현하기 위한 내러티브의 영상물이라고 하겠다. 이와 같은 관점에서 그 차이점들을 상술하여 두 작품의 감상의 폭을 넓히는데 중점을 두고자 한다.

• 농촌계획
• /
• 제24권1호
• /
• pp.113-127
• /
• 2018

This study comprehends that the landscape of Ipsan Village is the accumulated output of the landscape management and social behavior by the historic personages through the reference research and field surveys. And the study sorted out the over-layered landscape characteristics of Ipsan Village by analyzing the dispersed landscape elements as follows. First, right before the start of Japanese invasions to Korea(1592-98), Tamjin(耽津) An(安) Family moved into Ipsan and started establishing the a single clan village. At a site with mountain background and facing the water(背山臨水), the village used to be a typical farming one with an organically planned road-system and housing area following the traditional order. However, the landscape has changed drastically since the 20th century with the construction of banks, roads and readjustment of arable land etc. Second, the original landscape, which can be figured out through the 'Gosanjaesibyukgyeong(高山齋十六景)' in the 18th century, shows its harmony with natural landscape: mountain & valley, stream & field, traditional trees, etc, cultural landscape: village, well, spring, etc, and momentary landscape: seasons, time, weather phenomena, sound, behavior, etc. Third, based on the second, 16 natural landscape elements: mountain & stream, planting, etc. and 25 cultural landscape elements: housing spaces, self-cultivation & ceremony spaces, community spaces and modern education & enlightenment spaces were selected and interpreted as landscaping meanings. Fourth, the over-layered landscape which stems from the compositive functions and inter-connectivity of landscape elements which consists Ipsan Village is regarded as 'Natural geographical and Fungsu landscape', 'Rural production and livelihood landscape', 'Confucian ceremony and symbolic landscape' and 'Modern education and enlightenment landscape.'

• 한국지반신소재학회논문집
• /
• 제6권1호
• /
• pp.17-25
• /
• 2007

본 연구에서는 유럽 등지의 해외에서는 일반적인 파일기초의 대안으로 연약지반에서 적용되고 있는 지오그리드로 보강된 쇄석기둥공법(GESC)의 유한요소해석 모델링에 관한 내용을 다루었다. 쇄석기둥 공법은 경제성 및 시공성 측면에서 효율적이며 이와 함께 액상화 방지에도 효과가 있는 것으로 알려져 있다. 최근 들어 더욱 발전된 형태인 지오그리드 감쌈 쇄석기둥공법(GESC)에 관한 연구가 진행되고 있는 실정이다. 본 연구의 목적은 GESC공법의 3차원 유한요소해석 모델링기법을 확립하고 이에 대한 거동특성에 관한 데이테베이스 수립에 두었다. 본 논문에서는 3차원 유한요소해석 모델링에 대한 상세내용과 GESC의 침하특성 효과를 평가하였다.

• 한국음향학회지
• /
• 제36권3호
• /
• pp.158-164
• /
• 2017

수중에서 은밀하게 움직이는 표적을 조기에 탐지하기 위한 선배열센서에 적용되는 통상의 하이드로폰은 표적신호의 크기만 측정할 뿐, 외부에서 들어오는 음향신호의 방향은 파악할 수 없는 한계가 있다. 이에 본 연구에서는 표적으로부터의 음향신호의 크기와 방향을 동시에 탐지할 수 있는 관성형 벡터 하이드로폰의 기본 구성품으로 두께 전단형 진동자를 제안하였다. 외력에 대한 진동자의 출력 전압을 해석할 수 있는 수식을 유도하였으며, PMN-PT 단결정 진동자에 대한 유한요소해석을 통해 수식의 타당성을 검증하였다. 본 연구에서 얻어진 해석 결과는 향후 두께 전단형 진동자로 구성된 관성형 벡터 하이드로폰 설계에 활용될 것이다.

• 구강회복응용과학지
• /
• 제19권3호
• /
• pp.219-237
• /
• 2003

he purpose of this study was to compare the fracture resistance of the IPS Empress ceramic crown with 1.0mm width rounded shoulder, which is usually recommended in all ceramic crown, and 0.5mm width chamfer finish lines on the maxillary first premolar. 30 sound maxillary first premolars were selected and then storaged in 5% NaOCl and saline. 15 teeth were performed preparation for each group(1.0mm rounded shoulder, 0.5mm chamfer). After 30 stone dies were made for each group, the IPS Empress ceramic crowns were fabricated and cemented with resin cement(Bistite resin cement, Tokuyama Soda Co. LTD., Japan) on the natural teeth. The cemented crowns were mounted on the positioning jig and the universal testing machine(Zwick Z020, Zwick Co., Germany)was used to measure the fracture strength, with stress loading on the occlusal surface between buccal and lingual cusp. And also, three-dimensional finite element model was used to measure the stress distribution with two types of the finish lines(1.0mm rounded shoulder, 0.5mm chamfer) and two loading conditions(both buccal and lingual cusp inclination, lingual cusp inclination only). The result of the this study were as follows. In the fracture resistance experiment according to the finish line, the mean fracture strength of rounded shoulder(842N) showed higher value than that of the chamfer(590N) (p<0.05). In the three dimensional finite element analysis of all ceramic crown, metal die and natural teeth model did not show any differences in stress distribution between finish lines. Generally, when force was loaded on the occlusal inclination of buccal and lingual cusp, the stress was concentrated on the loading point and the central groove of occlusal surface. When force was loaded only on the occlusal inclination of lingual cusp, the stress was concentrated on the lingual finish line and loading point.

• 터널과지하공간
• /
• 제8권4호
• /
• pp.321-331
• /
• 1998

기술적으로 타당성이 있는 설계와 안전하고 경제적인 시공을 달성하기 위하여 필요한 터널해석의신빙성 확보는 굴착 및 보강작업으로 이루어진 일련의 시공과정을 역학적으로 파악해야 하고 암반과 지보재의 반응 거동에 대한 이해가 선행되어야 한다. 따라서 터널의 굴착으로 야기되는 암반거동과 지보재의 반응거동에 관한 연구를 위해 이론해와 유한요소 프로그램을 사용하였다. 암반-지보 반응거동의분석 결과 숏크리트의 물성에 대한 영향을 정량적으로 파악할 수 있었다. 단계별 굴착단계를 모사한 3차원 유한요소 해석을 통하여 지반 물성치와 무지보 굴착길이 그리고 측압계수가 하중분담율에 미치는 영향분석을 통하여 하중분담율을 결정할 수 있었다. 이러한 인자들의 경향을 파악함으로써 실제 터널 해석에 적용할 수 있을것이라 판단된다.