• 한국산학기술학회논문지
• /
• 제4권2호
• /
• pp.114-119
• /
• 2003

본 연구는 폐수로부터 몇 가지의 유기오염물(Phenol, 2-Chlorophenol, Nitrobenzene)을 비분산 용매추출법으로 동시 제거하는 실험이다. 몇 가지의 용매(MIBK, IPAc, Hexane)에 대하여 분배계수를 구하였고, 용매와 폐수사이의 향류와 병류 흐름에 의한 추출 실험을 하였다. 수용액상의 유량이 증가함에 따라 용매와의 접촉시간이 짧아져 제거율이 떨어지고, 용매의 유량이 증가함에 따라 제거율이 증가함을 알 수 있었다. 그리고 병류보다는 향류에서 유기오염물의 제거율이 증가하는 것을 알 수 있었다. 이러한 결과를 토대로 유기오염물만이 아닌 다른 중금속 오염물 둥도 처리할 수 있는 산업용 폐수처리장치의 개발을 위한 기초자료로 쓰일 수 있다.

• 한국의류산업학회지
• /
• 제7권6호
• /
• pp.680-688
• /
• 2005

This study was carried out to investigate on the removal of oily and particulate soils from silk fabrics. Various kinds of solvents were used on the removal of two kinds of soils treated into the silk fabrics. The removal of oily soil was analyzed by liquid scintillation counting method, and the removal of oil and carbon particulate mixed soils was evaluated by measuring of reflectance on the surface of soiled fabrics with/without drysoap in solvent washing by Terg-o-tometer. The surfaces of fabrics were also observed by SEM before and after washing. The results obtained were as follows : oily soils were removed efficiently by various kinds of solvents regardless of kinds of silk fabrics in short washing time. The removal effect of solvents from the soiled silk fabrics were high in the order of isopropyl alcohol>trichloroethane>monochlorobenzene>ethylether>perchloroethylene. Oil and carbon particulate mixed soils could be efficiently removed by adding of drysoap in solvent washing. The removal of mixed soils were increased drastically with rinsing and increased drysoap. The removal of soils was more efficiently removed from degummed silk fabrics than from the raw silk fabrics.

• 한국의류학회지
• /
• 제19권3호
• /
• pp.548-559
• /
• 1995

The purpose of this study was 1) to investigate the effect of drycleaning on the removal of microorganisms according to on the conditions or the kinds of drycleaning solvent about the Quantity of microorganism which remains in kinds of the drycleaning solvent and the sludge after drycleaning. 2) to investigate the removal effect of :microorganisms in using drycleaning solvent repeatedly 3) to investigate the kinds of microorganism living in textiles. The re, ;ultras of tai, ; study were as follows; 1) less microorganisms remains in perchloroethylen than in petroleum solvent. The most microorganisms was isolated at the beginning stage during the drycleaning. 2) In fresh drycleaning solvents, Pseudomonas aeruginosa ATTIC 27853, taphylococcsu atreus ATTIC 6538. and Candida albicans 10529 were killed immediately, while in case of pesters solvents used for 6 month-drycleaning, Pseudomonas Aeruginosa ATTIC 27853 were survived a lot of still in 17 days. 3) On the kind of bacteria in textile goods, Pseudomonas acidovorans and Ewsipelothrix rhusiopathiae are isolated. a genus Rhodetorula is observed through microscope. On the kind of fungi in textile goods, genus Penicillins and genus Apergillus are found through microscope, genus Caddie and genus Trichophyton are found with shapes.

• Bulletin of the Korean Chemical Society
• /
• 제35권9호
• /
• pp.2711-2716
• /
• 2014

The high content of potassium in molasses limits its usage as a raw material for stock feed. Moreover, its high viscosity makes it difficult to develop an efficient removal process. In this study, ion exchange and solvent extraction experiments have been performed to investigate the removal of potassium from a mixture of molasses with water. Cationic exchange resins (AG50W-X8 and Diphonix) showed a high loading percentage of potassium but the occurrence of breakthrough in few bed volumes was a drawback to the industrial application. Among the cationic extractants (D2EHPA, PC 88A, Cyanex 272) tested in this study, saponified PC 88A was found to be the best extractant for the removal of potassium. Batch simulation studies on a three stage counter current extraction confirmed that 85% of potassium was removed from 50 wt % molasses solution in water by using saponifed PC 88A.

• Membrane and Water Treatment
• /
• 제4권2호
• /
• pp.95-108
• /
• 2013

Metal ions exist in seawater, groundwater and industrial wastewaters. These source waters can be recycled if their concentrations are reduced. A number of processes can be applied for this purpose. Liquid-liquid extraction is one of the promising methods. In this paper, experimental results are presented on the removal of Cr(VI) using Aliquat-336, a reactive carrier, in sunflower oil (a non-toxic solvent). The performance of this new system is compared with those of kerosene (a toxic solvent). The extent of removal of Cr(VI) from samples with high and low concentrations are presented. The process was upgraded to a bench-scale module that can selectively remove about 50-90% Cr(VI) from samples of groundwater. Thus this process can produce water within the acceptable range for recycling and for use in secondary purposes such as irrigation.

• 청정기술
• /
• 제23권4호
• /
• pp.357-363
• /
• 2017

본 연구에서는 초임계 이산화탄소/n-butyl acetate ($scCO_2$/n-BA) 공용매를 사용하여 네거티브형 포토레지스트(PR)를 제거하는 실험을 진행하였다. $scCO_2$와 n-BA의 용해도 평가를 통해 n-BA가 $scCO_2$와 균일하게 섞이는 조건을 실험적으로 측정하였다. 다양한 실험 변수를 조정하여 포토레지스트 제거 실험을 진행하였고, 미노광 포토레지스트 제거에 대한 최적의 조건을 확립하였다. 또한, 노광된 PR과 미노광 PR의 제거율을 비교하여 $scCO_2$/n-BA 공용매의 선택적 제거 성능을 확인하였다. 노광된 PR은 $scCO_2$/n-BA 공용매 환경에서 매우 안정적으로 존재함을 관찰하였고, 미노광 PR은 160 bar, $40^{\circ}C$, 75 wt% n-BA 이상의 농도에서 완전히 제거됨을 확인하였다. $scCO_2$/n-BA 공용매 시스템은 노광 PR과 미노광 PR 사이의 높은 선택성을 제공할 수 있으며, 네거티브 PR의 리소그래피 공정에서 높은 신뢰성을 부여할 것으로 기대된다.

• 한국재료학회지
• /
• 제26권3호
• /
• pp.109-116
• /
• 2016

To achieve the fabrication of high-quality Ag-coated Cu particles through a wet chemical process, we reported herein pretreatment conditions using an ammonium-based mixed solvent for the removal of a $Cu_2O$ layer on Cu particles that were oxidized in air for 1 hr at $200^{\circ}C$ or for 3 days at room temperature. Furthermore, we discussed the results of post-Ag plating with respect to removal level of the oxide layer. X-ray diffraction results revealed that the removal rate of the oxide layer is directly proportional to the concentration of the pretreatment solvent. With the results of Auger electron spectroscopy using oxidized Cu plates, the concentrations required to completely remove 50-nm-thick and 2-nm-thick oxides within 5 min were determined to be X2.5 and X0.13. However, the optimal concentrations in an actual Ag plating process using Cu powder increased to X0.4 and X0.5, respectively, because the oxidation in powder may be accelerated and the complete removal of oxide should be tuned to the thickest oxide layer among all the particles. Back-scattered electron images showed the formation of pure fine Ag particles instead of a uniform and smooth Ag coating in the Ag plating performed after incomplete removal of the oxide layer, indicating that the remaining oxide layer obstructs heterogeneous nucleation and plating by reduced Ag atoms.

• Bulletin of the Korean Chemical Society
• /
• 제33권10호
• /
• pp.3196-3202
• /
• 2012

Post-synthesis is used to synthesize organic hybrid inorganic mesoporous sieves. In this method, the activity and structure of the base sieve are crucial to obtain the definable hybrid materials. The chemical and physical properties of the base can be largely changed either by the final step of its synthesizing processes, by template removal which is accomplished with the oxidative thermal decomposition (burning) method or by solvent extraction method. In this paper we compared two methods for the post-synthesis of organic hybrid MCM-48. When the template was extracted with HCl/alcohol mixture, the final product showed larger pore size, larger pore volume and better crystallinity compared to the case of the thermal decomposition. The reactivity of the surface silanol group of template free MCM-48 was also checked with an alkylsilylation reagent $CH_2=CHSi(OC_2H_5)_3$. Raman and $^{29}Si$ NMR spectra of MCM-48 in the test reaction indicated that more of the organic group was grafted to the surface of the sample after the template was removed with the solvent extraction method. Direct synthesis of vinyl-MCM-48 was also investigated and its characteristics were compared with the case of post-synthesis. From the results, it was suggested that the structure and chemical reactivity can be maintained in the solvent extraction method and that organic grafting after the solvent extraction can be a good candidate to synthesize a definable hybrid porous material.

• Journal of Microbiology
• /
• 제38권3호
• /
• pp.187-191
• /
• 2000

A validation study was conducted to determine the efficacy of solvent/Detergent (S/D) inactivation and Q-Sepharose column chromatographic removal of the human immunodeficiency virus (HIV) during the manufacturing of a high purity antihemopilic factor VIII (GreenMono) from human plasma. S/D treatment using the organic solvent, tri (n-butyl) phosphate, and the detergent, Trition X-100, was a robust and effective step in eliminating HIV-1. The HIV-1 titer was reduced from an initial titer of 8.3 log10 TCID50 to undetectable levels within one minute of S/D treatment, HIV-1 was effectively partitioned form factor VIII during Q-Sepharose column chromatography with the log reduction factor of 4.1 . These results strongly assure the safety of GreenMono From HIV.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.3298-3303
• /
• 2014

자동차 폐범퍼를 재활용하기 위해서는 도장된 페인트를 효율적으로 제거하는 기술이 매우 중요하다. 현재까지 개발된 방법들은 환경오염을 유발할 수 있는 화학적 방법이 물리적 방법에 비해 도장 제거율이 높다고 알려져 있다. 이 연구에서는 물리적 제거법의 낮은 도막 제거율을 높이기 위하여 화학적 제거법과 물리적 제거법을 혼합하여 용매의 사용량을 줄이고 도막의 제거율을 높이는 방법을 시도하였다. 용매를 침지하는 과정에서 기계적인 교반이 도장 제거율을 높임을 확인하였고, 중간 매체로 고체입자를 혼합하였을 때 매우 높은 도장 제거율을 보임을 관찰하였다. 이로서 적절한 방법으로 화학적인 방법과 물리적인 방법을 혼합하면 용매의 양을 줄이면서 도장 제거율을 높일 수 있음을 확인하였다.