• 전기학회논문지
• /
• 제65권10호
• /
• pp.1639-1647
• /
• 2016

This paper deals with eddy current loss analysis of Slotless Double sided Cored type permanent magnet linear generator by using analytical method, space harmonic method. In order to calculate eddy current, this paper derives analytical solution by the Maxwell equation, magnetic vector potential, Faraday's law and a two-dimensional(2-D) cartesian coordinate system. First, we derived the armature reaction field distribution produced by armature wingding current. Second, by using derived armature reaction field solution, the analytical solution for eddy current density distribution are also obtained. Finally, the analytical solution for eddy current loss induced in permanent magnets(PMs) are derived by using equivalent, electrical resistance calculated from PMs volume and eddy current density distribution solution. The analytical result from space harmonic method are validated extensively by comparing with finite element method(FEM).

• 산업공학
• /
• 제23권3호
• /
• pp.257-263
• /
• 2010

Taguchi defined a good quality as 'A correspondence of product characteristic's expected value to the objective value satisfying the minimum variance condition.' For his good quality, he suggested Taguchi Method which is called Robust design which is irrelevant to the effect of these noise factors. Taguchi Method which has many success examples and which is used by many manufacturing industry. But Optimal solution of Taguchi Method is one among the experiments which is not optimal area of experiment point. On the other hand, Response Surface Method (RSM) which has advantage to find optimal solution area experiments points by approximate polynomial regression. But Optimal of RSM is depended on initial point and RSM can not use many factors because of a great many experiment. In this paper, we combine the Taguchi Method and the Response Surface Method with each advantage which is called Taguchi-RSM. Taguchi-RSM has two step, first step to find first solution by Taguchi Method, second step to find optimal solution by RSM with initial point as first step solution. We give example using catapults.

• 대한수학회논문집
• /
• 제14권4호
• /
• pp.833-842
• /
• 1999

In this paper, we construct a fully discrete solution of the incompressible Navier Stokes equations using implicit Runge kutta method. We prove the existence of the fully discrete solution.

• 대한수학회논문집
• /
• 제26권4호
• /
• pp.695-708
• /
• 2011

Based on the multiple-time-scale (MTS) method, a general formula has been presented for solving an n-th, n = 2, 3, ${\ldots}$, order ordinary differential equation with strong linear damping forces. Like the solution of the unified Krylov-Bogoliubov-Mitropolskii (KBM) method or the general Struble's method, the new solution covers the un-damped, under-damped and over-damped cases. The solutions are identical to those obtained by the unified KBM method and the general Struble's method. The technique is a new form of the classical MTS method. The formulation as well as the determination of the solution from the derived formula is very simple. The method is illustrated by several examples. The general MTS solution reduces to its classical form when the real parts of eigen-values of the unperturbed equation vanish.

• Steel and Composite Structures
• /
• 제25권2호
• /
• pp.127-139
• /
• 2017

In this paper, an exact analytical solution for simply supported sandwich plate which considers the permeation effect of adhesives is presented. The permeation layer is described as functionally graded material (FGM), the elastic modulus of which is assumed to be graded along the thickness following the exponential law. Based on the exact three-dimensional (3-D) elasticity theory, the solution of stresses and displacements for each layer is derived. By means of the recursive matrix method, the solution can be efficiently obtained for plates with many layers. The present solution obtained can be used as a benchmark to access other simplified solutions. The comparison study indicates that the finite element (FE) solution is close to the present one when the FGM layer in the FE model is divided into a series of homogeneous layers. However, the present method is more efficient than the FE method, with which the mesh division and computation are time-consuming. Moreover, the solution based on Kirchhoff-Love plate theory is greatly different from the present solution for thick plates. The influence of the thickness of the permeation layer on the stress and displacement fields of the sandwich plate is discussed in detail. It is indicated that the permeation layer can effectively relieve the discontinuity stress at the interface.

• Journal of applied mathematics & informatics
• /
• 제29권1_2호
• /
• pp.55-60
• /
• 2011

The aim of the paper is to apply Homotopy Perturbation Method (HPM) for the solution of a nonlinear fractional differential equation. Finally, the solution obtained by the Homotopy perturbation method has been numerically evaluated and presented in the form of tables and then compared with those obtained by truncated series method. A good agreement of the results is observed.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.312-319
• /
• 2007

The solution of the power flow is one of the most important problems in electrical power systems. These traditional methods such as Gauss-Seidel method and Newton-Raphson (NR) method have had drawbacks up to now such as initial values, abnormal operating solutions and divergences in heavy loads. In order to overcome theses problems, the power flow solution incorporating genetic algorithm (GA) is introduced in this paper. General operator of genetic algorithm, arithmetic crossover, and non-uniform mutation operator of GA are suggested to solve the power flow problem. While abnormal solution cannot be obtained by a NR method, multiple power flow solution can be obtained by a GA method. With a heavy load, both normal solution and abnormal solution can be obtained by a proposed method. In this paper, a floating number representation instead of the binary number representation is introduced for accuracy. Simulation results have been compared with traditional methods.

• 대한교통학회지
• /
• 제9권2호
• /
• pp.121-126
• /
• 1991

Wilson made an importent contribution to develop a trip distribution model with the general form of gravity model which is an entropy maximization program. Also Wilson suggested a technique which is called the "iterative balancing method" for soving the model. This te-chnique however is not stable to find solution because it is a heuristic method and sometimes does not converge to the correct solution. In this paper a new solution method using a numerical method for solving the non-linear simultaneous equation system is developed and evaluated in both computers VAX 8700 and PC/AT 286 The result of this method and Wilson's method are compared with each other. Wilson's method resulted in inferior solutions measured by the final norm of residuals.

• 대한수학회지
• /
• 제51권6호
• /
• pp.1123-1139
• /
• 2014

In this work, we investigate the existence of the extremal solutions for a class of fractional partial differential equations with order 1 < ${\alpha}$ < 2 by upper and lower solution method. Using the theory of Hausdorff measure of noncompactness, a series of results about the solutions to such differential equations is obtained.

• Nuclear Engineering and Technology
• /
• 제52권6호
• /
• pp.1340-1346
• /
• 2020

The aim of this paper is to explore the 8th-order Adams-Bashforth-Moulton (ABM8) method in the solution of the point reactor kinetics equations. The numerical experiment considers feedback reactivity by Doppler effects, and insertions of reactivity. The Doppler effects is approximated with an adiabatic nuclear reactor that is a typical approximation. The numerical results were compared and discussed with several solution methods. The CATS method was used as a benchmark method. According with the numerical experiments results, the ABM8 method can be considered as one of the main solution method for changes reactivity relatively large.