• Journal of Conservation Science
• /
• v.23
• /
• pp.53-65
• /
• 2008

This research investigated and analyzed the structure and material feature of the wall behind the Buddha of main temple in An-dong Bongjeonsa through applying the natural scientific method, in order to closely examine its production technique. As a result of the research, the structural and material feature of the wall has been clarified and its production technique applied to the structure has been understood in a comprehensive sense. The target sample basically adopted the two-layer wall system, which showed a symmetric structure to the center made with the wooden material, and is estimated to follow the structural tendency of a general wall which is organized with the first layer, the midterm layer, and the painting wall layer. Each layer formed by the production procedure showed difference in the material and production method according to its characteristics and roles. And it was identified that, in general, the higher a layer lies, the finer grains it has. Combination of the main materials and the additives, used for the wall forming, was presumed to contribute to improving its durability and conservativeness. Also interaction between the materials generating the conservativeness and the producer's technical effect seemed to fortify solidity of the wall.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.12
• /
• pp.76-82
• /
• 2005

An experimental study on an axial-type micro turbine which consists of maximum 6 stages is conducted to measure aerodynamic characteristics on each stage. This turbine has a 2.0 flow coefficient, 3.25 loading coefficient and 25.8mm mean diameter. The solidity of stators and rotors is within a 0.67~0.75, and the off-design performance is measured by changing the load after adjusting the mass flowrate and the total pressure to constant at inlet. A maximum specific output power of 2kW/kg/sec is obtained in one stage, but the increment of the specific output power with increasing stages is alleviated. In case of torque, the increment of the torque maintains to constant at low RPM region, but its increment become dull at high RPM region. The efficiency of the micro turbine becomes low because the tip gap effect is great due to the small blade, but it could be improved by increasing the stages.

• The Journal of the Korea Contents Association
• /
• v.14 no.6
• /
• pp.11-25
• /
• 2014

In strong dramas, pot, character, and theme, three basic elements in dramatic structure, are effectively integrated forwards the same dramatic idea. Plot might be considered as the most important element to combine events and character. However, at some point of the script, the writer becomes less interested in the mechanics of the plot, and the characters take over, because audiences remember the characters or the situations more clearly than the plot. Therefore, the workshop of dramatic structure would be successful when it starts from excogitating the character and the situation, by improvising 'voices' of characters, building 'back story', and reconstructing 'outline from the antagonist's view'. With these exercises, the writer and the director understand the mechanics of dramatic plotting by characterization, which include the choice of the protagonist, and the description of plausible actions and the theme, and they consequentially find the way to obtain solidity and plausibility in the scenes.

• Journal of The Korean Association For Science Education
• /
• v.1 no.1
• /
• pp.73-88
• /
• 1978

The survey is intended to improve science education by the analysis of problems produced in the following nine aspects (objectives, contents, materials, inquring methods, teaching methods, teachers, children, evalutions, admininative supports) during the past five years often the revision of new science curriculum. 1. View for science education. 1) The teacher's and children's view for science education can be seen renewed, being different from the old one. 2) Inquring method in learning and teaching began to take firm root and children came to know that it is the only way to study science. 3) Writers think that the new science education has stepped into the stage of being fixed to a considerable degree. 2. The aspect of administrative policy. 1) The amount of materials in possession is small and the present materials are lacking in solidity and precision. 2) Class room teacher's over load with miscellaneous things is a difficult problem to solve. 3) The shortage of the printed materials and books for children and teachers has an influence on the development of inquring method. 4) It causes cramming to examine all children at the same time by paper test. 5) It is more desirable to appoint qualified teacher only for science teaching. 3. Contents of science curriculum. 1) In current science textbooks. There can be found some contents which are difficult for teachers to understand and not in accordance with the reality of Korea. Therefore, it is imperative that contents of science textbooks should be reexamined. 2) As it is hard to teach concepts of reciprocal action and to prepare materials with teaching of the system of biological concepts, the teaching of contents is likely to be a cramming. 4. The aspect of in-service education. 1) It is obsolutely predominant reation that in-service education is making a great contribution to class room teaching. 2) As adiministrators' policy for science education has a great effect, in-service education for their enlightenment is needed.

• Journal of Plant Biotechnology
• /
• v.6 no.2
• /
• pp.97-102
• /
• 2004

This study was carried out to establish The regeneration of healthy seedlings from the nodal segment culture of Chinese yam (Dioscorea opposita cv. Danma), cultivated in Korea. Different explants such as leaves, petioles, roots and nodal pieces, excised from the in vitro grown seedlings of Chinese yam, were cultured on MS medium supplemented with various combinations of growth regulators. All the growth regulators used induced plantlet regeneration from the nodal segments at a high frequency, while there was no induction of shoot or callus from leaf, petiole or root tissues. The medium supplemented with 0.01mg/L NAA, 0.5mg/L BA, 0.5-1.0mg/L kinetin and without plant growth regulator was effective for shoot development of buds from the nodal segment culture. The concentration of BA and NAA was an important factor in the bud induction of buds from the nodal segments of Chinese yam. Nodal segments cultured on the medium containing 1.0mg/L NAA and 0.5-1.0mg/L BA gave the best response to bud formation. The addition of GA$_3$ to the culture medium suppressed shoot induction and growth, while it increased microtuber formation. The shoot growth and microtuber formation were also affected by medium strength and solidity. The MS basal medium containing 1 g/L gelrite was suitable for microtuber formation from the nodal segment of Chinese yam.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.10 s.103
• /
• pp.1177-1185
• /
• 2005

This paper investigates the noise radiated by a cascade of flat-plate airfoils interacting with homogeneous, isotropic turbulence. At frequencies above the critical frequency, all wavenumber components of turbulence excite propagating cascade modes, and cascade effects are shown to be relatively weak. In this frequency range, acoustic power was shown to be approximately proportional to the number of blades. Based on this finding at high frequencies, an approximate expression is derived for the power spectrum that is valid above the critical frequency and which is in excellent agreement with the exact expression for the broadband power spectrum. The approximate expression shows explicitly that the acoustic Power above the critical frequency is proportional to the blade number, independent of the solidity, and varies with frequency as ${\phi}_{ww}(\omega/W$), where ${\phi}_{ww}$ is the wavenumber spectrum of the turbulence velocity and W is mean-flow speed. The formulation is used to perform a parametric study on the effects on the power spectrum of the blade number stagger angle, gap-chord ratio and Mach number. The theory is also shown to provide a close fit to the measured spectrum of rotor-stator interaction when the mean square turbulence velocity and length-scale are chosen appropriately.

• Korean journal of food and cookery science
• /
• v.29 no.3
• /
• pp.223-231
• /
• 2013

This study was carried out for the purpose of inquiring into the effects on shelf-life, quality characteristics, and antioxidant activities, of Majakgwa. This study also regards to the use fermented turmeric powder at varying concentrations in the recipe. The proximate composition of fermented turmeric powder, crude fat, carbohydrate, crude protein, and crude ash was decreased. Viewed division compared to the freeze-dried turmeric curcumin content was increased during fermentation due to the increase of mineral content. With an increased of the amount of fermented turmeric powder used in Majakgwa recipes, the pH of the dough was higher than that of the controlled group. The acid value of Maejakgwa was lowered down, and most effectively controled when adding Turmeric power by 3~6%, and the peroxide value shows high antioxidant ability from the initial storagr period when adding 6%. TBA value appears to have the highest antioxidant ability, when adding 6%, showing lower increasing rate than that of sample group added 0~3% Turmeric powder. When added 9% or more, however, it shows higher TBA value comparing with normal Maejakgwa, the reference group, which indicates on the contrary that the antioxidant ability is lowering. The bitter taste, exterior color, incense of Turmeric, solidity, and crispy level of Maejakgwa with fermented Turmeric powder have been increased significantly as per increase of fermented Turmeric powder, and the sample group added with 9% have shown the best result in the overall taste level. It is anticipated that adding 6~9% of fermented Turmeric powder can increase the storage capability to give the best taste level and effective antioxidant ability by minimizing the off-flavor and bitter taste, through the research as above, which would be the most appropriate blending ratio of Turmeric powder for producing Maejakgwa.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.12
• /
• pp.1360-1366
• /
• 2008

This paper proposes a printed yagi-antenna available at 2.45 GHz, for the remote-management system of the underground equipment. To improve the solidity and waterproof property, the proposed antenna is coated with bakelite. The manufactured antenna is operated at $2.15{\sim}2.52\;GHz$, whose gain measures 10 dBi. These results are a little different from those of the simulated antenna, but the trend is totally similar. Developed antenna is expected to be useful in the underground facility.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.3
• /
• pp.432-438
• /
• 2002

In order to design and analyze the performance of an axial-flow pump it is necessary to know the flow deviation, deflection angle and pressure loss coefficient as a function of the angle of incidence for the hydrofoil section in use. Because such functions are unique to the particular section, however, general correlation formulae are not available for the multitude of hydrofoil profiles, and such functions must be generated by either experiment or numerical simulation for the given or selected hydrofoil section. The purpose of present study is to generate design correlations for hydrofoils with double circular arc (DCA) camber by numerical analysis using a commercial code, FLUENT. The cascade configuration is determined by a combination of the inlet blade angle, blade thickness, camber angle, and cascade solidity, and a total of 90 cascade configurations are analyzed in this study. The inlet Reynolds number based on the chord and the inlet absolute velocity is fixed at 5${\times}$10$\^$5/. Design correlations are formulated, based on the data at the incidence angle of minimum total pressure loss. The correlations obtained in this way show good agreement with the experiment data collected at NASA with DCA hydrofoils.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1721-1729
• /
• 2001

The performance of gas turbines is decreased as their operating hours increase. Fouling in the axial compressor is one of main reasons for the performance degradation of gas turbine. Airborne particles entering with air at the inlet into compressor adhere to the blade surface and result in the change of the blade shape, which is closely and sensitively related to the compressor performance. It is difficult to exactly analyze the mechanism of the compressor fouling because the growing process of the fouling is very slow and the dimension of the fouled depth on the blade surface is very small compared with blade dimensions. In this study, an improved analytic method to predict the motion of particles in compressor cascades and their deposition onto blade is proposed. Simulations using proposed method and their comparison with field data demonstrate the feasibility of the model. It if found that some important parameters such as chord length, solidity and number of stages, which represent the characteristics of compressor geometry, are closely related to the fouling phenomena. And, the particle sloe and patterns of their distributions are also Important factors to predict the fouling phenomena in the axial compressor of the gas turbine.