• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.1
• /
• pp.13-19
• /
• 2015

Among the various possible factors affecting the Minority Carrier Life Time (MCLT) of the mc-Si crystal, dislocations formed during the cooling period after solidification were found to be a major element. It was confirmed that other defects such as grain boundary or twin boundary were not determinative defects affecting the MCLT because most of these defects seemed to be formed during the solidification period. With a measurement of total thickness variation (TTV) and bow of the silicon wafers, it was found that residual stress remaining in the mc-Si crystal might be another major factor affecting the MCLT. Thus, it is expected that better quality of mc-Si can be grown when the cooling process right after solidification is carried out as slow as possible.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.11 no.1
• /
• pp.462-473
• /
• 2019

The effects of the location and dimension of the gate, location, and volume of the feeder, application of a chill, chill volume, and heating method of the feeder with respect to the effect of the mold-designing technologies on the defect status of the products are described. It is possible to increase the solidification time of the feeder by heating feeder. Furthermore, the pressure generated from the feeder is imposed on a product, and this decreases the generation of shrinkage porosities. In this study, two types of gating and feeding systems had been proposed: the bottom L-type junctions and the top L-type junctions. Additionally, solidification behaviors, such as solidification time, shrinkage porosities, weight percentage of chill system to product, hot spot, and solidification time ratio (=Solidification time of feeder/solidification time of product), are extensively analyzed by using commercial casting simulation software. Based on the solidification behaviors, reasonable mold design, feeding system, critical feeder heating temperature, and solidification time ratios are proposed in the sand casting process for the fabrication of carrier housing in order to reduce the casting defects and to increase the recovery rate.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.6
• /
• pp.232-236
• /
• 2008

Recently the shortage of silicon resources especially for poly-silicon of purity higher than 99.9999% leads to search for the more cheap and quick synthesizing routes for silicon feedstock. In order to solve this situation, we investigated the purification process of metallurgical grade (MG) silicon of purity around 99% by the acid leaching and following the unidirectional solidification. MG-Si lumps are pulverized with a planetary mill, and then leached with HCl/$HNO_3$/HF acid solution. As a result, the concentration of metal impurities including Al, Fe, Ca, Mn, etc. decreased dramatically. This process led to silicon content higher than 99.99%. The purified silicon powders were compacted and have been melted and uni-directionally solidified with heat exchange method (HEM) furnace. The properties of multicrystalline silicon ingots were specific resistance of $0.3{\Omega}{\cdot}cm$ and minority carrier life time (MCLT) of $3.8{\mu}{\cdot}sec$.

• Journal of Powder Materials
• /
• v.30 no.6
• /
• pp.493-501
• /
• 2023

This study aimed to develop a solid self-nanoemulsifying drug delivery system (solid-SNEDDS) to enhance the formulation of ketoconazole (KTZ), a BCS Class II drug with poor solubility. Ketoconazole, which is insoluble above pH 3, requires solubilization for effective delivery. This SNEDDS comprises oil, surfactant, and co-surfactant, which spontaneously emulsify in the gastrointestinal tract environment to form nanoemulsions with droplet sizes less than 100 nm. The optimal SNE-vehicle composition of oleic acid, TPGS, and PEG 400 at a 10:80:10 weight ratio was determined based on the smallest droplet size achieved. This composition was used to prepare liquid SNEDDS containing ketoconazole. The droplet size and polydispersity index (PDI) of the resulting liquid SNEDDS were analyzed. Subsequently, solid-SNEDDS was fabricated using a spray-drying method with solidifying carriers such as silicon dioxide, crospovidone, and magnesium alumetasilicate. The physicochemical properties of the solid-SNEDDS were characterized by scanning electron microscopy and powder X-ray diffraction, and its solubility, droplet size, and PDI were evaluated. In particular, the solid-SNEDDS containing ketoconazole and crospovidone in a 2:1 weight ratio exhibited significantly enhanced solubility, highlighting its potential for improved medication adherence and dissolution rates.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.482-489
• /
• 2020

This study conducted a prototype development and evaluation by performing die-casting mold design, mold manufacturing, and injection condition optimization based on flow and solidification analysis to meet the needs of the coupling parts produced by die casting. Through flow analysis, the injection conditions suitable for 100% filling in the cavity were found to be a molten metal temperature of 670 ℃, injection speed of 1.164 m/s, and filling pressure of 6.324~18.77 MPa. In addition, solidification close to 100 % occurred in all four cavities when the solidification rate was 69.47 %. A defect inspection on the surface and inside the product revealed defects, such as poor molding and pores. In addition, the dimensions of the injected product were within the target tolerance and showed good results. Through the feedback of the results of flow and solidification analysis, it was possible to optimize the mold design, and the injection optimization conditions were confirmed to be a total cycle time of approximately 6.5 seconds. Good quality carrier parts with an average surface hardness of approximately 45 mm from the gate measured at 97.48(Hv) could be produced.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.19.2-19.2
• /
• 2011

ZnO nanowires have been fabricated by vapor-liquid-solidification with hot-walled pulsed laser deposition method. The diameter of ZnO nanowire has been systematically controlled simply by changing the thickness of Au catalyst. Field effect transistors with different diameter have been fabricated by using photolithography and e-beam lithography. The threshold voltage of ZnO nanowire FET showed enhanced mode and depleted mode depending on the diameter of ZnO nanowires. This is mainly due to the change of the carrier concentration depending on the size of nanowires. We have fabricated ZnO nanowire inverters using nanowire FETs. This simple method to fabricate ZnO nano-inverter will be useful to open the possibility of ZnO nanoelectronic applications.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1416-1417
• /
• 2011

킹크효과를 억제할 수 있는 새로운 f-모양 트리플게이트 구조를 가지는 다결정실리콘 박막트랜지스터는 추가적인 공정과정 없이 제안 및 제작되었다. 이러한 다결정실리콘 박막트랜지스터의 채널에는 순차적인 횡방향 고체화(Sequential Lateral Solidification, SLS)나 CW 레이져 횡방향 결정화(CW laser Lateral Crystallization, CLC) 등과 같은 방법으로 제작된 횡방향으로 성장시킨 그레인이 있다. 이 소자의 전체적인 전류흐름은 횡방향으로 성장시킨 그레인 경계에 강력하게 영향을 받는다. f-모양 트리플게이트에는 횡방향으로 성장시킨 그레인과 평행한 방향으로 위치한 채널, 그리고 수직인 방향으로 위치한 채널이 있다. 이 소자는 f-모양 게이트 구조에서의 비대칭 이동도를 이용하여 다결정실리콘 박막트랜지스터의 킹크효과를 효과적으로 억제시킬 수 있다는 사실을 실험과 시뮬레이션을 통해 검증되었다. 우리의 실험 결과는 이 논문에서 제안된 f-모양 트리플게이트 박막트랜지스터가 기존의 박막트랜지스터와 비교할 때 더 효과적으로 킹크 효과를 감소시킬 수 있다는 것을 보여주었다. 또한 고온 캐리어 스트레스 조건에서의 신뢰성도 개선할 수 있음이 확인되었다.

• Economic and Environmental Geology
• /
• v.23 no.1
• /
• pp.59-71
• /
• 1990

Magnetic anisotropy of a total of 213 independently oriented Tertiary rock samples from Pohang-Ulsan area has been studied. The sampled strata comprise basalts, tuffs and black shale, and range in age from Eocene to Miocene. The previous palaeomagnetic studies indicate that their magnetic carrier minerals are titanomagnetites. Among 23 sampled sites, 11 sites were found to preserve magnetic load foliation parallel to the bedding plane caused by the Iithostatic load of the overlying strata. Other 4 sites showed magnetic lineation indicating the flow direction of lava and tuffs. The remaining 8 sites revealed the magnetic tectonic foliation nearly vertical to the bedding plane. This magnetic foliation is interpreted to be generated by tectonic compression which acted nearly horizontally during the solidification stage of the strata. The compression directions deduced from the tectonic foliation of the 8 sites can be grouped into internally very consistent two group: a N-S trending one and the other WNW-ESE trending one. It is interpreted that the former N-S compression was associated with the N-S spreading of the East Sea(Sea of Japan) and the dextral strike-slip movement of the Yangsan-Ulsan fault system. The latter WNW-ESE compression is interpreted to represent the folding and reverse faulting activity in the Korean and Tsushima straits during middle/late Miocene times.

• Journal of Environmental Impact Assessment
• /
• v.21 no.1
• /
• pp.63-69
• /
• 2012

Sediment has been increasingly acknowledged as a carrier in water system and an available contamination. For this reason, dredging of sediment in reservoir to remediate water quality and secure storage capacity is conducted annually. However, disposal of numerous dredged sediment is necessary as a secondary problem. Currently, in Korea, dredged sediment is classified as waste to be reclamated or recycled into sandy soil, however, they are still in trouble because of spacial and environmental problem. Therefore, rather than simple disposal or reuse into sandy soil, it is necessary to research on method to manage main cause of pollution and increase the value as a resource. In this study, we intend to develop a recycle technology for numerous dredged sediment produced by dredging in deteriorated reservoirs using solidificator (stabilizer). To achieve this, we will consider utilization of dredged sediment and evaluation of use possibility as natural recycle by analysis the characteristics of soil-solidificator mixture in terms of physicochemical properties and the mixing ratio between sediment and solidificator.

• Journal of Powder Materials
• /
• v.24 no.2
• /
• pp.115-121
• /
• 2017

In this work, p-type Bi-Sb-Te alloys powders are prepared using gas atomization, a mass production powder preparation method involving rapid solidification. To study the effect of the sintering temperature on the microstructure and thermoelectric properties, gas-atomized powders are consolidated at different temperatures (623, 703, and 743 K) using spark plasma sintering. The crystal structures of the gas-atomized powders and sintered bulks are identified using an X-ray diffraction technique. Texture analysis by electron backscatter diffraction reveals that the grains are randomly oriented in the entire matrix, and no preferred orientation in any unique direction is observed. The hardness values decrease with increasing sintering temperature owing to a decrease in grain size. The conductivity increases gradually with increasing sintering temperature, whereas the Seebeck coefficient decreases owing to increases in the carrier mobility with grain size. The lowest thermal conductivity is obtained for the bulk sintered at a low temperature (603 K), mainly because of its fine-grained microstructure. A peak ZT of 1.06 is achieved for the sample sintered at 703 K owing to its moderate electrical conductivity and sustainable thermal conductivity.