• 전기화학회지
• /
• 제25권3호
• /
• pp.95-104
• /
• 2022

상용 리튬이온전지의 에너지밀도 한계와 안전성 이슈로 불연성 전고체전지 개발이 현안이 되고 있다. 특히, 전기자동차를 위한 차세대 이차전지에 황화물 고체전해질의 적용 가능성이 높아지면서, 고체전해질의 대량생산과 저가격화를 위한 노력 또한 활발해 진행되고 있다. 황화물 고체전해질에 관한 현재까지의 대부분의 연구에서는 조성 및 불순물 제어가 용이하고 균질화와 열처리 시간을 줄일 수 있는 고에너지 기계적 밀링법을 이용하여 열역학적으로 안정한 상 및 준-안정한 상에 대한 탐색을 수행해 왔다. 이를 통해 액체 전해질의 리튬이온전도도를 능가하는 다양한 황화물 고체전해질이 보고되어, 고에너지밀도 고안전성 전고체전지 구현에 대한 기대가 커지고 있다. 그러나, 고에너지 기계적 밀링법은 대량생산에 따른 동일 물성 획득이 쉽지 않고, 입도나 형상 제어가 용이하지 않으며, 분쇄-분급 과정에서 물성의 열화가 발생하는 단점이 알려져 있다. 이에 비해 대량생산과 저가격화에 유리한 습식 합성기술은 아직 다양한 고체전해질 제조에 응용되지는 못하고 있다. 습식 합성기술에서는 입자형, 용액형, 또는 혼합형으로 전구체를 합성하고 용매를 제거한 후 열처리하는 공정을 통해 제조하고 있으나, 전구체의 형성 메커니즘에 대한 명확한 규명도 아직 이루어지지 않고 있다. 본 총설에서는 용매 내 원료들의 반응 메커니즘을 중심으로 한 황화물 고체전해질의 습식 합성기술 동향을 살펴보고자 한다.

• Mycobiology
• /
• 제51권3호
• /
• pp.157-163
• /
• 2023

Cordyceps fumosorosea is an important species in the genus of Cordyceps, containing a variety of bioactive compounds, including fumosorinone (FU). This study was a ground-breaking assessment of FU levels in liquid and solid cultures. The present study focused on the impacts of solid-state fermentation (SSF) using solid substrates (wheat, oat, and rice), as well as the effects of fermentation parameters (pH, temperature, and incubation period), on the generation of FU. All the fermentation parameters had significant effects on the synthesis of FU. In a study of 25 ℃, 5.5 pH, and 21 days of incubation period combinations calculated -to give maximal FU production, it was found that the optimal values were 25 ℃, 5.5 pH, and 21 days, respectively. In a solid substrate medium culture, FU could be produced from SSF. At 30 days, a medium composed of rice yielded the most FU (798.50 mg/L), followed by a medium composed of wheat and oats (640.50 and 450.50 mg/L), respectively. An efficient method for increasing FU production on a large scale could be found in this approach. The results of this study might have multiple applications in different industrial fermentation processes.

• 고무기술
• /
• 제13권1호
• /
• pp.1-9
• /
• 2012

Click chemistry had enjoyed a wealthy decade after it was introduced by K.B.Sharpless and his co-worker on 2001. Since there is no optimized method for synthesis of click polymer, therefore, this paper introduced three click reaction methods such as catalyst, non-catalyst and azide-end capping for fluorene-based functional click polymers. The obtained polymers have reasonable molecular weight with narrow PDI. The polymers are thermally stable and almost emitted blue light emission. The synthesized fluorene-based functional click polymers were characterized to compare the effect of click reaction methods on polymer electro-optical properties as well as device performance on quasi-solid-state dye sensitized solar cells (DSSCs) applications. The DSSCs with configuration of $SnO_2:F/TiO_2/N719$ dye/quasi-solid-state electrolyte/Pt devices were fabricated using these click polymers as a solid-state electrolyte components. Among the devices, the catalyzed click polymer composed device exhibited a high power conversion efficiency of 4.62% under AM 1.5G illumination ($100mW/cm^2$).These click polymers are promising materials in device application and $Cu^I$-catalyst 1, 3-dipolar cycloaddition click reaction is an efficient synthetic methodology.

• 한국세라믹학회지
• /
• 제43권11호
• /
• pp.680-687
• /
• 2006

An overview is given to optimize the solid state processes toward phase pure and well-crystallized fine particulates of mixed oxides, serving as electroceramic materials in various genres. Elevation of the reactivity and preservation of stoichiometry of the starting mixture are of universal importance. Mechanical activation is versatile for these purposes, particularly when an oxygen atom as a hinge promotes formation of hetero-bridging bonds between dissimilar cationic species prior to calcination. Case studies carried out recently in the author's laboratory are displayed and compared for ferroelectric materials, i.e. $PbMg_{1/3}Nb_{2/3}O_3$ $xPbTiO_3$(PMN-PT), $(1-y)Pb(Zn_xMg{1-x})_{1/3}$ $yNb_{2/3}O_3$ (PZN-PMN), $BaBi_2Ta_2O_9$ (BBT), $Ba(Mg_{1/3}Ta_{2/3})O_3$ (BMT), and ferromagnetics, i.e. M-, Y-, and Z-phases of Ba-hexaferrites.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.350-351
• /
• 2007

The $LiFePO_4$ as cathode materials for lithium ion batteries was synthesized by the solid-state reaction using ballmiller and employed one step heat treatment at $650^{\circ}C$. The influence of the heating time on the structure, particle size and cycle performance was investigated. $LiFePO_4$ heated at $650^{\circ}C$ for 3 h exhibited higher discharge capacity of 140 mAh/g and excellent cycle performance.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2001년도 추계학술강연 및 발표대회
• /
• pp.13-13
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• 제21권10호
• /
• pp.989-994
• /
• 2000

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3835-3839
• /
• 2013

A new synthesis route for Pt nanoparticles by direct electrochemical reduction of a solid-state Pt ion precursor ($K_2PtCl_6$) is demonstrated. Solid $K_2PtCl_6$-supported polyethyleneimine (PEI) coatings on the surface of glassy carbon electrode were prepared by simple mixing of solid $K_2PtCl_6$ into a 1.0% PEI solution. The potential cycling or a constant potential in a PBS (pH 7.4) medium were applied to reduce the solid $K_2PtCl_6$ precursor. The reduction of Pt(IV) began at around -0.2 V and the reduction potential was ca. -0.4 V. A steady state current was achieved after 10 potential cycling scans, indicating that continuous formation of Pt nanoparticles by electrochemical reduction occurred for up to 10 cycles. After applying the reduction potential of -0.6 V for 300 s, Pt nanoparticles with diameters ranging from $0.02-0.5{\mu}m$ were observed, with an even distribution over the entire glassy carbon electrode surface. Characteristics of the Pt nanoparticles, including their performance in electrochemical reduction of $H_2O_2$ are examined. A distinct reduction peak observed at about -0.20 V was due to the electrocatalytic reduction of $H_2O_2$ by Pt nanoparticles. From the calibration plot, the linear range for $H_2O_2$ detection was 0.1-2.0 mM and the detection limit for $H_2O_2$ was found to be 0.05 mM.

• Archives of Pharmacal Research
• /
• 제28권7호
• /
• pp.756-760
• /
• 2005

Polyene macrolide amphotericin B (AmB) is the drug of choice for the treatment of disseminated fungal infections. However, because of its pronounced side effects, the drug has limited applicability. There are few interesting reports, which state that co-administration of the drug with homo-peptide of polyaspartic acid reduces the side effects of the drug. In our present study, an approach has been made to systematically synthesize low molecular weight heteropeptides consisting of L-aspartic acid and its derivative. It was hypothesized that such heteropeptides will reduce the toxic side effects of the drug by facile hydrophobic binding between the polymer and the drug. We have employed the strategy of solid phase peptide synthesis (SPPS) to synthesize low molecular weight hetero-peptides by using L-aspartic acid and benzyl-L-aspartic acid to induce the hydrophobic binding between the peptide and the drug. In future, the proposed methodology can be employed to tailor other polypeptides substituted with benzyl groups to reduce the nephrotoxicity of AmB.

• Journal of Electrochemical Science and Technology
• /
• 제11권4호
• /
• pp.352-360
• /
• 2020

Lithium cobalt oxide (LiCoO₂, LCO) has been widely used as a cathode material for Li-ion batteries (LIBs) owing to its excellent electrochemical performance and highly reproducible synthesis even with mass production. To improve the energy density of the LIBs for their deployment in electro-mobility, the full capacity and voltage of the cathode materials need to exploited, especially by operating them at a higher voltage. Herein, we doped LCO with divalent calcium-ion (Ca²⁺) to stabilize its layered structure during the batteries' operation. The Ca-doped LCO was synthesized by two different routes, namely solid-state and co-precipitation methods, which led to different average particle sizes and levels of dopant's homogeneity. Of these two, the solid-state synthesis resulted in smaller particles with a better homogeneity of the dopant, which led to better electrochemical performance, specifically when operated at a high voltage of 4.5 V. Electrochemical simulations based on a single particle model provided theoretical corroboration for the positive effects of the reduced particle size on the higher rate capability.