• Journal of Radiation Protection and Research
• /
• v.16 no.2
• /
• pp.27-39
• /
• 1991

The diffusion of Sr-85, Cs-137, Co-60 and Am-241 in compacted domestic bentonite was studied, using a diffusion cell unit in which diffusion took place axially from the center of cylindrical bentonite sample body. The effects of compaction density and heat-treated bentonite on diffusion were analysed. And the diffusion mechanism of radionuclide was also analysed by evaluating the measured diffusivity of anion Cl-36. The apparent diffusivities obtained for Sr-85, Cs-137, Co-60 and Am-241 were $l.07{\times}10^{-11},\;6.705{\times}10^{-13},\;l.226{\times}10^{-13}\;and\; l.310{\times}10^{-14}m^2/sec$, respectively. When the as-pressed density of bentonite increased from $1.8\;to\;2.0g/cm^3$, the apparent diffusivity of Cs-137 decreased by quarter. In the case of bentonite heat-treated to $150^{\circ}C$, no significant change in diffusivity was observed, which showed the possibility that the domestic bentonite could be used as a chemical barrier to retard the radionuclide migration at below $150^{\circ}C$. From the calculated pore and surface diffusivity, the surface diffusion due to the concentration gradient of radionuclide sorbed on the solid phase was found to dominate greatly in total transport process.

• Journal of the Korean Magnetics Society
• /
• v.22 no.2
• /
• pp.37-41
• /
• 2012

The Ag nanoparticles attached $La_{0.7}Sr_{0.3}Co_{0.3}Fe_{0.7}O_{3-{\delta}}$ (LSCF) perovskites were prepared by plasma method. The Ag nanoparticles with size of several nanometers deposited from the Ag target were coated on the surface of LSCF powders with size range from 0.2 to 3 ${\mu}m$. The agglomeration of Ag particles annealed at $800^{\circ}C$ under inert gas of Ar were rarely observed. The inter-diffusion between surface Ag and core LSCF is effectively strong to prevent aggregation of Ag nanoparticles. The wave number of FT-IR spectra for LSCF were largely shifted as the concentration of Ag on LSCF up to 2.11 wt.%. The ionic states of irons in LSCF were measured by M$\ddot{o}$ssbauer spectroscopy. The small amount of $Fe^{4+}$ ions are converted to $Fe^{3+}$ ions after Ag nanopartcles were coated on LSCF.

• Food Science and Preservation
• /
• v.13 no.1
• /
• pp.71-76
• /
• 2006

We monitored the characteristics of soybean hydrolysate prepared under various hydrolysis condition using response surface methodology. The yield was affected by protease content but 1be effect of hydrolysis time to yield gradually increased at over $0.4\%$ of protease, while the $R^2$ of polynomial equation was 0.978 (p<0.01). The soluble solid enlarged by increase of both variables and the $R^2$ of polynomial equation was 0.954 (p<0.01). The degree of hydrolysis was affected by protease content at low (under $0.4\%$) protease and maximized at $0.57\%$ protease and 5.49 hrs. The $R^2$ of polynomial equation for the degree of hydrolysis was 0.916 (P<0.05). The calcium intolerance capacity showed similar pattern like yield but the effect of hydrolysis time was rapidly increased at over $0.4\%$ protease. The $R^2$ of polynomial equation for calcium intolerance capacity was 0.932 (p<0.05). The total phenolic compounds increased in proportion to protease content and hydrolysis time, while the $R^2$ of polynomial equation was 0.920 (p<0.05). According to the results of this study, the optimal conditions for soybean hydrolysis were predicted to be $0.51\~0.66\%$ of protease and $6.5\~9.0\;hrs$, and the predicted values and actual values of each response variable were similar to each other when the hydrolysis was performed at a random point within the optimal range.

• Journal of Life Science
• /
• v.13 no.2
• /
• pp.184-190
• /
• 2003

Myxococcus xanthus is a Gram negative, rod-shaped, soil bacterium that displays a social behaviors, and multicellular development upon nutrient deprivation. The csgA gene encoding a cell surface protein is essential for developmental behaviors including rippling, aggregation, fruiting body formation and sporulation. csgA mutants show normal vegetative growth, but lack all these developmental phenotypes. Expression of the CsgA (C-signal) specific genes are eliminated or dramatically reduced in csgA mutants. In order to identify components of C-signal transduction pathway, second site mutations were introduced into csgA mutants and were identified which can fully or partially restore development of csgA mutants (Rhie, H. G. et. al. 1989. J. Bacteriol. 171, 3268-3276). One of such csgA suppressor mutations, socD500 restores only sporulation to csgA mutants at 15$^{\circ}C$. The socD500 mutaion however eliminates the three basic developmental requirements, starvation, high cell density and a solid surface. Only sporulation, not accompanied with fruiting body formation is induced simply by shifting the temperature of vegetatively growing cells from $32^{\circ}C$ to $15^{\circ}C$. Spores induced by socD500 mutation is not as thick as that of wild-type fruiting body. In socD500 genetic background, two of ten C-signal dependent genes, $\Omega$DK4506 and $\Omega$DK4406 are more highly expressed in growing cells at $15^{\circ}C$. These results indicate that the socD500 mutation may be partly involved in the regulation of expression of two C-signal dependent genes and genes for sporulation in this transduction pathway.

• Economic and Environmental Geology
• /
• v.42 no.5
• /
• pp.479-486
• /
• 2009

In natural environments, manganese (Mn) exists in the valence of +2, +3, and +4 and plays a pivotal role as a strong oxidant or reductant in the geochemical cycles of elements. Especially, Mn forms varying (oxyhydr)oxides. The oxidation state of structural Mn is characteristic to each oxide and is one of the most important factors controlling its geochemical behaviors such as solubility, sorption capacity, and redox potential. Therefore, it is important to elucidate processes governing Mn oxidation state in predicting the fate and transport of many redox sensitive elements in the environment. X-ray photoelectron spectroscopy (XPS) is a very useful method to determine the oxidation state of various elements in solid phases. In this study, the oxidation states of structural Mn in MnO, $Mn_2O_3$, $MnO_2$ were assessed based on the binding energy spectra of $Mn2p_{3/2}$ and Mn3s using XPS and were compared with those reported elsewhere. $Mn2p_{3/2}$ binding energies were determined as 640.9, 641.5, 641.8 eV for MnO, $Mn_2O_3$, $MnO_2$, respectively, which indicates that the binding energy increased with increasing Mn oxidation state. It was also noted that Ar etching may cause changes in electronic structure configuration on surface of the original sample.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.11 no.3
• /
• pp.199-206
• /
• 2013

Electrowinning process in pyroprocessing recovers U (uranium) and TRU (Trans Uranium) elements simultaneously from spent fuels using a liquid cadmium cathode (LCC). When the solubility limit of U deposits over 2.35wt% in Cd, U dendrites were formed on the LCC surface during the electrodeposition at $500^{\circ}C$. Due to the high surface area of dendritic U, the deposits were not submerged into the liquid cadmium pool but grow out of the LCC crucible. Since the U dendrites act as a solid cathode, it prevents the co-deposition of U and TRUs. In this study, the electrodeposition of U onto a LCC was carried out at 440 and $500^{\circ}C$ to compare the morphology and component of U deposits. The U deposits at $440^{\circ}C$ have a specific shape and were stacked regularly at the center of the LCC pool, while the U dendrites (i.e., ${\alpha}$-phase) at $500^{\circ}C$ were grow out of the LCC crucible. Through the microscopic observation and XRD analysis, the electrodeposits at $440^{\circ}C$, which have a round shape, were identified as an intermetallic compound such as $UCd_{11}$. It can be concluded that the LCC electrowinning operation at $440^{\circ}C$ achieves the co-recovery of U and TRU without the formation of U dendrites.

• Applied Chemistry for Engineering
• /
• v.19 no.3
• /
• pp.326-331
• /
• 2008

The purpose of this work is to develope sodium-containing nonstoichiometric apatitic coatings on solid substrate. The apatitic coatings prepared at different concentrations of sodium salt indicated that the presence of sodium ions exerted significant effects on the physicochemical properties of the apatitic coating including surface morphology, chemical state, and Ca/P ratio. The variation of these properties was sustained up to 0.01 mM of sodium ion concentration. The ratio of calcium to phosphorus was varied from 2.18 to 2.03 which indicated the apatitic coating prepared in this study was calcium-rich nonstoichiometric apatite. The structure of all the samples appeared to be low crystalline. In the presence of sodium ion within the apaptitic coating, the adhesion of human osteoblast-like SaOS-2 cells was significantly promoted. On the other hand, the proliferation of the cells on the apatitic coatings was decreased with the increase of sodium ions. This reverse response of SaOS-2 cells indicates that the interaction between SaOS-2 and apatitic surface triggered considerable changes in intracellular mechanisms including cellular signal transductions.

• Journal of Animal Environmental Science
• /
• v.18 no.sup
• /
• pp.73-80
• /
• 2012

Nitrogen included in animal manure can be used as organic fertilizer if it is treated properly but it may cause serious air and water pollution without proper management. Significant amount of nitrogen losses happen in the form of ammonia when the manure staying in animal house and storage facilities and being composted and applied to the field. In order to maximize the manure nitrogen utilization, it is important to understand the mechanisms of nitrogen loss during the diverse manure handling and treatment procedures. The plant available nitrogen portion of total nitrogen in excreted manure was evaluated based on animal type, animal manure collection system, manure treatment process, and application method. About 27% of nitrogen included in excreted pig manure could be plant available if it is applied to the filed after composting process. The plant available nitrogen portion varies from 29% (surface application) to 54% (solid injection) based on application method of digestated piggery slurry. Plant can use 18% of manure nitrogen if the composted cattle and poultry manure applied to the field using surface application method. Manure treatment and application methods need to be carefully selected to control and utilize the manure nitrogen properly.

• Clean Technology
• /
• v.27 no.3
• /
• pp.223-231
• /
• 2021

In order to address many issues associated with large volume changes of silicon, which has very low electrical conductivity but offers about 10 times higher theoretical capacity than graphite (Gr), a silicon nanoparticles/hollow carbon (SiNP/HC) composite having bimodal-mesopores was prepared using silica nanoparticles as a template. A control SiNP/C composite without a hollow structure was also prepared for comparison. The physico-chemical and electrochemical properties of SiNP/HC were analyzed by X-ray diffractometry, X-ray photoelectron spectroscopy, nitrogen adsorption/desorption measurements for surface area and pore size distribution, scanning electron microscopy, transmission electron microscopy, galvanostatic cycling, and cyclic voltammetry tests to compare them with those of the SiNP/C composite. The SiNP/HC composite showed significantly better cycle life and efficiency than the SiNP/C, with minimal increase in electrode thickness after long cycles. A hybrid composite, SiNP/HC@Gr, prepared by physical mixing of the SiNP/HC and Gr at a 50:50 weight ratio, exhibited even better cycle life and efficiency than the SiNP/HC at low capacity. Thus, silicon/carbon composites designed to have hollow spaces capable of accommodating volume expansion were found to be highly effective for long cycle life of silicon-based composites. However, further study is required to improve the low initial coulombic efficiency of SiNP/HC and SiNP/HC@Gr, which is possibly because of their high surface area causing excessive electrolyte decomposition for the formation of solid-electrolyte-interface layers.

• Clean Technology
• /
• v.27 no.3
• /
• pp.261-268
• /
• 2021

Equilibrium, kinetics, and thermodynamics of adsorption of acid black 1 (AB1) by coal-based granular activated carbon (CGAC) were investigated with the adsorption variables of initial concentration of dye, contact time, temperature, and pH. The adsorption reaction of AB1 by activated carbon was caused by electrostatic attraction between the surface (H⁺) of activated carbon and the sulfite ions (SO₃^-) and nitrite ions (NO₂^-) possessed by AB1, and the degree of reaction was highest at pH 3 (97.7%). The isothermal data of AB1 were best fitted with Freundlich isotherm model. From the calculated separation factor (1/n) of Freundlich, it was confirmed that adsorption of AB1 by activated carbon could be very effective. The heat of adsorption in the Temkin model suggested a physical adsorption process (< 20 J mol^-1). The kinetic experiment favored the pseudo second order model, and the equilibrium adsorption amount estimated from the model agreed to that given by the experiments (error < 9.73% ). Intraparticle diffusion was a rate controlling step in this adsorption process. From the activation energy and enthalpy change, it was confirmed that the adsorption reaction is an endothermic reaction proceeding with physical adsorption. The entropy change was positive because of an active reaction at the solid-liquid interface during adsorption of AB1 on the activated carbon surface. The free energy change indicated that the spontaneity of the adsorption reaction increased as the temperature increased.