• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1714-1716
• /
• 1998

The surface breakdown problem has plagued the development of high solid state for more than 30 years, but the physical basis for this flashover phenomenon is still not understood. The only way to overcome those problem and has a workable compact solid state switch is to passivate the surface by a solid state dielectric material, to coating/encapsulation the device in an insulting medium. In this paper, characteristics of flashover in high field Si-dielectric system behavior under high electric field is discussed.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2003.12a
• /
• pp.207-211
• /
• 2003

In this study, the geometric modeling has been conducted for a new model of 12 inch hot-cold chuck using three-dimensional solid modeler, SolidWorks. Then, the heat transfer analysis and the thermal deformation analysis using FEM have been performed. The results of the analysis show the temperature distribution and the deformed shape of a new model of 12 inch hot-cold chuck. The evaluation for the surface flatness of a new model has been performed based on the deformed shape obtained from ANSYS.

• Journal of Environmental Science International
• /
• v.12 no.9
• /
• pp.1017-1023
• /
• 2003

The high speed elimination process of suspended solid was investigated to treat the pulp waste water by using surface modified magnetite particle and magnetic power. The effects of the various aluminum salts such as Al(NO$_3$)$_3$ㆍ9$H_2O$, AlC1$_3$ㆍ6$H_2O$, $Al_2$(SO$_4$)$_3$ㆍ13∼14 on the COD, BOD and suspended solid were systematically studied. It has been found that the 2.0 wt% of Al was most effective for the modification of Fe$_3$O$_4$ powder and then best for the treatment of pulp waste water, Optimum quantity of modified magnetite in this study was 12 wt%, and aging time was found to be 12 hours. Comparing with the conventional process, the required time for SS removal was drastically decreased. BOB and COD were also effectively removed when applied to the pulp wastewater.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.214-219
• /
• 1998

Analytic and experimental methods have been used for the characterization of flow behavior of semi-solid Al2024 alloy. Backward extrusion experimnet was chosen to avoid the crack on the unconstrained surface. The material constants for the flow stress by the upper bound technique that agreed with experimental results were determined. The various material constants obtained for al temperature range above the solidus temperature have been fitted and represented in the function of temperature and solid fraction. The obtained result has good agreement only in the high solid fraction.

• Journal of computational fluids engineering
• /
• v.5 no.1
• /
• pp.27-32
• /
• 2000

This study investigates the problem of phase change from liquid to solid in the inviscid stagnation flow. The instantaneous location of the solid-liquid interface is fixed for all times by a coordinate transformation. Finite difference method is used to obtain the solution of the unsteady problem, and the growth rate of solid and the transient heat transfer from the surfaces of solid are investigated. The transient solution is dependent on the three dimensionless parameters, but the final steady state is determined by only one parameter of temperature ratio/conductivity ratio. It is observed that the instantaneous heat flux at the surface of solid can be obtained with sufficient accuracy by measuring the thickness of the solid or vice versa.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.6
• /
• pp.481-492
• /
• 2023

The ecofriendly lifestyle has attracted considerable support for sustainable development. Natural dyes, as sustainable products, have become a research focus and development area for many scientists. Ecofriendly processing also supports circular sustainable development. This study effectively obtained tannins as a natural dye from merbau (Intsia bijuga) sawdust using water as an ecofriendly solvent. Merbau sawdust is an underutilized industrial waste. Temperature and solid-solvent ratio variations were performed to extract tannins from merbau sawdust. Temperature and solid-solvent ratio positively affected solution yield and tannin concentration. The optimal condition was identified using response surface methodology and experimental observations. A yield of 0.2217 g tannins/g merbau was obtained under the conditions of 333.15 K and 0.125 solid-solvent ratio. Extraction was controlled by convective mass transfer at the interface of solid particles.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2006.10a
• /
• pp.18-18
• /
• 2006

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.8-8
• /
• 2008

• Macromolecular Research
• /
• v.17 no.6
• /
• pp.388-396
• /
• 2009

The surface properties (water sorption and repellency, adhesion) are closely related to the surface tension of polymer solids. The critical surface tension (${\gamma}_c$) and surface tension (${\gamma}_s$) of a polymer solid were estimated by the contact angle method by our quantitative imaging system. BPDA (3,3',4,4'-biphenyl tetracarboxylic dianhydride)-BAPP (1,3-Bis(4-aminophenoxy) propane) polyimide was successfully synthesized. The ${\gamma}_c$ values were analyzed by a Zisman plot, a Young-$Dupr\acute{e}$-Good-Girifalco plot, and a log ($1+cos{\theta}$) vs log ${\gamma}_L$ plot. The ${\gamma}_s$ value of BPDA-BAPE polyimide was evaluated using the geometric mean equation and our multiple regression analysis. The calculated values of ${{\gamma}_s^d$ (a dispersion component), ${{\gamma}_s^p$ (a polar component), ${{\gamma}_s^h$ (a hydrogen bonding component), and ${\gamma}_s$ were 30.79, 9.32, 0.20, and 40.31 $mN{\cdot}m^{-1}$, respectively. The ${\gamma}_s$ of BPDA-BAPP polyimide containing both a methylene group and an ether group was larger than that of the polyimide containing only a methylene group.

• Korean Journal of Materials Research
• /
• v.18 no.3
• /
• pp.128-136
• /
• 2008

Evaluation of the solid surface properties by an analysis of the liquid penetration rate into powder beds is very important in applications of powder products. The penetration rate is related the surface property in powder beds. In order to analyze the surface property of powders, the contact angle values of several powders were obtained using the Washbun equation and the Wicking method. The surface free energy value ${\gamma}S$ was divided into a polar component ${\gamma}S^p$ and a dispersion component ${\gamma}S^d$. Inorganic powders such as calcite were used as test samples. The effects of the particle size and the type of experimental liquid on the penetration rate were measured. It was confirmed that the surface free energy of the grinding sample is smaller than that of the classification sample.