• 멤브레인
• /
• 제24권5호
• /
• pp.350-357
• /
• 2014

하수방류수 재이용을 위한 RO 전처리로 부유물질 및 콜로이드 물질의 제거를 위해 가압식 MF를 사용하였다. 남양주 J 하수처리장의 생물학적 처리와 모래여과를 거쳐 방류되는 방류수를 원수로 사용하였으며 100 톤/일 규모의 pilot plant를 1년 이상 운전하여 성능을 검토하였다. 가압식 MF에 의해 원수 수질 및 온도의 변화에 상관없이 flux 40 LMH 운전이 가능하였으며 전처리로 응집제를 넣어 용존 유기물을 응집할 경우 60 LMH 운전이 가능하였다. RO 공정에서 장기간 정지 이후 운전을 재개하였을 때 1단 pressure drop이 급격히 증가하는 현상이 나타났고 이러한 결과는 배관 내 형성된 유기물과 이온물질의 복합오염물질이 1단 RO막에 침적된 결과로 사료된다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제27회 추계학술대회논문집
• /
• pp.223-227
• /
• 2006

하이브리드 추진 시스템에서의 산화제 종류에 따른 연소특성을 알아보기 위한 연구를 수행하였다. 산화제는 $GN_2O$와 GOX를 사용하고, 고체연료는 폴리에틸렌(PE)을 사용해 연소시험을 하였다. 산화제 종류에 따른 연소특성은 O/F 비에 따른 화염온도로 해석이 가능하였으며, $GN_2O$가 GOX보다 하이브리드 추진 시스템의 산화제로 효율이 좋음을 확인하였다 산화제의 유량은 직경이 다른 여러 개의 쵸킹 오리피스로 제어했고, 산화제 공급 유량범위는 $0.0138{\sim}0.0427kg/sec$ 이었다. 산화제 종류에 따른 연소특성을 표현하는 실험식은 고체연료의 질량유속으로 나타냈고, 이는 물질전달 수와 산화제의 질량유속으로 얻어진다.

• 한국결정성장학회지
• /
• 제26권4호
• /
• pp.150-154
• /
• 2016

$K_2Ti_6O_{13}$ 휘스커를 합성하는 방법은 고상법, 수열합성법, 소성법, 융제법, 서냉법, 용융법, KDC법, 졸-겔법 등이 있다. 융제법을 이용하여 $K_2Ti_6O_{13}$을 합성하는 연구를 진행하였다. 칼륨 전구체의 종류와 반응온도와 시간을 조절하여 합성 된 $K_2Ti_6O_{13}$의 입자크기와 분포를 제어하였고, 합성된 $K_2Ti_6O_{13}$의 평균입자 크기는 $500nm{\sim}2{\mu}m$였다. KOH와 $TiO_2$의 비율, pH(KOH 첨가량), 반응온도와 반응시간 등의 공정변수에 대해 연구를 진행하였다. 합성된 $K_2Ti_6O_{13}$은 X-선 회절분석기와 전계방사 주사전자현미경을 이용하여 특성평가를 실시하였다.

• Membrane and Water Treatment
• /
• 제4권2호
• /
• pp.143-155
• /
• 2013

Four membranes were used to separate Chlorella sp. from their culture medium in cross-flow microfiltration (MF) experiments: cellulose acetate (CA), cellulose nitrate (CN), polypropylene (PP) and polyvinylidenefluoride (PVDF). It was found that the hydrophilic CA and CN membranes with a pore size of 1.2 ${\mu}m$ exhibited the best performances among all the membranes in terms of permeation flux. The hydrophobicity of each membrane material was determined by measuring the angle between the water (liquid) and membrane (solid). Contact angle measurements showed that deionized (DI) water had almost adsorbed onto the surfaces of the CA and CN membranes, which gave $0.00^{\circ}$ contact angle values. The PP and PVDF membranes were more hydrophobic, giving contact angle values of $95.97^{\circ}$ and $126.63^{\circ}$, respectively. Although the pure water flux increased with increasing pore diameter (0.8 < 1.2 < 3.0 ${\mu}m$) in hydrophilic CA and CN membranes, the best performance in term of filtration rate for filtering a microalgae suspension was attained by membranes with a pore size of 1.2 ${\mu}m$. The fouled membrane pore sizes and pore blocking were inspected using a scanning electron microscope (SEM). MF with large pore diameters was more sensitive to fouling that contributed to intermediate blocking, where the size of the membrane pores is almost equivalent to that of cells.

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.12-16
• /
• 2008

In this work, nano size $BaCeO_3$, which is a possible flux pinning medium of melt processed $YBa_{2}Cu_{3}O_x$ superconductor, was synthesized by the conventional solid state reaction method using powders. $BaCeO_3$ and $CeO_2$ were mixed thoroughly using a ball milling for 24 hours and calcined at $1200^{\circ}C$ for 5 hours for the formation $BaCeO_3$ powder. The obtained $BaCeO_3$ powder was attrition milled at various milling times of 60 min, 120 min and 240 min. The $BaCeO_3$ powders of various milling times were mixed with $YBa_{2}Cu_{3}O_x$ powder. Seed melt processed $YBa_{2}Cu_{3}O_x$-$BaCeO_3$ (15wt.%) superconductors were prepared and the superconducting properties were investigated. It was found that $T_c$ of $Y_{1.5}Ba_{2}Cu_{3}O_x$ samples was not significantly affected by $BaCeO_3$ addition, but $J_c$ of samples was increased by $BaCeO_3$ addition. The $J_c$ improvement by fine $BaCeO_3$ powder (120 min attrition-milled) was effective at low magnetic fields less than 2 T.

• 한국세라믹학회지
• /
• 제38권9호
• /
• pp.787-793
• /
• 2001

고상 반응법으로 제조된 $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-{\delta}}$ 분리막의 소결거동을 살펴보고, 분리막 양면에 산소농도의 차이를 부여하여 산소투과량을 측정하였다. 최적 소결조건에서 제조된 상대밀도 98%의 치밀한 분리막 자체의 산소공공을 통한 혼합전도에 기인해 750$^{\circ}$C∼950$^{\circ}$C의 온도구간에서 산소가 투과되었으며, 850$^{\circ}$C에서 약 0.1ml/$cm^2{\cdot}$min의 투과량을 나타내었다. 안정한 산소 투과량에 도달하기 위해서는 산소투입 후 일정한 시간이 요구되었고, 이러한 산소투과량은 산소부분압의 조절로 제어가 가능하였다.

• 천문학회보
• /
• 제37권2호
• /
• pp.120.1-120.1
• /
• 2012

The Lunar Reconnaissance Orbiter (LRO) launched on June 16, 2009 has six experiments including of the Cosmic Ray Telescope for the Effects of Radiation (CRaTER) onboard. The CRaTER instrument characterizes the radiation environment to be experienced by humans during future lunar missions. The CRaTER instrument measures the effects of ionizing energy loss in matter specifically in silicon solid-state detectors due to penetrating solar energetic protons (SEP) and galactic cosmic rays (GCRs) after interactions with tissue-equivalent plastic (TEP), a synthetic analog of human tissue. The CRaTER instrument houses a compact and highly precise microdosimeter. It measures dose rates below one micro-Rad/sec in silicon in lunar radiation environment. Forbush decrease (FD) event is the sudden decrease of GCR flux. We use the data of cosmic ray and dose rates observed by the CRaTER instrument. We also use the CME list of STEREO SECCHI inner, outer coronagraph and the interplanetary CME data of the ACE/MAG instrument.We examine the origins and the characteristics of the FD-like events in lunar radiation environment. We also compare these events with the FD events on the Earth. We find that whenever the FD events are recorded at ground Neutron Monitor stations, the FD-like events also occur on the lunar environments. The flux variation amplitude of FD-like events on the Moon is approximately two times larger than that of FD events on the Earth. We compare time profiles of GCR flux with of the dose rate of FD-like events in the lunar environment. We figure out that the distinct FD-like events correspond to dose rate events in the CRaTER on lunar environment during the event period.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권2호
• /
• pp.36-39
• /
• 2019

Effects of the spherically shaped Ge and the rod-like carbon-coated Ge on the superconducting properties of $MgB_2$ were investigated. Pure Ge and carbon-coated Ge nano-powders were synthesized under the different amount of $CH_4$ (0 to 5 kPa) by using DC thermal plasma method. When the $CH_4$ was added ~100 nm sized Ge with a spherical shape changed to rod-like morphology with a diameter of ~30-70 nm and a length of ~400-500 nm. Also it was confirmed that thin carbon layers of a few nanometers were formed along the rod length and the agglomerated carbons were found on the edges of rods. Pure spherical Ge and Ge/C rods were mixed and milled with Mg & B precursor to form the doped $MgB_2$ bulk samples by the solid-state reaction method. Almost no change of $T_c$ was noticed for the pure Ge-added $MgB_2$, whereas $T_c$ was found to decrease with the Ge/C-added $MgB_2$ samples. It was found that the pure spherical Ge showed to have a negative effect on the flux pinning of $MgB_2$. However, Ge/C rods can enhance the flux pinning property of $J_c$ due to the coated carbon on Ge rods.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.575-579
• /
• 2023

In this work, pure W and W-0.5wt%HfC alloy (WHC05) were fabricated by sintering and hot-rolling following the same processing route. After exposing to a high flux deuterium plasma irradiation with the D⁺ flux to three fluences of 6.00 × 10²⁴, 2.70 × 10²⁵ and 7.02 × 10²⁵ D/m², the evolution of surface morphology, deuterium retention and hardening behaviors in pure W and WHC05 has been studied. The SEM results show the formation of D blisters on the irradiated area, and with the increase of D implantation, the size of these blisters increases from 200 ~ 500 nm (2.70 × 10²⁵ D/m²) to 1 ~ 2 ㎛ (7.02 × 10²⁵ D/m²) in WHC05 and from 1 ~ 2 ㎛ (2.70 × 10²⁵ D/m²) to > 3 ㎛ (7.02 × 10²⁵ D/m²) in pure W, respectively. A higher D retention and obvious hardening are observed in pure W than that of the WHC05 alloy, indicating an improve radiation resistance in WHC05 compared to pure W.

• 대한환경공학회지
• /
• 제22권7호
• /
• pp.1285-1294
• /
• 2000

본 연구는 모세관 사이폰 현상을 이용한 부유물질제거 장치를 사용하여 부유물질제거 가능성 및 처리수량과 수질에 미치는 영향인자에 대하여 검토하였다. 처리유량은 누적처리시간과 모세관 사이폰 유입부 수두가 클수록 작아지는 반면에 처리수 수질은 향상되는 경향을 보였다. 한계 flux를 $107{\ell}/m/day$로 하고, 응집제를 각각 0, 0.45, $1.82mg/{\ell}$ (as $Al^{+3}$)로 주입하였을 때 처리수 탁도는 평균 2, 1, 0.5NTU를 보였고, 15~17일간 운전하는 동안 세척수량은 처리수량의 약 0.5~0.7%가 사용되었다. 따라서, 모세관 사이폰 현상을 이용한 부유물질제거 장치는 정수처리공정 중의 응집침전과 급속여과공정에 적용할 수 있을 것으로 기대된다.