• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 전력전자학술대회
• /
• pp.66-67
• /
• 2017

본 논문은 Solar Cell을 응용하여 통신기능과 함께 전원공급이 가능한 배터리 없는 가시광 통신용 수신기를 제안한다. 기존 포토다이오드(PD : Photo Diode)를 적용한 가시광 통신용 수신기는 수신신호 처리를 위한 PD 드라이버와 신호 처리부를 동작시키기 위하여 별도의 전원 회로와 배터리가 필요하다. 따라서, 체적 및 비용의 증가가 불가피하여 가시광 통신의 큰 문제점으로 대두되고 있다. 하지만 제안회로는 PD를 Solar Cell로 대체하여 기존의 신호를 수신함과 동시에 Solar Cell의 광전효과를 통해 생성된 전력을 사용하여 별도의 부가회로 없이 전원 공급이 가능하며 무선통신 기술의 새로운 패러다임을 제시한다. 제안된 회로의 타당성 검증을 위해 Solar Cell을 응용한 시작품을 제작하여 실험 결과를 제시한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.639-643
• /
• 2001

Recently, photovoltaic system has been studied widely as a renewable energy system, because it does not produce environmental pollution and it has infinity energy source from the sun. A study on photovoltaic system has a lot of problems like as reappearance and repetition of some situation in the laboratory experiment for development of MPPT algorithm and islanding detection algorithm, because output characteristics of solar cell are varied by irradiation and surface temperature of solar cell. And this system is consisted a lot of solar cell unit. Therefore, the assistant equipment which emulates the solar cell characteristics which can be controlled arbitrarily by researcher is require to the researchers for reliable experimental data. In this paper, the virtual implement of solar cell (VISC) system is proposed to solve these problems and to achieve reliable experimental result on photovoltaic system. VISC system emulates the solar cell output characteristics, and this system can substitute solar cell in laboratory experiment system. To realize the VISC, mathematical model of solar cell is studied for driving converter and the DC/DC converters are compared in viewpoint of tracking error using computer simulation. And then analysis of parallel and series characteristics was done for combination of VISC model.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1454-1470
• /
• 2014

This paper propose a new power conditioner topology with intelligent power management controller that integrates multiple renewable energy sources such as solar energy, wind energy and fuel cell energy with battery backup to make best use of their operating characteristics and obtain better reliability than that could be obtained by single renewable energy based power supply. The proposed embedded controller is programmed for maintaining a constant voltage at PCC, maximum power point tracking for solar PV panel and WTG and power flow control by regulating the reference currents of the controller on instantaneous basis based on the power delivered by the sources and load demand. Instantaneous variation in reference currents of the controller enhances the controller response as it accommodates the effect of continuously varying solar insolation and wind speed in the power management. The power conditioner uses a battery bank with embedded controller based online SOC estimation and battery charging system to suitably sink or source the input power based on the load demand. The simulation results of the proposed power management system for a standalone solar/WTG/fuel cell fed hybrid power supply with real time solar radiation and wind velocity data collected from solar centre, KEC for a sporadically varying load demand is presented in this paper and the results are encouraging in reliability and stability perspective.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.25-25
• /
• 2010

In this paper, we have investigated the electrical characteristics for solar-cell and wind power generator hybrid system. The output of electricity for solar cell - wind generator hybrid system were investigated according to the weather conditions at Naju province.

• 전기학회논문지P
• /
• 제60권2호
• /
• pp.99-104
• /
• 2011

In this paper, the intelligent landscape lighting power control and monitoring system with solar sell generator equipment is proposed. The first, the intelligent landscape lighting power controller is designed using the fuzzy logic control method. And the fuzzy logic controller is used to save power consumption for various reference intensity of the illumination. The second, the GUI monitoring system is presented. It has control and display faculty. And the practical experiment device is used to evaluate the performance criteria of the proposed intelligent landscape lighting power control system with the solar cell power generation equipment. From the experiment results, we present the property of proposed fuzzy controller such as steady state error, the tracking and power consumption characteristic for the reference intensity of illumination. And also we show the superiority of power control as well as the characteristic of GUI monitoring system in the proposed system.

• 한국산학기술학회논문지
• /
• 제6권5호
• /
• pp.396-400
• /
• 2005

소규모 독립형 태양광발전시스템의 안정적인 설계를 위해서는 태양전지와 배터리 용량이 매우 중요한 요소이다. 태양전지 및 배터리의 용량산정이 잘못되면 시스템의 동작이 불안정해지고 잦은 고장의 원인이 된다. 따라서 본 논문에서는 안정적인 태양광발전시스템의 설계를 위해 부하특성을 고려한 태양전지와 배터리 용량산정 방안을 제시하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.523-525
• /
• 2005

In this paper, electronic-controlled power supply(EPS) system for solar cell characteristic is proposed to solve various problems and to achieve reliable experimental result on photovoltaic system. This system emulates the solar cell output characteristics, and it can substitute solar cell in laboratory experiment system. New model for solar cell is proposed to realize the EPS system for solar cell, which is based on the interpolation. Both simulation and experiment are executed to show the validity of the proposed EPS system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.687-691
• /
• 2001

With today's global environmental and energy problems, high expectations exist for solar power generation to reduce carbon dioxide generated by the consumption of fossil fuels. On the other hand, power consumption in residential homes is increasing every year. Among the many household appliances, the power demand for air conditioners increases dramatically during the summer, particularly in the afternoons. As this pattern closely matches the output pattern of solar cells, it should be possible to combine a photovoltaic array with an air conditioner to decrease the energy consumption within the home. We have developed a residential solar-powered air conditioner that operates through a combination of photovoltaic array and commercial power. In this paper, the configuration and specification of the residential solar-powered system are described to a novel high efficiency inverter using a ZVCS boost converter. And the performance evaluations of the solar-powered air conditioner are examined by the analysis of a new tracking controller with a maximum power $P_{max}$ detection of solar cell.

• 한국항공우주학회지
• /
• 제31권1호
• /
• pp.67-72
• /
• 2003

본 논문에서는 다목적실용위성 1호의 태양전지를 모델링하고 해석하였다. 태양전지판의 모델링은 적은 수의 데이터만을 갖고 있으므로 비선형 시스템을 모델링하는 데 적합한 누럴 알고리즘을 사용하였다. 모델링 결과는 다목적실용위성 1호의 태양전지 셀 데이터를 고려한 태양전지판의 해석과 시뮬레이션에 의해 그 특성을 증명하였다. 또한, 태양전지판의 특성 및 전력발생 특성은 모델링 결과를 사용하여 해석하였다

• 한국태양에너지학회 논문집
• /
• 제24권2호
• /
• pp.89-96
• /
• 2004

PV system is easy to operate and maintain than the other power generating system since it generally contains no moving parts, operates silently and requires very little maintenance. A solar cell generates DC power from sunlight whose power is different at any instance according to condition of irradiation and temperature variables. In order to improve the system utility factor and efficiency of energy conversion, it is desirable to operate the PV system at maximum power point of solar cell under different condition This paper describes the experimental results of the PV system contain solar modules and a DC-DC converter(boost type chopper) using fuzzy controller. The experimental results show that the PV system always operates at maximum power point of solar cells having stabilized output voltage waveform with relatively small ripple component.