• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.234-235
• /
• 2015

In South Korea, small photovoltaic equipment is increasingly adopted in more detached houses on the constant basis. With this broader use of small photovoltaic equipment, its systematic maintenance becomes all the more necessary. However, photovoltaic facility maintenance has been concentrated solely on large-scale solar energy generation plants in the country while hardly covering smaller facilities. In this research, the JEM rule and extant maintenance company services were analyzed to develop a proper maintenance model for small photovoltaic equipment. The maintenance service procedures designed herein are as follows: A small photovoltaic equipment user chooses a maintenance company and signs a contract. Once a contract is made, the Korea Energy Management Corporation provides a certain kind of incentive to the company. The company provides maintenance service to the user and receives a service fee. If such a maintenance service model is in place, small photovoltaic equipment efficiency is expected to increase and users could receive systematic maintenance services. Also the new creation of small photovoltaic equipment maintenance service would form a new market to generate more jobs for the society.

• KSBB Journal
• /
• v.25 no.6
• /
• pp.513-519
• /
• 2010

Marine bacterium producing pigment was isolated from the solar saltern of Mijo-myeon, Namhae, Korea. Based on phenotypic characteristics and 16S rRNA sequence analysis, the strain was identified as Kocuria sp., which produced a yellow pigment. The pigment showed UV absorption maximum at 469nm. The bacterial strain grew well on Marine broth 2216 culture medium. Productivity of the pigment reached the maximum value after 44 hours at $30^{\circ}C$, 2% NaCl and pH 6.0. The pigment was produced best when supplied by 1% lactose as a carbon source and 1% beef extract as a nitrogen source. The result of the color stability study showed that pigment extracted from the strain by ethanol was stable at $-20-25^{\circ}C$ and also showed higher stability over 70% for 14 days in light conditions at $25^{\circ}C$. The pigment extract was also stable for all metal ions tested, except for $FeCl_2$.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.833-844
• /
• 2008

Bio-energy offers the opportunity to lessen fossil fuel consumption. Energy derived from solar, wind, hydroelectric, geothermal, and biomass sources are considered renewable. Because most forms of bio-energy are derive deither directly or indirectly from the sun, there is an abundant supply of renewable energy available, unlike fossil fuels. The use of bio-energy also provides environmental, economic and political benefits. Bio-energy can be produced from a marine source such as biomass provides a $CO_2$ neutral, non-polluting form of energy. In this paper, the potential of marine biomass is increasingly discussed, given the size of the resource in that more than three quarters of the surface of planet earth is covered by water.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.4
• /
• pp.602-608
• /
• 2002

The flexible structure like solar array and antenna in spacecraft shows very sensitive responses to the inner or outer disturbance and noise. And the spacecraft becomes more complex and larger as it has various mission and role. But since the spacecraft need to have the limited mass, the thin and light material should be selected and this necessity induces the decrease d natural frequency and structural stiffness. It reduces the ability of adapting to the disturbance and induces the structural unstability. Certainly, the disturbance does not only make the structural unstability, but also give the bad effect to the precise attitude control. So it is necessary to control the vibration in the space. In this paper, the flexible structure control modeling with piezo sensor and piezo actuator is developed. The model uncertainty of damping ratio is overcome by robust control. The system equation is induced by the finite element method.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.447-452
• /
• 2007

Greenhouses should be heated during nights and cold days in order to fit growth conditions in greenhouses. Ground source heat pump(GSHP) or geothermal heat pump system(GHPs) is recognized to be outstanding heating and cooling system. Horizontal GSHP system is typically less expensive than vertical GSHP system but requires wide ground area to bury ground heat exchanger(GHE). In this study, a horizontal GSHP system with thermal storage tank was installed in greenhouse and investigated as performance characteristics. In the daytime, heating load of greenhouse is very small or needless because solar radiation increases inner air temperature. The results of study showed that the heating coefficient of performance of the heat pump ($COP_h$) was 2.9 and the overall heating coefficient of performance of the system($COP_{sys}$) was 2.4. Heating energy cost was saved 76% using the horizontal GSHP system with thermal storage tank.

• ETRI Journal
• /
• v.36 no.4
• /
• pp.654-661
• /
• 2014

We develop accurate finite-difference time-domain (FDTD) modeling of polymer bulk heterojunction solar cells containing Ag nanoparticles between the hole-transporting layer and the transparent conducting oxide-coated glass substrate in the wavelength range of 300 nm to 800 nm. The Drude dispersion modeling technique is used to model the frequency dispersion behavior of Ag nanoparticles, the hole-transporting layer, and indium tin oxide. The perfectly matched layer boundary condition is used for the top and bottom regions of the computational domain, and the periodic boundary condition is used for the lateral regions of the same domain. The developed FDTD modeling is employed to investigate the effect of geometrical parameters of Ag nanospheres on electromagnetic fields in devices. Although negative plasmonic effects are observed in the considered device, absorption enhancement can be achieved when favorable geometrical parameters are obtained.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.221.1-221.1
• /
• 2012

The Korea Astronomy and Space Science Institute (KASI) is developing three 1.6m optical telescopes with $18k{\times}18k$ mosaic CCD cameras. These telescopes will be installed and operated at Chile, South Africa, and Australia for Korea Micro-lensing Telescope Network (KMTNet) project. The main scientific goal of the project is to discover earth-like extra-solar planets using the gravitational micro-lensing technique. To achieve the goal, each telescope at three sites will continuously monitor the specific region of Galactic bulge with 2.5 minute cadence for five years. Assuming 12 hour observation in maximum for a night, the amount of 200 GB file storage is required for one night observation at one observatory. If we consider the whole project period and the data processing procedure, a few PB class data storage, high-speed network, and high performance computers are essential. In this presentation, we introduce the KMTNet data management plan that handles gigantic data; raw image collecting, image processing, photometry pipeline, database archiving, and backup.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.231.1-231.1
• /
• 2012

한국해양과학기술원 해양위성센터에서 주관운영을 수행하고 있는 천리안 위성의 해양탑재체인 천리안 해양관측위성(이하 GOCI)은 정지궤도위성용 해색센서로서, 태양을 광원으로 지구상의 해수 표면 부근에서 반사되어 대기를 통과한 가시광 및 근적외 대역을 8개 밴드로 분광하여 관측하는 센서이다. 해색센서의 경우, 일반적으로 센서에 입사되는 광신호의 약 90%가 대기에 의한 신호이며, 약 10%에 해당되는 신호만 원래 관측목적인 해수에 의한 신호이기 때문에, 5% 이내의 높은 복사보정 정확도가 요구된다. 이러한 높은 복사보정 정확도를 만족시키기 위해서는, 지상에서의 현장관측을 통한 위성자료 검보정 뿐만 아니라, 발사 후 위성 궤도상에서 센서의 복사보정을 수행하는 궤도상 복사보정이 체계적으로 수행되어야 한다. GOCI는 태양을 기준광원으로 하는 태양광 복사보정을 채택하여, 센서의 셔터부에 태양광 복사보정을 위한 2개의 태양광확산기(Solar Diffuser)를 장비하고 있다. 본 발표에서는 궤도상 시험 후 약 16개월에 걸친 궤도상 복사보정 운영결과와 관련하여, 발사 후 일별, 월별, 계절별 등 각 기간별 센서의 이득변화를 관찰하였으며, 그 결과 1년을 기준으로 약 3% 범위로 주기적인 이득 변화가 있음을 확인하였다. 지상시험결과와의 비교에 의해, 태양광확산기에 대한 태양입사각이 이러한 주기적인 이득 변화의 주 원인임을 궤도상 복사보정 운영결과를 통해 밝히고자 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.554-559
• /
• 2017

Recently, the global attention is focused on the development of the renewal aero-propulsion systems proved in the air pollution, the noise, the great operational cost, safety and risks. Especially, various study are conducting for the development of the advanced high power to weight ratio aircraft through the significant reduction of fuel consumption and upgrade of the propulsion efficiency, using the alternative propulsion system developments such as hydrogen and solar power system. The hybrid propulsion system can be the representative propulsion system which get the power sources by combining the merits of two or more power sources. In this study, the advancement trends, characteristics, design method which can be applied to the renewal future UAV development.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.6.1-6.1
• /
• 2009

최근 신 재생 에너지에 대한 관심이 고조되고 있으며 특히 태양전지는 차세대 대체에너지로 많은 연구 개발이 이루어지고 있다. 현재 태양전지 시장은 벌크실리콘 태양전지가 주를 이루고 있으나, 박막형, 유기물, 염료감응형 등 다양한 차세대 태양전지가 개발되고 있다. 차세대 태양전지는 글래스나 폴리머 기판위에 형성된 전극을 바탕으로 하여 다양한 형태의 태양전지가 형성되기 때문에 태양전지용 투명도전성 산화물 전극에 대한 중요성이 증가하고 있다. 예를 들어 실리콘 박막형 태양전지의 경우 수소 플라즈마 분위기 안정성 때문에 ZnO:Al 전극이 개발, 적용되고 있다. 이밖에도 ZnO는 나노입자, 나노로드 등의 다양한 형태를 기반으로 유기물 및 염료감응형 태양전지 전극으로 적용되고 있다. 본 연구에서는 전기화학적 방법을 이용해 나노입자, 나노로드, 나노 sheet 등 다양한 형태의 ZnO 나노구조를 형성한 후, 태양전지 적용을 위한 전기적, 광학적 특성을 분석하였다. 3차원 형태의 ZnO sheet 전극은 90% @ 550 nm 가 넘는 우수한 광특성 (Haze value)을 보였으며, 염료감응형 태양전지에 적용되었을 경우 2차원 형태의 ZnO 전극에 비해 Jsc 값이 2.5배 이상 향상되었다.