• Journal of Bio-Environment Control
• /
• v.8 no.1
• /
• pp.1-8
• /
• 1999

This study was carried out to estimate the warmed water irrigation and the warmed soil efficiency on protected cultivation of cucumber in winter season. The water of 28$^{\circ}C$ was continuously supplied for soil warming and that is $25^{\circ}C$ for warmed water irrigation. Cucumber growth was analyzed when tile soil kept up the optimum temperature in the root zone. The cucumber growth are compared with the warmed soil plots. isolated warmed soil plots and non-warmed soil plots. The cucumber growth in warmed soil plots and isolated warmed soil plots were 20~50% higher than non-warmed soil plots compare to that by the warmed irrigation. In the non-warmed soil plots, the stem diameter and the number of leaves in the warmed water irrigation plots are 10% higher than those in the normal water irrigation plots. The yields in isolated warmed soil plots were 37~38% higher than non-warmed soil plots and those in warmed soil plots were 85~96% higher than non-warmed soil plots. The fruit length, weight and diameter in warmed soil plots were 15% higher than those in the non-warmed plots.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.2
• /
• pp.179-194
• /
• 2007

The design and analysis of satellite power subsystem is an important driver for the mass, size, and capability of the satellite. Every other satellite subsystem is affected by the power subsystem, and in particular, important issues such as launch vehicle selection, thermal design, and structural design are largely influenced by the capabilities and limitations of the power system. This paper introduces a new electrical power subsystem design program for the rapid development of LEO satellite and shows an example of design results using other LEO satellite design data. The results shows that the proposed design program can be used the optimum sizing and the analytical prediction of the on-orbit performance of satellite electrical power subsystem.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.749-752
• /
• 2009

Anodized tubular titania ($TiO_2$) electrodes (ATTEs) are prepared and used as both the photoanode and the cathode substrate in a photoelectrochemical system designed to split water into hydrogen with the assistance of an enzyme and an external bias (solar cell). In particular, the ATTE used as the cathode substrate for the immobilization of the enzyme is prepared by two methods; adsorption and crosslinking. Results show that the optimized amount of enzyme is 10.98 units for the slurried enzyme, 3.66 units for the adsorbed one and 7.32 units for the crosslinked one, and the corresponding hydrogen evolution rates are 33.04, 148.58, and 234.88 umol/hr, respectively. The immobilized enzyme, specifically the chemically crosslinked one, seems to be much superior to the slurried enzyme, due to the enhanced charge-transfer process that is caused by the lower electrical resistance between the enzyme and the ATTE. This results in a greater number of accepted electrons and a larger amount of enzymes able to deal with the electrons.

• Journal of Multimedia Information System
• /
• v.5 no.1
• /
• pp.47-52
• /
• 2018

We have developed an electromagnetic generator to bury in subcutaneous area or abdominal cavity of the birds. As we can't use a solar battery, it is extremely difficult to supply a power for subcutaneous implantation such as biosensors under the skin due to the darkness environment. We are aiming to test the antigen-antibody reaction to confirm an avian influenza. One solution is a very small generator with the electromagnetic induction coil. We attached the developed coil to chickens and pheasants and recorded the electric potential generated as the chicken walked and the pheasant flew. The electric potential generated with physical simulator is equal to or exceeds the 7 V peak-to-peak at maximum by 560/min of flapping of wings. Even if we account for the junction voltage of the diode (200 mV), efficient charging of the double-layer capacitor is possible with the voltage doubler rectifier. If we increase the voltage, other problems arise, including the high-voltage insulation of the double-layer capacitor. For this reason, we believe the power generated to be sufficient for subcutaneous area of birds. The efficiency, magnetic 2 mm in length and coil 15mm in length, if axial direction is rectified, the magnetic flux density given to the coil could calculated to 7.1 % and generated power average 0.47mW. The improvements in size and wire insulation are expected in the future.

• 한국태양에너지학회:학술대회논문집
• /
• 2009.04a
• /
• pp.180-183
• /
• 2009

In this study, Urban Climate Simulation was performed by 3-Dimensional Urban Canopy Model. The characteristics of urban climate was analyzed combining artificial land coverage, building size, heat production from the air conditioning and topographic conditions as physical variables which affects urban climate characteristics. The results are as follows. (1)The aspects of the urban climatal change is derived to be related to the combination of the building coverage ratio, building height and shading area. (2)Whole heat generation was influenced by the convective sensible heat at the lower building height and by the artificial heat generation at the higher one over 20-story building influence to some extent of the building coverage ratio. The effect of the altitude is not more considerable than the other variables as below $1^{\circ}C$ of the air temperature.

• Journal of the Korean housing association
• /
• v.26 no.1
• /
• pp.43-51
• /
• 2015

The purpose of this study was to analyze the planning characteristics and it's application of container architecture as case study. Field survey was used to analyze the spatial planning characteristics in terms of development outline, appearance, exterior, floor plan and interior of eight famous cases in Berlin, Hamburg, Hannover, Amsterdam and Paris of Europe. The results of this study were as follows; Firstly, good examples of container architectures such as student housing, social service center, temporary medical facility and cruise terminal in Europe suggested the potential of domestic applicability in various purposes and development. Secondly, various types of freight container, building container and module frame system should be developed with their reprocessing environment. Thirdly, it is necessary for us to develop ISO type(20~40ft) container and standard plan with interior and storage design reflecting demands of residents. Finally, the use of container module will be an environmental-friendly alternative for its modularity and reusability, so it should be used as it is without severe deformation. The development of environmental friendly energy sources such as hydro and solar power is necessary for domestic container architecture as well. The container design should include the use of high quality of exterior finishing materials and the plan of aesthetical color planning to make the building a local landmark.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.164-165
• /
• 2015

최근 친환경 에너지와 주변 환경을 응용하는 기술이 발달함에 있어 환경 에너지의 관심이 높아지고 있다. 특히 태양빛은 에너지와 환경적 측면에서 중요한 부분을 차지하고 있으므로 그러한 태양열을 이용한 장치의 연구는 사람의 쾌적한 삶을 위해 필요하다고 할 수 있을 것이다. 그중에 실내로 유입되는 태양빛을 조절하는 장치로 커텐, 블라인드, 자외선 차단 유리등 여러 가지 있지만 상업건물에서 가장 효과적으로 많이 사용되고 있는 시스템 중 하나는 Awning시스템을 많이 사용하고 있다. 이러한 제품은 오존층 문제등의 환경에 관심이 높아지면서 전원주택 및 상가 등을 중심으로 새롭게 관심이 고조되고 있으며, 모양과 기능이 다양하게 개발되고 있다. 그러나 기존의 Awning 시스템은 포리에스테르 또는 아크릴 원착사 원단을 이용한 고정식과 접이식이 있으며 차양시스템은 수동과 자동이 있다. 이러한 시스템은 대부분 태양의 직사광선이나 비를 차단 할 수 있는 기능만 가지고 있다. 본 논문에서는 Awning 시스템에 솔라 판넬을 이용한 친환경 자동 Awning 시스템의 개발이 필요하다. 이 Awning 시스템은 직사광선의 차양 및 빗물방지 와 태양에너지를 얻을 수 있도록 개발 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.268-269
• /
• 2008

Charging of spacecraft occurs in plasma and radiation environment. Especially, we focused on an accident caused by internal charging in a glass material that was used as the cover plate of solar panel array, and tried to measure the charge distribution in glass materials under electron beam irradiation by using a PEA (Pulsed Electro-Acoustic method) system. In the case of a quartz glass (pure $SiO_2$), no charge accumulation was observed either during or after the electron beam irradiation. On the contrary, positive charge accumulation was observed in glass samples containing metal-oxide components. It is found that the polarity of the observed charges depends on the contents of the impurities. To identify which impurity dominates the polarity of the accumulated charge, we measured charge distributions in several glass materials containing various metal-oxide components and calculated the trap energy depths from the charge decay characteristics of all glass samples.

• 한국태양에너지학회:학술대회논문집
• /
• 2012.03a
• /
• pp.391-393
• /
• 2012

CuInGa 전구체를 여러 분위기에서 급속 열처리 공정 (rapid thermal processing; RTP)을 이용하여 셀렌화하여 CuInGaSe 박막을 제작하였다. 공정조건은 각각 진공상태, 아르곤 가스 유동 상압상태, 아르곤 분위기 상압밀폐에서 덮개 유리를 사용한 상태 및 아르곤 밀폐상압에서 추가로 Se을 공급한 상태이었다. 제작된 CuInGaSe의 특성을 ICP 측정을 통하여 분석하였다. 열처리 조건에서 시스템이 밀폐상태에 가까울수록 Se 증기압이 높을수록 CuInGaSe 박막의 Se 함량이 증가하였다. 아르곤 분위기 상압 밀폐상태에서 제작된 CuInGaSe 박막을 이용하여 제작한 태양전지의 효율은 9.6%이었다.

• Nuclear Engineering and Technology
• /
• v.47 no.6
• /
• pp.647-661
• /
• 2015

The supercritical $CO_2$ (S-$CO_2$) Brayton cycle has recently been gaining a lot of attention for application to next generation nuclear reactors. The advantages of the S-$CO_2$ cycle are high efficiency in the mild turbine inlet temperature region and a small physical footprint with a simple layout, compact turbomachinery, and heat exchangers. Several heat sources including nuclear, fossil fuel, waste heat, and renewable heat sources such as solar thermal or fuel cells are potential application areas of the S-$CO_2$ cycle. In this paper, the current development progress of the S-$CO_2$ cycle is introduced. Moreover, a quick comparison of various S-$CO_2$ layouts is presented in terms of cycle performance.