• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1115-1123
• /
• 2008

When constructing projects such as road embankments, bridge approaches, dikes or buildings on soft, compressible soils, significant settlements may occur due to the consolidation of these soils under the superimposed loads. The compressibility of the soil skeleton of a soft clay is influenced by such factors as structure and fabric, stress path, temperature and loading rate. Although it is possible to determine appropriate relations and the corresponding material parameters in the laboratory, it is well known that sample disturbance due to stress release, temperature change and moisture content change can have a profound effect on the compressibility of a clay. The early research of Tezaghi and Casagrande has had a lasting influence on our interpretation of consolidation data. The 24 hour, incremental load, oedometer test has become, more or less, the standard procedure for determining the one-dimensional, stress-strain behavior of clays. An important notion relates to the interpretation of the data is the ore-consolidation pressure ${\sigma}_p$, which is located approximately at the break in the slope on the curve. From a practical point of view, this pressure is usually viewed as corresponding to the maximum past effective stress supported by the soil. Researchers have shown, however, that the value of ${\sigma}_p$ depends on the test procedure. furthermore, owing to sampling disturbance, the results of the laboratory consolidation test must be corrected to better capture the in-situ compressibility characteristics. The corrections apply, strictly speaking, to soils where the relation between strain and effective stress is time independent. An important assumption in Terzaghi's one-dimensional theory of consolidation is that the soil skeleton behaves elastically. On the other hand, Buisman recognized that creep deformations in settlement analysis can be important. this has led to extensions to Terzaghi's theory by various investigators, including the applicant and coworkers. The main object of this study is to suggestion the modified compression index value to predict settlements by back calculating the $C_c$ from different numerical models, which are giving best prediction settlements for multi layers including very thick soft clay.

• Korean Journal of Environment and Ecology
• /
• v.15 no.3
• /
• pp.213-223
• /
• 2001

This study was carried out to clarify the distribution pattern of Salicaceae species which are considered as obligatory riparian vegetation, and also the correspondence between their distribution and the environment factors. Eighty-three study sites by stratified sampling were selected from the upstream to the downstream of An-sung stream. Vegetation factors such as coverage by species, disturbance, etc., and environmental factors including microtopography, soil properties, etc., measured and analyzed. Salicaceae species were identified as total 2 genera, 11 species through all study area, and the average occurring species were 2.8 species.5. koreensis among other species showed highest occurring frequency at An-sung streams, and also it was distributed widely through study area. S. gracizistyla was mainly fecund at upstream sites, where sandy soil texture and high longitudinal slope were developed. S. purpurea vats. japonica was mostly observed in the sandy soil, the same as S. gracilistytu and however, was not dominant but rather mixed with S. gracitistyta and S. koreensis. On the other hand, distribution of S. glandulosa were closely related with littoral zone of the lake and the lower sea level with sandy loam and loamy sand Boils of high organic matter content. Under CCA, canonical correspondence analysis, distribution of Saticaceae species was positively correlated with environmental gradients such as soil properties along to topography.

• Journal of agriculture & life science
• /
• v.45 no.6
• /
• pp.81-88
• /
• 2011

This study was carried out to provide basic information for standard cultivation guideline of Korean mountain cultivated ginseng (Panax ginseng). Environmental conditions, soil properties, growth process, cultivation methods and sowing timing were investigated in cultivations of Korean mountain cultivated ginseng in Korea (18 region in 9 province). Most of Korean mountain cultivated ginseng was cultivated to north, north-east, east or north-west direction in broad-leaved forest, IV age group, and 500~1,000 trees/ha. Elevation was below 500 m and slope was below $25^{\circ}$ in cultivation. There were significant differences in soil properties by region and cultivation based on organic matter (3.43~24.07%) and pH level (3.8~5.7). Sprouting, leaf unfolding, flowering, fruiting, red ripening, fruit drop and leaf drop of Korean mountain cultivated ginseng was investigated in cultivation. The results show that it took 98 days on average for the whole growth process. There were two methods, sowing and transplant for cultivation. Sowing methods were classified in sowing after opening-testa treatment and direct sowing. and it was 70% and 30%, respectively.

• Journal of the Korean Geosynthetics Society
• /
• v.21 no.4
• /
• pp.101-109
• /
• 2022

This study describes the results of model experiment to analyze the effect of backfill material types on the behavior of underground facility. In the model experiment, backfill materials around the existing underground facility were applied with soil (Jumunjin standard sand) and CLSM. The displacement of underground facility was analyzed for each excavation stage considering the separation distance between the excavation surface and the backfill area based on the experimental results. When soil was applied as a backfill material, the soil on the back of the excavation surface collapsed by excavation and formed an angle of repose, and the process of slope stability was repeated at each excavation stage. In addition, the displacement of underground facility began to occur in the excavation stage that the failure line of soil passes the installation location of the underground facility. When CLSM was applied as a backfill material, there was almost no horizontal and vertical displacement of the ground regardless of the separation distance from the excavation surface even when excavation proceeded to the backfill depth. Therefore, this result showed that it can have a resistance effect against the lateral earth pressure generated and the collapse of the original ground by adjacent excavation, if a backfill material with high stiffness such as CLSM is applied.

• Economic and Environmental Geology
• /
• v.46 no.4
• /
• pp.301-312
• /
• 2013

Landslides are caused by complex interaction among a large number of interrelated factors such as topography, geology, forest and soils. In this study, a comparative study was carried out using fuzzy relationship method and artificial neural network to evaluate landslide susceptibility. For landslide susceptibility mapping, maps of the landslide occurrence locations, slope angle, aspect, curvature, lithology, soil drainage, soil depth, soil texture, forest type, forest age, forest diameter and forest density were constructed from the spatial data sets. In fuzzy relation analysis, the membership values for each category of thematic layers have been determined using the cosine amplitude method. Then the integration of different thematic layers to produce landslide susceptibility map was performed by Cartesian product operation. In artificial neural network analysis, the relative weight values for causative factors were determined by back propagation algorithm. Landslide susceptibility maps prepared by two approaches were validated by ROC(Receiver Operating Characteristic) curve and AUC(Area Under the Curve). Based on the validation results, both approaches show excellent performance to predict the landslide susceptibility but the performance of the artificial neural network was superior in this study area.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.70-76
• /
• 2017

Among the forest road pavement methods, the majority of current constructions utilize concrete pavements but it has disadvantages as follows: many cracked concrete pavements generated by the erosion of underlying soil layers, could not be used as forest roads in steep slope during winter, and cement contains hazardous chemicals (hexavalent chromium, etc.). In order to supplement the limitations of the use of concrete pavement, this study was conducted to investigate the operation process and cost, the strength and compaction of the experimental forest road pavement(85 m) utilizing eco-friendly solidification material at Goryeong-gun, Gyeongsangbuk-do. The work elements of experimental forest road paving were classified into: preparation, Roadbed excavation, Roadbed grading, subgrade compaction, form work, collection and selection of site soil, mixing site soil and eco-friendly solidification material, paving by eco-friendly solidification material, compaction by vibrating roller and curing. The result of economic analysis using construction cost shows that for concrete costs total to $38,681won/m^3$ while for the eco-friendly paving material it is $38,245won/m^3$. Thus the construction costs for concrete and the eco-friendly paving material are similar. And the results of the Schmidt Hammer test for strength analysis by curing period are 10.5-13.5 MPa for 7 days, 18.1-22.7 MPa for 14 days, and 20.8-23.0 MPa for 28 days.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.27 no.2
• /
• pp.34-44
• /
• 2024

Recently, due to abnormal climate caused by climate change, natural disasters such as floods, landslides, and soil outflows are rapidly increasing. In Korea, more than 63% of the land is vulnerable to slope disasters due to the geographical characteristics of mountainous areas, and in particular, Quarry mines soil and rocks, so there is a high risk of landslides not only inside the workplace but also outside.Accordingly, this study built a DEM using UAV and aviation LiDAR for monitoring the quarry, conducted a time series change analysis, and proposed an optimal DEM construction method for monitoring the soil collection site. For DEM construction, UAV and LiDAR-based Point Cloud were built, and the ground was extracted using three algorithms: Aggressive Classification (AC), Conservative Classification (CC), and Standard Classification (SC). UAV and LiDAR-based DEM constructed according to the algorithm evaluated accuracy through comparison with digital map-based DEM.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.2
• /
• pp.111-119
• /
• 2009

The purpose of this study is to decide the suitability of the land use on eco-city by analysing ecological elements using GIS. Selected ecological elements for suitability analysis were altitude, slope, watershed, biotope, soil productivity, visual sensitivity, vegetation, and green connection. The category of each element was classified into 5 grades, and was given weight according to each element. The maximum value of each element was extracted from overlay analysis process. The result of analysis was classified into 5 grade finally. As a result, land use was proposed to be development, conservation, and preservation area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1359-1369
• /
• 2012

In the case of using pile foundation to support bridge abutments on soft ground, the soft ground often causes serious troubles such as lateral movement of bridge abutments by lateral surcharges. In this paper, we investigated and measured the amount of strain of a bridge abutment in the south-western part of Korea. To check the stability and possibility of lateral movement of the bridge abutment, we used the four analysis methods and compared those results; lateral movement index, index for decision of lateral movement and infinite element analysis method. We performed soil and ground tests to fine the causes of the strain and lateral movement. After reviwing several types of repair methods, we suggested the anker reinforcement method along with surcharge process method as a proper repair and rehabilitation of the bridge abutment. Our investigation by through the infinite element analysis method confirmed the effectiveness of the anker reinforcement method allong with the surcharge process method.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.6
• /
• pp.1-15
• /
• 2014

A dredging on erosion control dam has been enforced without evaluation the factors that affect the dredging. In addition, there is the negative effect much more than positive effect by dredging on erosion control dam. Therefore, this study was carried out to develop evaluation indicators and to suggest fieldbook in order to determine whether sand deposits at erosion control dam should be dredged up or not. The most important six evaluation indicators that can decide to dredge up at erosion control dam were obtained from three round delphi technique and were selected in the following order: the current sand deposit ratio(0.339), existence of cultivated land and house downstream(0.276), the slope of streambed(0.162), the amount of movable soil and gravel(0.118), the history of any disasters(0.063), the basin area(0.043). The weighted score for each evaluation indicator were acquired from AHP analysis with respect to the degree of importance and then the modified weighted score for actual measurements were classified as three categories: large(2.53), medium(1.60) and small(1.01). Based on delphi technique, erosion control dam dredging evaluation fieldbook introduced the four evaluation indicators out of the total six evaluation indicators and two low effected evaluation indicators were excluded. This results showed that the values for reliability analysis and consistency ratio were acceptable.