• Membrane Journal
• /
• v.20 no.4
• /
• pp.342-350
• /
• 2010

Membrane distillation (MD) is a separation process which higher vapor pressure components are evaporated in mixed liquid solution through hydrophobic membrane with 0.1 or $0.5{\mu}m$ pore size. In this study, direct contact membrane distillation process for hollow fiber module were interpreted numerically using the "COMSOL Multiphysics" software. The variables for the system were temperatures and flow rates of lumen and shell side solutions. The permeate flux increased from 1.0 to $3.8L/m^2{\cdot}hr$ as temperature of the feed solution for lumen increased from 30 to $50^{\circ}C$. However the effect of shell solution temperature on permeate flux was relatively low. Also, the optimum velocity of lumen feed was obtained at 0.15 m/s ($Re_L=135$) by considering MD permeate flux as well as operating pressure loss.

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.347-356
• /
• 2017

It is well-known that the face recognition method via sparse representation has been proved very robust and showed good performance. Its weakness is, however, that its time complexity is very high because it should solve $L_1$-minimization problem to find the sparse solution. In this paper, we propose to use the ROMP(Regularized Orthogonal Matching Pursuit) method for the sparse solution, which solves the $L_2$-minimization problem with regularization condition using the greed strategy. In experiments, we shows that the proposed method is comparable to the existing best $L_1$-minimization solver, Homotopy, but is 60 times faster than Homotopy. Also, we proposed C-SCI method for classification. The C-SCI method is very effective since it considers the sparse solution only without reconstructing the test data. It is shown that the C-SCI method is comparable to, but is 5 times faster than the existing best classification method.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.92-96
• /
• 2019

In the presence of ${\mu}-tip$ embedded in a slot-die head for stripe coatings, there arises the capillary flow that limits an increase of the stripe density, which is required for the potential applications in organic light-emitting diode displays. With an attempt to suppress it, we have employed a computational fluid dynamics software and performed simulations by varying the ${\mu}-tip$ length and the contact angles of the head lip and ${\mu}-tip$. We have first demonstrated that such a capillary flow phenomenon (a spread of solution along the head lip) observed experimentally can be reproduced by the computational fluid dynamics software. Through simulations, we have found that stronger capillary flow is observed in the hydrophilic head lip with a smaller contact angle and it is suppressed effectively as the contact angle increases. When the contact angle of the head lip increases from $16^{\circ}$ to $130^{\circ}$, the distance a solution can reach decreases sharply from $256{\mu}m$ to $44{\mu}m$. With increasing contact angle of the ${\mu}-tip$, however, the solution flow along the ${\mu}-tip$ is disturbed and thus the capillary flow phenomenon becomes more severe. If the ${\mu}-tip$ is long, the capillary flow also appears strong due to an increase of flow resistance (electronic-hydraulic analogy). It can be suppressed by reducing the ${\mu}-tip$ length, but not as effectively as reducing the contact angle of the head lip.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.868-869
• /
• 2011

Domestic Foreign automaker's are focused on the high-efficiency, low emission cars development. On the way, the hybrid car is the first priority. Hybrid electric vehicle battery pack configurations, EV Relay one of the key components of the engine driving, to assist in the drive motor to supply electrical energy to the battery is a device for opening and closing of the output device. EV Relay determine the longevity and the replacement cycle, The EV Relay environmental conditions and duty cycle considering the reliability tests are essential requirements of many automotive companies to respond to RFQ, this test is essential. This paper using Maxwell Software for Prediction of the Ev Relay impulse, the theoretical data to obtain the impulse to develop methods for mechanical testing after to take advantage of it.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.9
• /
• pp.676-682
• /
• 2008

Numerical analysis was carried out to examine the heat transfer and pressure drop characteristics of plate heat exchangers for absorption application using Computational Fluid Dynamics(CFD) technique. A commercial CFD software package, FLUENT was used to predict the characteristics of heat transfer, pressure drop and flow distribution within plate heat exchangers. In this paper, a welded plate heat exchanger with the plate of chevron embossing type was numerically analyzed by controlling mass flow rate, solution concentration, and inlet temperatures. The working fluid is $H_2O$/LiBr solution with the LiBr concentration of 50-60% in mass. The numerical simulation shows reasonably good agreement with the experimental results. Also, the numerical results show that plate of the chevron shape gives better results than plate of the elliptical shape from the view points of heat transfer and pressure drop. These results provide a guideline to apply the welded PHE for the solution heat exchanger of absorption systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.5
• /
• pp.189-195
• /
• 2021

This paper discusses choice of loans problem(CLP) that is to minimize annual payment from which bank's borrows in multi-banks multi-nations with distinct interests. For the CLP, there is impossible to obtain the optimal solution actually without the help of mathematical software package as linear programming(LP). This paper applies the method used in transportation problem(TP) that finds initial feasible solution with selects minimum interest first, least cost method(LCM), to CLP. Result of experiment, the proposed algorithm can be obtains the optimal solution with at most two exchange optimization for LCM's initial feasible solution.

• Journal of Convergence Society for SMB
• /
• v.2 no.1
• /
• pp.33-40
• /
• 2012

Recently, embedded environment suffers a huge change, by growth of hardware and turning to be software-controlled. This has improved embedded software complexity. It also brought us the limit of the old development way to resolve the problem. Model-driven development is one solution to solve the limit common software development by previous way, and it became a one uses for embedded environment also. In this paper, we propose model based development approach for embedded software, witch consists of diagram editor and automatic code generator. The diagram editors are implemented by GMF, which include additional functions to solve memory restrictions and concurrent execution problems without OS environment to a automatic code generator. In order to verify the generated code, it will be tested in main control model of UAV by replacing existing module with generated one.

• Journal of The Korean Association of Information Education
• /
• v.21 no.5
• /
• pp.497-507
• /
• 2017

Research on software education and linking and convergence of other subjects has been mainly focused on mathematics and science subjects. The dissatisfaction of various preferences and types of learning personality cause to learning gap. In addition, it is not desirable considering the solution of various fusion problems that can apply the computational thinking. In this way, it is possible to embrace the diverse tendencies and preferences of students through the linkage with the English subject, which is a linguistic approach that deviates from the existing mathematical and scientific approach. By combining similarities in the process of learning a new language of English education and software education. For this purpose, based on the analysis of teaching - learning model of elementary English subject and software education, we developed a class model by modifying existing English subject and software teaching - learning model to be suitable for linkage. Then, the learning elements applicable to software education were extracted from the contents of elementary school English curriculum, and a program applied to the developed classroom model was designed and the practical application method of learning was searched.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.9
• /
• pp.855-862
• /
• 2009

This paper contains the signal receiving algorithm for Galileo E5 AltBOC signal and the development of Galileo E5 signal receiving software. The software runs the process from signal acquisition to extracting measurement data to get navigation solution. It uses logged IF data file as an input. In signal acquisition stage, 1ms and delayed 1ms data are used for reducing correlation ross from secondary code and navigation bit conversion. Signal tracking stage is made of two stages which are coarse tracking and fine tracking. It is for taking advantage of AltBOC characteristic and resolving ambiguity problem due to BOC modulation. The functions of software are verified by signal processing using logged IF data from commercial GNSS simulator.

• The KIPS Transactions:PartD
• /
• v.16D no.6
• /
• pp.899-910
• /
• 2009

Software productivity and quality improvement through software configuration management is based on organized and consistent change management. In change management, artifact identified as configuration item should be able to provide its changed history to the members in group and the members should be able to track down the changes made for the corresponding artifact. General software configuration management systems provide tracking information for artifacts only within the configuration management system, and it does not go further to changes that occur within personal working space. This paper provides a solution that helps tracking down changes that occur not only in configuration management, but also personal artifact's changes through the integration of configuration management system and personal working space. A revised version in configuration management system is connected to the artifact version of the working space by the tagging technique, and traceability can be managed more effectively by sharing the tracking information.