• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.2A
• /
• pp.139-147
• /
• 2008

DVB-S2 (Digital Video Broadcasting-Satellite, Version 2) system transmits frames which adapt their structures based on the channel conditions, thus requiring simultaneous detection of the start of the Same (SoF) and the frame structure at the initial acquisition stage of the receiver. Also, a very low value of the minimum operating signal-to-noise ratio (SNR) for the acquisition necessitates a method utilizing multiple received frames to meet the required performance. In this paper, performance of joint time synchronization and frame structure detection methods using multiple DVB-S2 frames is evaluated by deriving the detection error probability. In particular, we evaluate the performance and complexity variations when the soft- and hard-decision values of the signal correlation output are used, present the synchronization parameters to optimize the performance, and verify the analysis results via computer simulations.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.6
• /
• pp.40-47
• /
• 2009

The lightweight bubble mixture soil is used for soft ground rear-filling material by applying reduced weight on structure. However, comparing with the general soil, it is not applied in domestic because of initial phase cost of construction. General soil, which has lower initial phase cost is usually used for rear-filling, but the use of overlay method of general soil is reduced as the number of layers increases. Especially box structure placed in soft ground or the overlay method when gap near pier rear-filling can be replaced with temporary alternative method, however, it can't be a solution to gap by generation of extra weight of thickness of overlaying. Therefore, execute LCC analysis of two alternative-the general and the lightweight bubble mixture soils, which are rear-filling material of box structure- and present economical analysis in order to make resonable decision from the economics. As a result, although the lightweight bubble mixture soil takes higher initial phase cost than the general soil, it has been analyzed to procure economical efficiency by having less cost of maintenance.

• Archives of Craniofacial Surgery
• /
• v.19 no.3
• /
• pp.235-239
• /
• 2018

Intraoperative expansion has been used to cover small to large defects without disadvantages of the conventional tissue expanders. Various materials, for example, expanders and Foley catheters are being used. We introduce a new, convenient and economical device immediately available in the operating room, according to the defect size for intraoperative expansion, with latex gloves or balloons. The retrospective study was done with 20 patients who presented with skin and soft tissue defects. During the operation, expansion was done with latex gloves or balloons inflated with saline through an intravenous line and a three-way stopcock. After the inflation, the glove was removed and skin was covered with expanded tissue. A careful decision was made regarding the inflation volume and placement of the expander according to the defect size. There were no postoperative complications. The skin contracture and tension was minimal with a texture similar to the adjacent tissue. The new intraoperative expansion devices with latex gloves and balloons were cheap and made easily right in the operation room. The reconstruction of small to large sized skin defects can be done successfully, functionally and aesthetically without using expensive commercial materials.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.9
• /
• pp.1654-1665
• /
• 2008

This paper presents bit splitting methods to apply multilevel modulation to iterative codes such as turbo code, low density parity check code and turbo product code. Log-likelihood ratio method splits multilevel symbols to soft decision symbols using the received in-phase and quadrature component based on Gaussian approximation. However it is too complicate to calculate and to implement hardware due to exponential and logarithm calculation. Therefore this paper presents Euclidean, MAX, sector and center focusing method to reduce the high complexity of LLR method. Also, this paper proposes optimal soft symbol split method for three kind of iterative codes. Futhermore, 16-APSK modulator method with double ring structure for applying DVB-S2 system and 16-QAM modulator method with lattice structure for T-DMB system are also analyzed.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.725-731
• /
• 2009

Construction documents are recognized as an essential component for making a decision and supporting on construction processes. In construction, the management of project document is a complex process due to different factors such as document types, stakeholder involvement, document flow, and document flow processes. Therefore, inappropriate management of project documents can cause several impacts on construction work processes such as delay or poor quality of work. Several information and communication technologies (ICT) were proposed to overcome problems concerning document management practice in construction projects. However, the adoption of ICT may have some limitation on the compatibility of specific document workflow. Lack of understanding on designing document system may cause many problems during the use and implementation phase. Thus, this paper proposes the framework that integrates Soft System Methodology (SSM) concept and Integrated Definition Modeling Technique (IDEF) for analyzing document management system in construction project. Research methodology is classified as the case study. Five main construction building projects are selected as case studies. The qualitative data related to problems and processes are collected by interviewing construction project participants such as main contractors, owners, consultants, and designers. The findings from case study show the benefits of using SSM and IDEF. The use of SSM can help identify the problems in managing construction document in rich picture view whereas IDEF can illustrate the document flow in construction project in details. In addition, the idea of integrating these two concepts can be used to identify the root causes of process problems at the information level. As the results, this idea can be applied to analyze and design web-based document management system in the future.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.66-75
• /
• 2002

For the theoretical performance analysis of Viterbi Decoder for wireless LAN with data rate 12Mbps, code rate 1/2 and constraint length 7 defined in IEEE 802.11a, the transfer function is derived using Cramer's rule and the first-event error probability and bit error probability is derived under the AWGN. In the design process, input symbol is quantized into 16 steps for 4 bit soft decision and register exchange method instead of memory method is proposed for trace back, which enables the majority at the final decision stage. In the implementation, the Viterbi decoder based on parallel architecture with pipelined scheme for processing 12Mbps high speed data rate and AWGN generator are implemented using FPGA chips. And then its performance is verified in real time.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.8
• /
• pp.51-61
• /
• 2011

Spatial estimation of the thickness and depth of the geological profile has been regarded as an important procedure for the design of soft ground. A minimum variance criterion, which has often been used in traditional kriging techniques, does not always guarantee the optima1 estimates for the decision-making process in geotechnical engineering. In this study, a geostatistica; framework is used to determine the optimal thickness of the consolidation layer and the optimal area that needs the adoption of prefabricated vertical drains via indicator kriging and loss function. From the exemplary problem, different optimal estimates can be obtained depending on the loss function chosen. The design procedure and method considering the minimum expected loss presented in this paper can be used in the decision-making process for geotechnical engineering design.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.293-298
• /
• 2007

A new way to integrate various geophysical information for evaluation of RQD was developed. In this study, we does not directly define the RQD value where borehole data are not sampled. Instead, we infer the probability of RQD values with prior probability of data directly obtained from borehole, and secondary supporting probability from resistivity and seismic tomography data. First, we applied the geostatstical indicator kriging to get prior probability of RQD value, and indicator kriging with soft data to get the supporting probability from resistivity and seismic data. And we finally applied the permanence ratio rule to integrate these information. The finally obtained result was also analyzed to fully utilize the probabilistic features. For example, we showed the probability of wrongly classifying the RQD evaluation and vice versa. This kind of analytical result may be used for decision making process based on the geophysical exploration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.10
• /
• pp.1100-1108
• /
• 1992

The evaluation of coded error probabilities for antijam communication systems is usually difficult to do and, thus, easy-to-evaluate upper bounds are used. Since it is relatively easy to evaluate the cutoff rate for the coding channel, the coded bit error bounds for most antijam systems of interest can be easily expressed directly in terms of this cutoff rate parameter using the relationship between the bit error bounds and cutoff rate for AWGN channel. The key feature of these bounds is the decoupling of the coding aspects of the system from the remaining part of the communication system which includes jamming, suboptimum detectors, and arbitrary decoding metrics which may or may not use jammer state knowledge. In this paper the bit error bounds for the Trumpis coded FH/MFSK with an AWGN channel are translated into the corresponding bit error bounds for boradband and partial band noise jammer. And the impact of the side information about jammer state is also evaluated with these upper bounds. Although it is considered for the soft decision detector, it is also applicable to the hard decision detector.

• Journal of Korean Ophthalmic Optics Society
• /
• v.19 no.3
• /
• pp.285-293
• /
• 2014

Purpose: In order to find suitable size of soft contact lens for different ages group of elementary student to adults, visible iris diameter(horizontal, vertical) and palpebral aperture size were measured. Methods: Visible iris diameter (horizontal, vertical) and palpebral aperture size were measured in different age groups of total 514 subjects (1028 eyes) who have no eye disease and none history of surgery included cosmetic purpose. Results: No significant difference was found in iris diameter of both horizontal and vertical direction for different groups of age and sex but horizontal direction of palpebral aperture size in middle school students and university students groups and vertical direction of palpebral aperture size in high school student group shows significant difference (p<0.05) by sex. Horizontal visible iris diameter, vertical visible iris diameter, horizontal palpebral aperture size and vertical palpebral aperture size shows significant difference in difference age and sex. Conclusions: Visible iris diameter and palpebral aperture size are affective factor for soft contact lens diameter decision, especially it should considered more intensive for removing uncomfortable feeling of lens wearer.