• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.27-40
• /
• 1993

High temperature tensile tests, steady state creep tests, Internal stress tests and creep rupture tests using A17075 alloy( $T_{6}$ ) were performed over the temperature range of 9$0^{\circ}C$~50$0^{\circ}C$ (0.4 $T_{m}$ ~0.85 $T_{m}$ ) and stress range of 0.64~17.2(kgf/$\textrm{mm}^2$). The main results obtained in this paper were as follows. (1) The activation energies for yielding at the temperature of 0.4 $T_{m}$ ~0.75 $T_{m}$ were calculated to be 25.7~36.5kcal/mol, which were nearly equal to the activation energies for creep. (2) At around the temperature of 9$0^{\circ}C$~12$0^{\circ}C$ and under the stress level of 10~17.2(kgf/$\textrm{mm}^2$), and at around the temperature of 200~41$0^{\circ}C$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$) and again at around the temperature of 470~50$0^{\circ}C$ and under the stress level of 0.62~l.02(kgf/$\textrm{mm}^2$), the applied stress dependence of steady state creep rate $n_{measu}$ measured were, respectively, 3.15, 6.62 and 1.1, which were in good agreement the calculated stress dependence $n_{ealeu}$ obtained by the difference of the applied stress dependence of the Internal stress and the ratio of the internal stress to the applied stress. (3) At the temperature range of 0.4~0.43 $T_{m}$ , and at the temperature range of 0.52~0.75 $T_{m}$ and again at the temperature range of 0.82~0.85 $T_{m}$ , the activation energies $Q_{measu}$ obtained by steady state creep rate, respective, 26. 16, 34.9, 36.2 and 36.1kcal/mol, which were in good agreement with those obtained with the activation energies under constant effective stress and the temperature dependence of Internal stress. (4) At the temperature range of the 0.52~0.73 $T_{m}$ and under the stress level of 1.53~9.55(kgf/$\textrm{mm}^2$), the stress dependence of rupture life(n’) measured was 6.3~6.6, which was in good agreement with the stress dependence of steady state creep rate(n). And at the same condition the activation energy for rupture( $Q_{f}$ ) measured was 32.0~36.9kca1/mol, which was also in good agreement with the activation energy obtained by steady state creep rate ( $Q_{c}$ ). (5) The rupture life( $t_{f}$ ) might be represented by athermal process attributed to the difference of the applied stress dependence of the internal stress and the ratio of the internal stress to the applied stress, and the thermal activated process attributied to the temperature dependence of the internal stress as $t_{f}$ = A'$\sigma$$_{a}$ ｛n(1-d $\sigma$$_{i}$ /d $\sigma$$_{a}$ )/(1-$\sigma$$_{i}$ / $\sigma$$_{a}$ )｝.exp[｛ $Q_{c}$ $^{*}$-( $n_{o}$ R $T^2$/ $E_{(T)}$) (d $E_{(T)}$/dT) - ( $n_{0}$ R $T^2$/ $\sigma$$_{a}$ - $\sigma$$_{i}$ ) (d $\sigma$$_{i}$ /dT)｝/RT]. (6) The relationship betwween Larson-Miller rupture parameter and logarithmic stress was linearly decreased, so creep rupture life of Al 7075 alloy seemed to be predicted exactly with Larson-Miller parameter.meter.

• Journal of Korean Society of Forest Science
• /
• v.80 no.3
• /
• pp.279-286
• /
• 1991

This study was carried out to investigate relationships between atmospheric $SO_2$ concentration and both soluble sulphur contents in the tree leaves and bark pH to test the possibility of using them as bioindicators for air pollution. Mt. Kwanak, Mt. Nam, Mt. Bukhan (located in Seoul) and Mt. Paldal (located in Suwon, Kyonggi-do) as polluted areas and Pyongchang, Kwangwon-do as an unpolluted area were selected for this study. Soluble sulphur contents in the leaves and hark pH of two tree species (Pines densiflora S. et Z. and Quercus mongolica Fisch.) were analyzed in May, August, and October, 1990 by $BaSO_4$ precipitation method and pH measurement, respectively. In both species, concentration of soluble sulphur in the leaves increased with increasing concentration of atmospheric $SO_2$ (correlation coefficient : 0.52). Soluble sulphur contents in the 2-year-old needles of Pines densiflora (0.170%) and current year leaves of Quercus mongolica (0.081%) in Mt. Nam in the center of Seoul were higher than those in unpolluted Pyongchang area (0.023% and 0.034%, respectively). Bark pH decreased with increasing atmospheric $SO_2$ concentration (correlation coefficient : -0.52). Bark pH of P. densiflora (pH 3.42) and Q. mongolica (pH 3.63) in Mt. Nam were lower than those in Pyongchang area (pH 3.94 and pH 4.93, respectively). Both soluble S content in the leaves and bark pH were recognized as suitable bioindicators for air pollution by $SO_2$. Especially, bark pH showed more sensitive response to air pollution by $SO_2$ than soluble S concentration in the leaves. The lowest concentration of soluble sulphur and the highest bark pH in August were considered to be due to heavy rain during the rainy season. Soluble S content in the leaves and bark pH were not significantly different at 5% level between the two species in polluted areas.

• Korean Journal of Soil Science and Fertilizer
• /
• v.46 no.6
• /
• pp.659-664
• /
• 2013

The aim of this study is to determine the drought stress index through photochemical analysis in red pepper (Capsiumannuum L.). The photochemical interpretation was performed in the basis of the relation between Kautsky effect and Photosystem II (PSII) following the measurement of chlorophyll, pheophytin contents, and $CO_2$ assimilation in drought stressed 5-week-old red pepper plants. The $CO_2$ assimilation rate was severely lowered with almost 77% reduction of chlorophyll and pheophytin contents at four days after non-irrigation. It was clearly observed that the chlorophyll fluorescence intensity rose from a minimum level (the O level), in less than one second, to a maximum level (the P-level) via two intermediate steps labeled J and I (OJIP process). Drought factor index (DFI) was also calculated using measured OJIP parameters. The DFI was -0.22, meaning not only the initial inhibition of PSII but also sequential inhibition of PSI. In real, most of all photochemical parameters such as quantum yield of the electron transport flux from Quinone A ($Q_A$) to Quinone B ($Q_B$), quantum yield of the electron transport flux until the PSI electron acceptors, quantum yield of the electron transport flux until the PSI electron acceptors, average absorbed photon flux per PSII reaction center, and electron transport flux until PSI acceptors per cross section were profoundly reduced except number of QA reducing reaction centers (RCs) per PSII antenna chlorophyll (RC/ABS). It was illuminated that at least 6 parameters related with quantum yield/efficiency and specific energy fluxes (per active PSII RC) could be applied to be used as the drought stress index. Furthermore, in the combination of parameters, driving forces (DF) for photochemical activity could be deduced from the performance index (PI) for energy conservation from photons absorbed by PSII antenna until the reduction of PSI acceptors. In conclusion, photochemical responses and their related parameters can be used as physiological DFI.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.55-55
• /
• 2009

Silicon Carbide (SiC) is a material with a wide bandgap (3.26eV), a high critical electric field (~2.3MV/cm), a and a high bulk electron mobility (${\sim}900cm^2/Vs$). These electronic properties allow high breakdown voltage, high frequency, and high temperature operation compared to Silicon devices. Although various SiC DMOSFET structures have been reported so far for optimizing performances. the effect of channel dimension on the switching performance of SiC DMOSFETs has not been extensively examined. In this paper, we report the effect of the interface states ($Q_s$) on the transient characteristics of SiC DMOSFETs. The key design parameters for SiC DMOSFETs have been optimized and a physics-based two-dimensional (2-D) mixed device and circuit simulator by Silvaco Inc. has been used to understand the relationship with the switching characteristics. To investigate transient characteristic of the device, mixed-mode simulation has been performed, where the solution of the basic transport equations for the 2-D device structures is directly embedded into the solution procedure for the circuit equations. The result is a low-loss transient characteristic at low $Q_s$. Based on the simulation results, the DMOSFETs exhibit the turn-on time of 10ns at short channel and 9ns at without the interface charges. By reducing $SiO_2/SiC$ interface charge, power losses and switching time also decreases, primarily due to the lowered channel mobilities. As high density interface states can result in increased carrier trapping, or recombination centers or scattering sites. Therefore, the quality of $SiO_2/SiC$ interfaces is important for both static and transient properties of SiC MOSFET devices.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.6
• /
• pp.371-377
• /
• 2017

The performance of an air conditioner is closely related to the cooling performance of a split-type outdoor unit so that, in most of the relevant preceding studies, the independent performance of an axial fan in an outdoor unit has been studied. However, there is a lack of research on the effects of other components in an outdoor units was rarely investigated. Therefore, in this paper, the effects of the fan orifice among other parts on the flow performance of the outdoor unit was numerically investigated. A virtual fan tester consisting of 18 million grids was developed for highly resolved flow simulation. The unsteady RANS (Reynolds-averaged Navier-Stokes) equations are numerically solved by using finite-volume CFD (Computational Fluid Dynamics) techniques. In order to verify the validity of the numerical methods, the predicted P-Q curve of the cooling fan in a full outdoor unit is compared with the measured one. Optimization of orifice shape was carried out for maximum flow performance of the outdoor unit using the validated numerical method.

• Korean Journal of Food Science and Technology
• /
• v.43 no.1
• /
• pp.6-11
• /
• 2011

Vinyl chloride (VC) and vinylidene chloride (VDC), which may be present in poly(vinyl chloride) (PVC) and poly(vinylidene chloride) (PVDC) food packaging, were analyzed by using a headspace-gas chromatograph (GC)/mass spectrometer (MS) equipped with a PLOT Q column. 1-Chloropropane (1-CP) was used as an internal standard. The determinations of VC and VDC were carried out by monitoring the characteristic ions for each compound: m/z=61, 62, 64 and m/z=61, 96, 98, respectively. The method validated in this study can be suitable for the compliance test of EU regulation. Among 103 food packaging samples, VC and VDC were not detected, except in one PVDC food package. However, the detected level of VDC in the sample was below the EU regulatory specific limitation.

• Journal of Applied Biological Chemistry
• /
• v.53 no.2
• /
• pp.99-104
• /
• 2010

The influences on antioxidant activities of the substituents ($R_1-R_4$) on benzo ring in 4-Methyl-2H-benzopyran-2-one analogues (1-23) were discussed quantitatively using three dimensional quantitative structure-activity relationships (3D-QSARs: Comparative molecular field analyses (CoMFA) and Comparative molecular similarity indice analyses (CoMSIA)) methods. The statistical qualities of CoMSIA models were better than those of CoMFA models and the CoMSIA 2 model was optimized model ($q^2$=0.700 & $r^2$=0.979). Also, the contribution ratios (%) of the optimized CoMSIA 2 model were H-bond donor field 43.5%, electrostatic field 41.8% and steric field 14.7% so that the antioxidant activity exhibited a strong correlation with H-bond donor and electrostatic factor of molecules. From the analytical results of the CoMSIA contour maps, if the positive charge favor group and H-bond donor disfavor group were placed in the $R_1-R_4$ positions on the benzo ring, it was predicted that the groups would raised the antioxidant activity.

• Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.126-142
• /
• 2020

Background: Most of the Pinus densiflora forests, occupying the largest area, have been restored in South Korea since the 1970s. As young pioneer forests, the succession process is under way. Since the forests are distributed nationwide and are vulnerable to disturbances, the process may differ depending on the geography and/or site conditions. Therefore, we reviewed the direction, the seral communities, and the late-successional species of progressive and disturbance-driven succession nationwide in the cool-temperate zone through meta-analysis and empirical observations. Main text: As a result of a meta-analysis of the direct succession and vertical structure, we found that the P. densiflora forest is in a directionally progressive succession, changing to the broadleaved forest after forming a mixed forest with its overwhelming successor, Quercus species (particularly Q. mongolica and Q. serrata). In dry stands in a relative sense, the Quercus species was favored occupying over 80% of the abundance of the succeeding species. Therefore, in dry stands, it is presumed that Quercus-dominated stage would last for a long time due to the current dominance and long life span, and eventually, it settles as Quercus-broadleaved forest with a site change. Contrary to this, it is presumed that in mesic stands where Quercus species do not occur or have low abundance, the late-successional broadleaved species settle early to form a co-dominant forest with multiple species. Due to geographical limits, the species composition of the two late-successional forests is different. Disturbances such as insect pests and fire retrogressed vulnerable P. densiflora forest for a while. However, it was mostly restored to the Quercus forest and is expected to be incorporated in the pathway of the dry stand. Conclusions: We revealed the succession process of P. densiflora forests according to geography and moisture and found that stand moisture had a decisive effect on the species and abundance of the successor. Although the P. densiflora forest is undergoing structural changes, the forest is still young; so within a few decades, physiognomy is not likely to change. Therefore, the decrease in the forest area may be due to other causes such as disturbances and forest conversion rather than due to succession.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.273-282
• /
• 2020

This study analyzed the physiological effects of silkworms and silkworm pupae on the reduction of serum lipid levels. Research data specific to silkworms and their pupae published over the last 10 years were collected and analyzed. A large effect size of 0.852 was observed in the overall results and the range of 95% confidence intervals was 0.662 to 0.999. The Q value was 23.264, the Higgin's I² value was 92.217, indicating that each study was heterogeneous. There was no publication bias, as the corrected observed number of statistically significant effect sizes and the expected number of statistically significant effect sizes were both 0.654. The silkworm study showed a large effect size with respect to blood sugar and blood lipid reduction at 0.801 and 0.948, respectively, and LDL-cholesterol reduction at 1.371, showing a very large effect size. Aspartate transaminase / glutamic oxaloacetic transaminase (AST/GOT) was 0.768, alanine transaminase /glutamate-pyruvate transaminase (ALT/GPT) was 0.788, which was a medium effect size. The experiment period had a very large effect size of 1.170 for five to eight weeks and 1.020 for an intake of 1 to 50 mg/kg. The silkworm pupae had a large effect size of 0.991 and 0.951, respectively on blood lipids and total cholesterol reduction. The experimental period showed a very large effect size at 1.103 for more than nine weeks, and the intake showed a large effect size at 0.855 for 5001 mg/kg.

• Journal of Korean Society of Environmental Engineers
• /
• v.30 no.5
• /
• pp.491-499
• /
• 2008

It is really urgent to develop wastewater treatment system which is economically efficient, occupies small area for buildup, can be easily operated, discharges small amount of sludge due to the more strict water quality standard, the expensive water and energy cost and so on. This study on treatment of wastewater including nonbiodegadable materials using white-rot fungus biofilm were designed to investigate the submerged type of biofilm, hydraulic retention times, recycle rates, and module turning times. Removal efficiencies of fully exposed biofilm type in atmosphere are similar to submerged biofilm of aeration type. The optimum conditions of white-rot fungus biofilm of fully exposed type in atmosphere are HRT 3$\sim$4 hr, recycle rate 6$\sim$10 Q, module turning times 0.5$\sim$2 times/min. At this time, removal efficiencies of organics were COD$_{Cr}$ 65.0$\sim$69.9%, NBDCOD 70.4$\sim$72.7%, BOD$_5$ 88.8$\sim$90.1%, SS 84.2$\sim$90.4%. Moreover average effluent concentration of BOD$_5$(8.9 mg/L) satisfied water quality standard of heavy water(BOD$_5$ less than 10 mg/L) but concentration of NBDCOD(29.6 mg/L) was higher than water quality standard of heavy water(NBDCOD less than 20 mg/L).