• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.803-808
• /
• 2011

The shipboard working environment of navy vessel is very inferior to the ground working environment. For this reason, the crew of a navy vessel suffer from an occupational disease such as lumbar pain, hearing loss, etc. Although standard for navy vessel's environmental vibration is applied, the criterion of the environmental vibration is too high. So it doesn't help to improve habitability of crew. In this study, for improving its habitability of crew, the current vibration level of navy vessel was examined and the standard of navy vessel's environmental vibration was investigated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.797-802
• /
• 2011

Vibration of diesel engines in naval vessels causes structure vibration which is significant under water radiating noise source under CIS (Cavitation Inception Speed). So managing the vibration level of diesel engine is important for survivability and also durability of naval vessels. Therefore, in this research, a vibration criterion which is applied for Korean naval vessels are reviewed. It is compared with the DNV, ABS and merchant ship's diesel engine criteria. And also vibration data of three Korean naval vessels are analyzed. As a result, reasonable criteria of diesel engine vibration and shipbuilding standards are suggested.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.05a
• /
• pp.189-191
• /
• 2019

우리나라 선원은 해방기 이후 외화가득의 주역이며 비상시 군수물자를 운송할 수 있는 사회경제적으로 가치 있는 직업이나 최근 선원 직업의 사회적 인식이 다소 부정적이고, 예전처럼 젊은 선원의 유입이 높지 않은 편이다. 본 연구는 일반 대중을 대상으로 Q 방법론을 활용하여 선원의 직업을 어떻게 인식하는지 그 이미지 유형과 특성을 분석하였다. Q 방법론에 의한 선원 직업 이미지 인식은 3개 유형으로 분류되었고 우리나라 선원에 대한 대중의 인식은 부정적이였다. 이러한 연구 결과를 바탕으로 해운산업의 핵심 인적자원인 선원의 안정적으로 확보하고 선원 종사자들의 직업적 만족도와 취업률을 높이기 위해서는 대중들이 인식한 선원의 부정적 직업 이미지를 전환할 수 있는 다양한 방안을 마련해야 할 것이다.

• Journal of Korean Neurosurgical Society
• /
• v.63 no.5
• /
• pp.579-589
• /
• 2020

Objective : No optimum genetic rat Huntington model both neuropathological using an adeno-associated virus (AAV-2) vector vector has been reported to date. We investigated whether direct infection of an AAV2 encoding a fragment of mutant huntingtin (AV2-82Q) into the rat striatum was useful for optimizing the Huntington rat model. Methods : We prepared ten unilateral models by injecting AAV2-82Q into the right striatum, as well as ten bilateral models. In each group, five rats were assigned to either the 2×10¹² genome copies (GC)/mL of AAV2-82Q (×1, low dose) or 2×10¹³ GC/mL of AAV2-82Q (×10, high dose) injection model. Ten unilateral and ten bilateral models injected with AAV-empty were also prepared as control groups. We performed cylinder and stepping tests 2, 4, 6, and 8 weeks after injection, tested EM48 positive mutant huntingtin aggregates. Results : The high dose of unilateral and bilateral AAV2-82Q model showed a greater decrease in performance on the stepping and cylinder tests. We also observed more prominent EM48-positive mutant huntingtin aggregates in the medium spiny neurons of the high dose of AAV2-82Q injected group. Conclusion : Based on the results from the present study, high dose of AAV2-82Q is the optimum titer for establishing a Huntington rat model. Delivery of high dose of human AAV2-82Q resulted in the manifestation of Huntington behaviors and optimum expression of the huntingtin protein in vivo.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.2
• /
• pp.157-163
• /
• 2006

Investigation of Cd and Zn availability in four different soils as affected by the interactions of these two heavy metals was conducted using the metal desorption quantity-intensity (Q/I) isotherms. The soils were artificially contaminated with proper concentrations of Cd and Zn as $CdSO_4\;and\;ZnSO_4$ solutions. DTPA (diethylene triamine pentaacetic acid) - extractable and water-extiactable Cd or Zn from the soils were used as $Q_{Cd}\;or\;Q_{Zn}\;and\;I_{Cd}\;or\;I_{Zn}$ factors, respectively. The coefficient of determination for Cd and Zn desorption Q/I linear regression in the soils ranged from 0.947 to 0.999, which indicated that Q and I factors were closely correlated. The buffering capacity of Cd, $BC_{Cd}$, in the soils decreased with increasing Zn treatments, and the $BC_{Cd}$ values were ranged between 205.8 and 2255.6. The decreases of $BC_{Cd}$ values were mainly dependent upon the increases of $I_{Cd}$ factors. However, Zn buffering capacity. $BC_{Zn}$ decreased with increasing Cd treatments in acidic soils, and increased in neutral and calcareous alkaline soils. The $BC_{Cd}$ values were ranged from 143.2 to 6158.0. The values of $BC_{Zn}$ as influenced by the treatments of Cd were also controlled by the solubility of water-extractable Zn, $I_{Zn}$ factor. The solubility of water-extractable Cd and Zn was significantly dependent upon the changes of soil pH that were impacted by the treatment of Zn and Cd, respectively. Also, the availability of Cd was higher than Zn availability in the acidic and neutral soils, but Zn was higher than Cd in the calcareous alkaline soil.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.63-70
• /
• 2005

Various schemes for mobility are currently studied in ITU-T, 3GPP, IETF, and so on. Mobility support in NGN for seamless service is necessarily required. Currently proposed mechanisms are MIPv6, $IP^2$, and Q.MMF. However the performance comparison of all existing schemes is not examined as yet. That is, the existing methods need to be compared according to each performance parameter. So, in this paper, we investigate and compare the performances of MIPv6, $IP^2$, Q.MMF to location registration. In addition, this paper presents the performance comparison of handover latency times. For this, we use NS-2 simulator. As a result of analysis, $IP^2$ shown the best performance as it is measured the minimum time and cost. And it has low handover latency time in comparison with other mechanisms.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.4
• /
• pp.23-28
• /
• 1974

One of the consistent nuisances in accurate design of circuits containing coils with core is how to take into account the frequency dependence of Q of actual coils. The conventional equivalent circuit consisting of an inductance and a series (constant) resistance and possibly a parallel (constant) capacitance is of little use in this situation since the core loss itself is strongly dependent on the frequency. In order to circumvent this difficulty, in this paper, a mathematical expression for Q of a given core as a function of inductance and frequency is first assumed and parameters in this expression are optimiged so as to best fit the data provided by the core manufacturer or obtained experimentally. This expression is then utilized in accurate calculation of the frequency response of a given circuit required in the optimal design of circuits containing coils. In other words the proposed approach is an effective combination of an approximate expression of coil's Q and circuit optimisation technique, which seems to have solved, to a great extent, the stated difficulty associated with actual coils. As for the optimization technique, ths Fletcher-Powell procedure was employed and one example was given to illustrate the proposed approach.

• Journal of Internet Computing and Services
• /
• v.12 no.3
• /
• pp.77-88
• /
• 2011

In distributed cognitive radio networks, cognitive radio devices which perform the channel sensing individually, are seriously affected by radio channel environments such as noise, shadowing and fading such that they can not property satisfy the maximum allowable interference level to the primary user. In the paper, we propose a Q-learning based channel access scheme for cognitive radios so as to satisfy the maximum allowable interference level to the primary user as well as to improve the throughput of cognitive radio by opportunistically accessing on the idle channels. In the proposed scheme, the pattern of channel usage of the primary user will be learned through Q-learning during the pre-play learning step, and then the learned channel usage pattern will be utilized for improving the sensing performance during the Q-learning normal operation step. Through the simulation, it is shown that the proposed scheme can provide bettor performance than the conventional energy detector in terms of the interference level to primary user and the throughput of cognitive radio under both AWGN and Rayleigh fading channels.

• Journal of Korea Game Society
• /
• v.7 no.4
• /
• pp.105-116
• /
• 2007

Nowadays, learning of agents gets more and more useful in game environments. But it takes a long learning time to produce satisfactory results in game. So, we need a good method to shorten the learning time. In this paper, we present a strategy for improving the learning performance of Q-learning with prediction information. It refers to the chosen action at each status in the Q-learning algorithm, It stores the referred value at the P-table of prediction module, and then it searches some values with high frequency at the table. The values are used to renew second compensation value from the Q-table. Our experiments show that our approach gets the efficiency improvement of average 9% after the middle point of learning experiments, and that the more actions in a status space, the higher performance.

• Journal of agriculture & life science
• /
• v.45 no.6
• /
• pp.47-55
• /
• 2011

This study investigated mineral element concentrations of acorns in Quercus acutissima and Quercus serrata seed orchard, so that to estimate the variation of these species based on the chemical composition in different clones from plus trees. The acorns were collected from ten clones of each species grown in the same clonal seed orchard. The nutritional concentration of acorns was significantly different between the clones and species. The concentration of nutrient for the whole acorn followed in this general sequence: P > K > Na > Mg > Ca > Mn > Fe > Zn > Cu. The mineral concentrations of acorns in clones of Q. acutissima and Q. serrata contained P (494 to 684 and 541 to 672 mg/100 g), K (114 to 569 and 140 to 251 mg/100 g), Na (57 to 121 and 49 to 85 mg/100 g), Mg (29 to 37 and 26 to 42 mg/100 g), Ca (10 to 53 and 26 to 68 mg/100 g), Mn (0.5 to 3.4 and 1.8 to 4.5 mg/100 g), Fe (0.7 to 1.1 and 0.0 to 2.2 mg/100 g), Zn (0.34 to 0.81 and 0.38 to 0.84 mg/100 g), and Cu (0.13 to 0.40 and 0.09 to 0.34 mg/100 g) respectively. Even though acorns of Q. serrata are smaller in size than Q. acutissima, acorns of Q. serrata contained significantly higher concentration of phosphorus, calcium, iron and manganese than Q. acutissima. Based on the mineral composition of the acorns, this study has shown that the clones of Q. acutissima and Q. serrata have different ability to accumulate mineral nutrients which could indicate the variation of Quercus species in terms of mineral acquisition and accumulation.