• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.9
• /
• pp.50-57
• /
• 2011

Conventional bus system architectures are composed of several components such as master, arbiter, decoder and slave modules. The arbiter plays a role in bus arbitration according to the selected arbitration method, since several masters cannot use the bus concurrently. Typical priority strategies used in high performance arbiters include static priority, round robin, TDMA and lottery. Typical arbitration algorithms always consider the bus priority primarily, while the bus utilization is always ignored. In this paper, we propose an arbitration method using bus utilization for the operating block of each master. We verify the performance compared with the other arbitration methods through the TLM(Transaction Level Model). Based on the performance verification, the conventional fixed priority and round-robin arbitration methods cannot set the bus utilization. Whereas, in the case of the conventional TDMA and lottery arbitration methods, more than 100,000 cycles of bus utilization can be set by the user, exhibiting differences of actual bus utilization up to 50% and 70%, respectively. On the other hand, we confirm that for the proposed arbitration method, the matched bus utilization set by the user was above 99% using approximately 1,000 cycles.

• Journal of information and communication convergence engineering
• /
• v.6 no.4
• /
• pp.376-382
• /
• 2008

Developing highly cost-efficient and reliable embedded systems demands hardware/software co-design and co-simulation due to fast TTM and verification issues. So, it is essential that Platform-Based SoC design methodology be used for enhanced reusability. This paper addresses a reusable SoC platform based on OpenCores soft processor with reconfigurable architectures for hardware/software codesign methodology. The platform includes a OpenRISC microprocessor, some basic peripherals and WISHBONE bus and it uses the set of development environment including compiler, assembler, and debugger. The platform is very flexible due to easy configuration through a system configuration file and is reliable because all designed SoC and IPs are verified in the various test environments. Also the platform is prototyped using the Xilinx Spartan3 FPGA development board and is implemented to a single chip using the Magnachip cell library based on $0.18{\mu}m$ 1-poly 6-metal technology.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.6
• /
• pp.324-332
• /
• 2005

In general, bus system consumes a very significant portion of power in a chip. Bus splitting can be used to reduce the energy dissipation and to reduce the Propagation delay on the bus by lowering the parasitic load of each bus segment. Data exchange probability distribution between a set of interconnected processing elements affects the average energy dissipation of the splitted bus architectures. In this research, we have developed tree-based bus splitting techniques and design methodologies, as an extension of horizontally aligned bus splitting. We have developed the methodology to select near-optimal bus architectures for low energy dissipation when data exchange probability distribution of a system is given. Experimental results show that the proposed techniques can reduce energy dissipation on the bus by up to 83$\%$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.63-65
• /
• 2021

This paper describes an integrated H/W-S/W implementation of elliptic curve digital signature algorithm (EC-DSA) using a security system-on-chip (SoC). The security SoC uses the Cortex-A53 APU as CPU, and the hardware IPs of high-performance elliptic curve cryptography (HP-ECC) core and SHA3 (secure hash algorithm 3) hash function core are interfaced via AXI4-Lite bus protocol. The signature generation and verification processes of EC-DSA were verified by the implementation of the security SoC on a Zynq UltraScale+ MPSoC device.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1548-1555
• /
• 2011

In ultra-deep submicron technology, minimization of propagation delay and power consumption on buses is one of the most important design objectives in system-on-chip (SOC) design. Crosstalk between adjacent wires on the bus may create a significant portion of propagation delay. Elimination or minimization of such faults is crucial to the performance and reliability of SOC designs. Most of the previous works on bus encoding are targeted either to minimize the bus switching or minimize the crosstalk delay, but not both. This paper proposes a new bus encoding scheme which can adaptively select one of functions "invert" and "logic-convert" according the number of bus switching on an encoded 4-bit cluster. This scheme leads to minimization of both crosstalk and bus switching. In experiment result, our proposed encoding technique consumes about 25% less power over the previous, while completely eliminating the crosstalk delay.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.2
• /
• pp.70-75
• /
• 2014

Recently, the demand for high-integrated, low-powered, and high-powered SoC design has been increasing due to the multi-functionality and the miniaturization of digital devices and the high capacity of service informations. With the rapid evolution of the system, the required hardware performances have become diversified, the FPGA system has been increasingly adopted for the rapid verification, and SoC system using the FPGA and the ARM core for control has been growingly chosen. While the AXI bus is used in these kinds of systems in various ways, it is traditionally designed with AXI slave structure. In slave structure, there are problems with the CPU resources because CPU is continually involved in the data transfer and can't be used in other jobs, and with the decreased transmission efficiency because the time not used of AXI bus beomes longer. In this paper, an efficient AXI master interface is proposed to solve this problem. The simulation results show that the proposed system achieves reductions in the consumption clock by an average of 51.99% and in the slice by 31% and that the maximum operating frequency is increased to 107.84MHz by about 140%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.137-146
• /
• 2005

IP-based design methodology has been popularly employed for SoC design to reduce design complexity and to cope with time-to-market pressure. Interface modules for communication between system buses and IPs are required, since many IPs employ different protocols. Automatic generation of these interface modules would enhance designer's productivity and IP's reusability. This paper proposes an automatic interface generation system based on FSM generated from the protocol description of IPs. The proposed system provides the library modules for the standard buses to reduce the burdens of describing the protocols for data transfer from/to standard buses. Experimental results show that the area of the interface circuits generated by the proposed system had been increased slightly by 4.5% on the average when compared to manual designs. In the experiment, where bus clock is 100 Mhz and slave module clock is 34 Mhz, the latency of the interface had been increased by 7.1% in burst mode to transfer 16 data words. However, occupation of system bus can be reduce by 64.9%. A chip designer can generate an interface that improves the efficiency of system bus, by using this system.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.810-813
• /
• 2008

본 논문에서 연구하고 구현된 JTAG(Joint Test Action Group) Writer는 하나의 SoC(System On a Chip)만 지원하도록 설계된 기존 제품의 단점을 보완할 수 있도록 각 SoC의 제조 회사에서 제공하는 BSDL(Boundary Scan Description Language)을 이용하여 여러 가지 SoC에 쉽게 사용할 수 있도록 모듈화 했다. 그리고 기존 제품들이 사용하고 있는 직렬 포트나 병렬 포트 대신 안정적이고 편리한 USB(Universal Serial Bus) 접속규격을 지원하도록 개선했다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.11
• /
• pp.2433-2438
• /
• 2011

Bus system consists of several masters, slaves, arbiter and decoder in a bus. Master means the processor that performs data command like CPU, DMA, DSP and slave means the memory that responds the data command like SRAM, SDRAM and register. Furthermore, as multiple masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, bus system performance can be changed definitely. Fixed priority and round-robin are used in general arbitration method and TDMA and Lottery bus methods are proposed currently as the improved arbitration schemes. In this study, we proposed the score arbitration method and synthesized it using Hynix 0.18um technology, after design of RTL. Also we analyze the performance compared with general arbitration methods through simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.156-160
• /
• 2011

This paper describes the design and implementation of a System-on-a-Chip (SoC) for pattern recognition to use in embedded applications. The target Soc consists of LEON2 core, AMBA/APB bus-systems and custom-designed accelerators for Gaussian Pyramid construction, lighting compensation and histogram equalization. A new FPGA-based prototyping platform is implemented and used for design and verification of the target SoC. To ensure that the implemented SoC satisfies the required performances, a pattern recognition application is performed.