• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.192-194
• /
• 2004

At present, application of PSS/E input data for power flow , stability and fault analysis consist of only 154kV and over data(except 22.9kV data). 22.9kV(5.C) Static Condenser is in operation and installation at 22.9kV Bus of 154kV Substation. however, we assume that 22.9kV 5.C install at 154kV Bus. so, we need to study and search about critical limit for 154kV Bus standard operating Voltage according to 22.9kV 5.C Modeling Site by PSS/E Ver28

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.11C
• /
• pp.1102-1110
• /
• 2007

In this paper, we design the FPGA (Field-Programmable Gate Array) of the CAMB (Constant-Amplitude Multi-code Biorthogonal) modulation, and implement the SoC (System on Chip). The ASIC (Application Specific Integrated Circuit) chip is be implemented through targeting and board test. This 12Mbps modem SoC includes the ARM (Advanced RISC Machine)7TDMI, 64Kbyte SRAM(Static Random Access Memory) and ADC (Analog to Digital Converter)/DAC (Digital to Analog Converter) for flexible applications. Additionally, the modem SoC can support the variable communication interfaces such as the 16-bits PCMCIA (Personal Computer Memory Card International Association), USB (Universal Serial Bus) 1.1, and 16C550 Compatible UART (Universal Asynchronous Receiver/Transmitter).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.68-75
• /
• 2016

As the number of cores and IPs increase in multiprocessor system-on-chip (MPSoC), network-on-chip (NoC) has emerged as a promising novel interconnection architecture for its parallelism and scalability. However, minimization of the latency in NoC with legacy bus IPs must be addressed. In this paper, we focus on the latency minimization problem in NoC which accommodates legacy bus protocol based IPs considering the trade-offs between hop counts and path collisions. To resolve this problem, we propose separated address/data network for independent address and data phases of bus protocol. Compared to Mesh and irregular topologies generated by TopGen, experimental results show that average latency and execution time are reduced by 19.46% and 10.55%, respectively.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.116-122
• /
• 2024

AMBA AHB-Lite bus is widely used in on-chip bus protocol for low-power and cost-effective SoC. However, it lacks built-in error detection and correction for end-to-end data integrity. This can lead to data corruption and system instability, particularly in harsh environments like automotive applications. To mitigate this problem, this paper proposes the application of SEC-DED (Single Error Correction-Double Error Detection) to AMBA AHB-Lite bus. It aims not only to detect errors in real-time but also to correct them, thereby enhancing end-to-end data integrity. Simulation results demonstrate real-time error detection and correction when errors occur, which bolsters end-to-end data integrity of automotive on-chip bus.

• ETRI Journal
• /
• v.43 no.3
• /
• pp.471-482
• /
• 2021

Several code-division multiple access (CDMA)-based interconnect schemes have been recently proposed as alternatives to the conventional time-division multiplexing bus in multicore systems-on-chip. CDMA systems with a dynamic assignment of spreading codewords are particularly attractive because of their potential for higher bandwidth efficiency compared with the systems in which the codewords are statically assigned to processing elements. In this paper, we propose a novel distributed arbitration scheme for dynamic CDMA-bus-based systems, which solves the complexity and scalability issues associated with commonly used centralized arbitration schemes. The proposed arbitration unit is decomposed into multiple simple arbitration elements, which are connected in a ring. The arbitration ring implements a token-passing algorithm, which both resolves destination conflicts and assigns the codewords to processing elements. Simulation results show that the throughput reduction in an optimally configured dynamic CDMA bus due to arbitration-related overheads does not exceed 5%.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.951-957
• /
• 1999

The saddle node bifurcation (SNB) and the distance voltage instability are valuable information in power system planning and operation. This paper presents a new efficient, robust and unified strategy to compute the SNB by the combined use of the continuation power flow (CPF), Point of Collapse (PoC) method, and the method of a pair of multiple load flow solutions (PMLFS) with Lagrange interpolation utilizing only their advantages: the approximate nose curves and critical loading are determined fast by Lagrange-interpolating two stable and two unstable solutions obtained by using the robust CPF and PMLFS; the exact SNB is computed by the quadratically converging PoC method. The proposed method has been tested on Klos-Kerner 11-bus, New England 30-bus, IEEE 118-bus and KEPCO 791-bus systems. The method is found to be so efficient that computation time for determining the SNB of the KEPCO 791-bus system is 17.82 sec by a notebook PC with 300 MHz Pentium processor.

• Proceedings of the KAIS Fall Conference
• /
• 2009.05a
• /
• pp.255-258
• /
• 2009

최근 EDA 툴의 기술적인 향상과 반도체 공정의 발달로 IC 설계자들은 RISC 프로세서, DSP 프로세서, 메모리 등 많은 IP가 하나로 집적되는 SoC구조가 가능해졌다. 하지만 기존에 사용되는 대부분의 SoC는 공유버스 구조를 가지고 있어, 병목현상이 발생하는 문제점을 가진다. 이러한 문제점은 SoC 내부의 IP들이 많을수록 SoC 플랫폼의 전체 성능이 저하되어, CPU 자체의 속도보다는 효율적인 통신에 의해 성능이 좌우된다. 본 논문에서는 공유버스의 단점인 병목현상을 줄이고 성능을 향상시키기 위하여 크로스바 스위치버스 구조를 제안한다. OpenRISC 프로세서, VGA/LCD 제어기, AC97 제어기, 디버그 인터페이스, 메모리 인터페이스로 구성되는 SoC 플랫폼의 WISHBONE 온칩 공유버스 구조와 크로스바 스위치 버스 구조의 성능을 비교한 결과, 기존의 공유버스보다 26.58%의 성능이 향상됨을 확인하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.649-651
• /
• 2012

본 논문에서는 Core-A를 이용한 실시간 영상 신호 처리 SoC 설계와 검증에 대해 기술한다. 영상 신호 처리를 위한 방식으로 SoC를 사용하였으며 영상 처리를 위한 ISP를 설계하였다. 영상 처리를 위한 마이크로프로세서는 코드밀도를 높이고 Verilog HDL을 사용하여 기술되어 여러 응용분야에서 최적화할 수 있는 국내에서 개발된 Core-A를 사용하였다. 본 논문에서 제안한 SoC는 Verilog HDL언어로 설계 되었고, 기본 SoC의 구조는 Core-A, AMBA Bus, ISP, Memory controller, Uart로 구성하였다. 구현된 SoC는 다양한 영상 신호 처리를 지원하여 향후 영상압축 인코더의 실시간 이미지 처리용 소스로 사용할 수 있고 신호 처리 알고리즘 검증용에도 유용하게 사용될 수 있을 것으로 보인다. 설계 검증을 위해 먼저 FPGA를 이용하여 검증하였으며 TSMC $0.18{\mu}m$ CMOS공정으로 합성한 결과 동작주파수는 50MHz, 전체 게이트 수 86.1k로 확인되었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4A
• /
• pp.390-398
• /
• 2004

This paper describes a study on the automatic generation system of the interface for communication among AMBA bus and IPs with different protocols. Employing an extended STG, the proposed system generates the interface modules required for the communication among IPs with different protocols. For an example system, the interface module for communication between AMBA AHB bus and a video decoder has been generated and verified in its functionality. The area and latency have been compared with the manually designed interface. For burst-mode communication, the generated interface module shows the comparable performance with the manually designed module. For single-mode communication, the generated interface module shows a slightly worse performance than the manually designed module. However, the increased area is negligible considering the size of the IP.

• Journal of IKEEE
• /
• v.20 no.3
• /
• pp.333-336
• /
• 2016

LIN (local interconnect network) is a standard low-speed serial communication protocol, and it was developed as an efficient sub-bus for automotive electronic modules. In this paper, a LIN controller was implemented in Verilog HDL, based on LIN ver. 2.2A. The implemented LIN controller was verified in FPGA, and it can be supplied as an IP to be integrated into SoC system. Its size is about 2,300 gates when synthesized in 0.18um technology.