• 제목/요약/키워드: Snag

검색결과 144건 처리시간 0.039초

캐시를 고려한 T-트리 인덱스 구조 (Cache Sensitive T-tree Index Structure)

  • 이익훈;김현철;허재녕;이상구;심준호;장준호
    • 한국정보과학회논문지:데이타베이스
    • /
    • 제32권1호
    • /
    • pp.12-23
    • /
    • 2005
  • 지난 10년간 CPU의 속도는 메모리의 속도에 비해 급속한 속도로 발전하였다 그 결과 데이터 베이스 시스템을 포함한 다른 컴퓨터 응용분야에서 메모리의 접근이 병목현상을 일으키게 되었다. 메모리의 접근 속도를 줄이기 위해 캐시 메모리가 도입되었다 하지만 캐시 메모리는 원하는 데이타가 캐시에 옮겨져 있어야 메모리 접근 속도를 줄일 수 있다. 때문에 응용프로그램에서 데이타를 어떤 순서로 액세스 하느냐에 따라 캐시의 활용도가 달라지고 응용프로그램의 성능이 달라지게 된다. 이 시점에서 현재 컴퓨터에서 B+-트리가 T-트리보다 더 빠르다는 사실이 알려졌다. B+-트리가 T-트리보다 캐시를 더 효율적으로 사용하기 때문이다. 또한 B+-트리를 개선하여 캐시를 더욱 효율적으로 사용하는 CSB+-트리(Cache Sensitive B+-tree)가 제안되기도 하였다 본 논문의 목표는 T-트리가 캐시를 효율적으로 사용하도록 새로운 T-트리 구조를 개발하는 것이다. CSB+-트리와 같이 시스템의 L2 캐시를 최대한 활용하며 기존 T-트리가 가지는 장점을 가지는 새로운 CST-트리(Cache Sensitive T-트리)를 설계 개발하고, 실험을 통해 기타 다른 인덱스 구조에 비교하여 CST-트리의 우수성을 보인다.

기후변화를 고려한 낙엽송 지위지수 추정 (Analysis of the Effect of Climate Change on the Site Index of Larix leptolepis)

  • 김동현;김의경;박상병;김현근;김형호
    • 한국산림과학회지
    • /
    • 제101권1호
    • /
    • pp.53-61
    • /
    • 2012
  • 이 연구는 기후변화를 고려한 낙엽송의 생장모형을 추정한 후 이에 따른 영향을 분석하는 데 있다. 이를 위해 종속변수는 지위지수, 독립변수는 입지, 기상, 토양인자를 설정하였으며, WLS 모형을 이용하여 잣나무의 생장모형을 추정하였다. 이를 토대로 한반도에 적용된 IPCC의 A1B 기후변화 시나리오 따라 $-3.3^{\circ}C$에서 $+3.3^{\circ}C$까지 시뮬레이션한 결과, $-0.8^{\circ}C$를 정점으로 지위지수는 감소하는 것으로 분석되었다. 이러한 결과를 바탕으로 각 시나리오에 따른 지역별 낙엽송 지위지수의 변화를 분석한 결과, 각 시나리오별 낙엽송의 지위지수는 전반적으로 감소하였으나 일부지역에서는 낙엽송의 지위지수가 증가하는 것으로 나타났다. 하지만 기온이 $3^{\circ}C$ 상승했을 때, 지위지수가 증가한 지역 또한 상대적으로 감소하는 것으로 분석되었다.

PNN 치환에 따른 저온소결 PMS-PMN-PZT계 세라믹스의 압전 및 유전특성 (Piezoelectric and Dielectric Characteristics of Low Temperature Sintering PMS-PNN-PZT Ceramics According to the Amount of PNN Substitution)

  • 이상호;김국진;류주현;홍재일
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
    • /
    • pp.253-253
    • /
    • 2007
  • 압전 액츄에이터 및 초음파진동자의 응용범위가 넒어짐에 따라 변위량, 응력 등을 개선시키기 위해 전기기계결합계수 kp 및 압전 d상수가 종전보다 큰 재료가 요구되고 있으며, 초음파진동자나 압전 모터와 같이 마찰에 의한 열손실이 많이 발생하는 액츄에이터에 적용할 큰 기계적품질계수롤 가지는 저손실 압전 액츄에이터 및 초음파진동자용 재료가 필요한 실정이다. PZT계 세라믹스는 높은 유전상수와 압전특성으로 전자세라믹스분야에서 가장 널리 사용되어지고 있지만, $1200^{\circ}C$이상의 높은 소결온도 때문에 $1000^{\circ}C$ 부근에서 급격히 휘발되는 PbO로 인한 환경오염과 기본조성의 변화로 인한 압전특성의 저하가 문제시 되고 있다. $Pb(Ni_{1/3}Nb_{2/3})O_3$는 약 $-120^{\circ}C$정도의 큐리온도룰 가지는 강유전체로 Pb(Zr, Ti)$O_3$계 세라믹스에 치환 시 유전상수와 전기기계결합계수를 개선시키는 대표적인 성분이다. 따라서 본 연구에서는 저온소결 저손실의 적층형 압전 액츄에이터를 개발하기 위해 PMS-PMN-PZT계 세라믹스에 $Pb(Ni_{1/3}Nb_{2/3})O_3$ 세라믹스를 치환하고 $Li_2CO_3$$Na_2CO_3$ ZnO를 소결조재로 사용하여 저온소결 하였으며 PNN 치환량에 따른 결과를 관찰 하였다.

  • PDF

비만 여대생의 운동방법에 따른 신체조성 및 비만스트레스의 변화 (Changes of Body Composition according to Exercise Type in Obesity Female Students)

  • 신철화;김찬규;장일용;이은상;정대인
    • 한국콘텐츠학회논문지
    • /
    • 제15권10호
    • /
    • pp.346-353
    • /
    • 2015
  • 본 연구는 유산소 운동과 복합운동 후 신체조성과 스트레스의 변화를 확인하고 비만관리 운동프로그램 개발 시 근거자료로 활용하고자 시행하였다. 비만 여대생 40명을 유산소운동군(20명), 복합운동군(20명)으로 분류하였다. 매회 60분, 1주에 3회, 총 8주간 각각 운동프로그램을 시행한 후 신체조성 및 스트레스를 비교하였다. 연구결과, 유산소 운동군과 복합운동군 모두 체지방율이 유의하게 감소되었고, 비만스트레스는 복합운동군에서 유의한 감소가 있음을 알 수 있었다. 따라서 비만관리 운동프로그램을 개발 시 비만스트레스를 고려한 복합운동군이 더 적합할 것으로 생각된다.

인솔 높이에 따른 복합운동프로그램 적용 시 20대 비만 여대생의 신체생리 및 체력적 기능 변화 (Changes of Biophysical and Physical Fitness Function on Combined Exercise Program in 20' Female University Students with Obesity according to Heights of Insole)

  • 신철화;김찬규;장일용;이은상;정대인
    • 한국콘텐츠학회논문지
    • /
    • 제15권10호
    • /
    • pp.336-345
    • /
    • 2015
  • 본 연구는 20대 비만 여대생의 복합운동 시 운동화 속 인솔의 높이의 차에 따른 비만관련 신체생리 및 체력적 기능 변화를 알아보기 위해 실시하였다. 비만 여대생 36명을 인솔의 높이에 따라 0cm군, 5cm군, 9cm군으로 군당 12명씩 분류하여 비만 관련 신체 생리는 기초대사량과 체지방률을 측정하였고, 건강 관련 체력은 넙다리네갈래근 등속성 근력, 근지구력, 유연성, 순발력을 측정하여 운동 전과 후 각 그룹 간을 효과적 차이를 비교 분석하였다. 그 결과 넙다리네갈래근의 등속성 근력과 기초대사량은 세 군 모두 증가하였으며, 5cm군이 0cm군과 9cm군에 비해 더 유의하게 증가된 것으로 나타났다. 결론적으로 적절한 인솔의 높이를 적용한 복합운동은 비만 여대생의 근력과 기초대사량에 긍정적인 영향을 미친다.

지하 습윤 환경에서 콘크리트 구조물 균열 누수에 사용되는 주입형 보수재료의 부착 성능과 거동 대응 성능 평가의 상관성 분석 연구 (Comparative Analysis of Substrate Wet Surface Adhesion and Substrate Movement Response Performance Testing Methods for Injection Type Repair Materials Used in Leakage Cracks of Concrete Structure in Underground Environment)

  • 김수연;오규환;오상근
    • 대한건축학회논문집:구조계
    • /
    • 제34권9호
    • /
    • pp.19-26
    • /
    • 2018
  • The focus of this study was centered around 15 common injection type water leakage repair materials (3 different types for each; synthetic polymer, cementitious, acrylic, epoxy, urethane) used in concrete structures of Korea and analyzing their wet surface adhesion performance in accordance to the ISO TS 16774 Test Method for Repair Materials for Water-leakage Cracks in Underground Concrete Structures, Part 4: Test Method for Adhesion on Wet Concrete Surface, and the results of this study was taken to be place under a comparative analysis with the results of the preceeding study on response to substrate movement performance study. The results of this comparative study showed that other than 1 specimen of 1 type of the acrylic and 3 specimens of 1 type of the synthetic polymer type materials, all of the 93% of the specimens used in this study showed stable adhesion on wet substrate surface, and we were able to determine that materials that have proper response properties against substrate movement are highly flexible and have high adhesion properties, but their adhesion properties on wet substrate would change based on their viscosity.

펄스전류 활성 소결에 의해 제조된 나노크기의 TiAl계 금속간화합물의 미세구조와 기계적 특성에 미치는 고에너지 기계적 밀링시간의 영향 (Effect of High-Energy Mechanical Milling Time on Microstructure and Mechanical Properties of the Nano-sized TiAl Intermetallic Compounds Fabricated by Pulse Current Activated Sintering)

  • 김지영;우기도;강덕수;김상혁;박상훈
    • 대한금속재료학회지
    • /
    • 제49권2호
    • /
    • pp.161-166
    • /
    • 2011
  • The aim of this study was to determine the effect of high-energy mechanical milling (HEMM) time and sintering temperature on microstructure and mechanical properties of the TiAl composite fabricated by pulse current activated sintering. TiAl intermetallic powders were milled by HEMM for 1h, 4h, and 8h respectively. Thermal analysis was used to observe the phase transformation of the milled TiAl powders. The sintering time decreased with increase of milling time. The hardness and fracture toughness of the sintered specimens also was improved with increasing milling time. The grain size of the sintered specimens which was milled for 4h was in the range of 50~100 nm.

심층학습을 이용한 한국종합주가지수의 특성분석 (Characteristic Analysis of Kospi Index Using Deep Learning)

  • 한상일
    • 실천공학교육논문지
    • /
    • 제16권1_spc호
    • /
    • pp.51-58
    • /
    • 2024
  • 본고는 Kospi와 S&P500 지수를 이용해 한미 주식시장 간 차이를 보고 이를 통해 정책적 시사점을 논하고자 한다. 이를 위해 기존 시계열 분석 방법에 더해 심층학습 방법으로 시장간 비교를 하되 주가 예측력, 자료 생성 능력 측면에서 비교를 했다. 월별자료에서 시계열간 차이는 크지 않고 일별 자료에서 안정성 측면에서 차이가 약하며, 예측력이나 모의자료 생성에서도 차이가 크지 않았다. 본 연구결과와 같이 시장가격 움직임의 패턴이 한미간에 차이가 크지 않다면, 공매도의 부작용에 대한 대책으로 담보비율, 보고주기와 같은 직접적 규제보다 미국과 유사하게 투자자들의 자산운용 전략에 영향을 미치는 장기 주식보유에 대한 세제혜택과 같은 제도개편이 효과적이라 본다.

Effect of Pine Wilt Disease Control on the Distribution of Ground Beetles (Coleoptera: Carabidae)

  • Heo, Young-Jin;Ha, Man-Leung;Park, Jun-Young;Lee, Snag-Gon;Lee, Chong-Kyu
    • Journal of Forest and Environmental Science
    • /
    • 제35권4호
    • /
    • pp.248-257
    • /
    • 2019
  • We chose the Mt. Dalum area (located in Gijang-gun, Busan, Korea) for our survey, particularly The pine wilt disease zone and the non-permanent control area. This study investigates the effect of pine wilt disease on the distribution of beetle species in the process of ecosystem change due to insect control; pine forests treated for pine wilt disease were divided into insect control and non-control sites, respectively. The results of this study are as follows. Twen tyseven species belongs to 12 families were identified from 969 ground beetles collected from this sites. Species richness was the highest in Coleoptera (6 species, 469 individuals). In the control site, 21 species belongs to 10 families were identified from 228 individuals, while 24 species of 11 families from 533 individuals in the non-control area. The highest number of species were noted in June and July from the non- control and control sites, respectively. The highest number of insects in control and non-control sites was observed in July, while the lowest in September. Sipalinus gigas gigas, Spondylis buprestoides, Plesiophthalmus davidis, Calosoma maximowiczi, Damaster jankowskii jankowskii, and Damaster smaragdinus were captured in both study sites. Episomustur ntus and Glischrochilus ipsoides were only captured in the control site, while Macrodorcas rectus rectus and Pheropsophus javanus were only captured in the non-control site. Six beetles and five species (such as Calosoma maximowiczi) were found in the control site and six species (including Damaster smaragdinus) in the non-control site. The species distributions by altitude were 163, 518, and 258 individuals, at 100, 200 and 300 m sites, respectively. The diversity, evenness, and dominance indices in the control area were 0.764, 0.812, and 0.367, respectively. The diversity, evenness, and dominance indices in the non-control area were 0.927, 0.837, and 0.352, respectively. The similarity index between the control and non-control area was 80%.

Sphaerotheca phaseoli에 의한 녹두 흰가루병 발생 (Occurrence of Powdery Mildew on Mung bean(Vigna radiatus L.) Caused by Sphaerotheca phaseoli)

  • 이상엽;황순진;이상범
    • 식물병연구
    • /
    • 제8권3호
    • /
    • pp.166-170
    • /
    • 2002
  • 2000년 가을에 경기도 수원의 녹두재배포장에서 흰가루병이 발생하여 병원균의 형태 등을 조사하였다. 병징은잎의 앞면, 뒷면과 잎자루에서 흰가루의 균총이 형성되어서 진전됨에 따라서 잎이 황화되어 말라서 결국 낙엽이 되었다. 이 병원균의 분생포자는 분생자경의 끝에 연쇄적으로 생기며, 무색, 단세포, 타원형내지 장타원형으로 피브로신체를 가지고 있으며, 그 크기는 25~38$\times$16~22 $\mu\textrm{m}$ 이었다. 분생포자의 발아관은 단순발아관이며, 부착기는 뚜렷하지 않았고, 분생자경은 거의 수직으로 분지하였고, 기부는 대부분 직선상이었으며, 그 길이는 67~100 $\mu\textrm{m}$ 이었다. 기부세포는 길이가 37~65 $\mu\textrm{m}$, 폭이 10~11 $\mu\textrm{m}$ 이었다. 그리고 부착기는 뚜렷하지 않았으며, 발아관은 단순형이며 분지하지 않았다. 폐쇄자낭각은 구형이나 편구형으로 크기가 85~1130 $\mu\textrm{m}$이며, 부속사는 6-11개이며, 격막이 1~7개, 크기가 192~223$\times$5~7 $\mu\textrm{m}$ 이었다 벽세포는 불규칙다각형으로 15~45$\times$7~26 $\mu\textrm{m}$의 크기이며, 폐쇄자낭각은 하나의 자낭을 가지고 있으며, 자낭은 계란형 또는 반구형으로 8개의 자낭포자를 가지고 있으며, 크기는 62~95$\times$50~67 $\mu\textrm{m}$이었다. 자낭포자는 난원형 또는 반구형으로 크기가 16~24$\times$12~16 $\mu\textrm{m}$ 이었다. 이상의 결과로 Sphae개theca phaseoli 의한 녹두흰가루병으로 동정되어 국내에서 처음으로 보고한다.