• Journal of the Korean Wood Science and Technology
• /
• v.10 no.2
• /
• pp.22-27
• /
• 1982

This experiment was carried out to evaluate the results of fire retardancy of sealer coated plywood by Building material combustibility tester and Inclined panel tester. At this study, weight loss percentage, flame exhausted time, burning point and smoke yield coefficient were examined. The findings of this study lead to conclusions as listed below. 1. It was obvious that weight loss percentage and flame exhausted time of Inclined panel tester had more remarkable tendency than those of Building material combustibility tester. 2. Burning point was determined by Inclined panel tester while smoke yield coefficient by Building material combustibility tester. 3. Weight loss percentage decreased remarkably with proportion to the increase of sealer coated amount during 5 minutes burning. 4. Flame exhausted time decreased with proportion to the increase of sealer coated amount during 3 minutes burning. 5. Burning point indicated increasing tendency with proportion to the increase of sealer coated amount. 6. Smoke yield coefficient of urea scaler showed definite inclination decreasing with the increase of sealer coated amount.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.2
• /
• pp.85-93
• /
• 2006

This study was conducted to evaluate the optimal processing conditions of smoke-dried powdered oysters and to determine their shelf-life during storage for development of a natural oyster flavoring substance. The optimal conditions for processing of smoke-dried oyster powder with freshy oyster were as follows. Raw shelled oysters were rinsed with 3% saline solution, drained, boiled for 10 minutes at $98^{\circ}C$, and then smoked for 1 hour at $50^{\circ}C$, followed by drying for 4 hours at $80^{\circ}C$ Smoke-dried oyster powder with oyster scraps were prepared as flavoring material. The smoked oyster scraps were submerged in oyster sauce far 10 minutes at room temperature and then dried with hot air for 5 hours at $50^{\circ}C$. The smoke-dried oysters and smoke-dried oyster scraps were then pulverized to 50 mesh and packed in tea bags or vacuum-packed in laminated plastic film bags (PE/PVDC/CPP, $12{\mu}m/15{\mu}m/50{\mu}m$). Compared to non smoke-dried powdered oysters, the smoking and dipping in oyster sauce enhanced the flavor and prevented lipid oxidation of the smoke-dried powdered oyster product. Shelf-life tests indicated that the vacuum-packaging method preserved the quality of smoke-dried powdered oysters stored for 150 days at room temperature.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.373-380
• /
• 2022

In this study, Chung's equations 1, 2, and 3 were extended to standardize smoke safety rating evaluation in case of fire, and Chung's equations-V, smoke performance index-V, and smoke growth index-V were calculated. Five types of wood were selected and their smoke indices were measured using the cone calorimeter method according to ISO 5660-1. The smoke risk was graded by the smoke risk index-VI according to Chung's equation-VI. Smoke risk index-VI increased in the order of PMMA (1) ≈ maple (1.01) < ash (1.57) < needle fir (4.98) < paulownia (46.15) < western red cedar (106.26). It was predicted that maple and ash had the lowest smoke risk, and paulownia and western red cedar had the highest. The five samples' CO mean production rate (COP_mean) was 0.0009~0.0024 g/s, indicating that these woods were incompletely burned than the polymethyl methacrylate (PMMA) reference material. Regarding the smoke properties of the chosen woods, the smoke performance index-V (SPI-V) increased as the bulk density increased, and the smoke risk index-VI (SRI-VI) decreased.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.295-300
• /
• 2003

Experimental comparison was done for measuring Heat Release Rate and Smoke Production Rate of electric motor car's interior panels using cone calorimeter. Radiative heat flux of $50kW/m^2$ was used to simulate the condition of fully developed fire case in the tests. It was observed that Heat Release Rate and Smoke Production Rate curves were shown differently according to interior materials. From experiment's results we can deduce that materials having higher rate of heat release smolder more smoke. It needs to establish fire risk propensity of each material and to set up the standards urgently.

• Journal of the Korean Society of Safety
• /
• v.13 no.2
• /
• pp.88-95
• /
• 1998

Five parts of the automotive interior materials were sampled to determine their combustion characteristics. Oxygen Indexer, Smoke chamber, Differential Scanning Calorimeter(DSC) were used as the analysis apparatus. All LOI values of samples appear less than 21. The combustion phenomena of the interior materials primarily depends on properties of each layer material. The amount of generated smoke are reached the maximum value within 30 - 90sec after ignition. The experimental results of combustion characteristics and DSC of H/Line also indicated that the layer of foam was melt first and it caused the propagation of flame through the sample. The combustion characteristics of multi-layer materials primarily depends on thermal characteristics of single layer material.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1997.11a
• /
• pp.211-218
• /
• 1997

Five parts of vehicle upholsteries were sampled to determine its combustion characteristics. Oxygen Indexer, Smoke chamber, Differential Scanning Calorimetry(DSC) are applied as the analysis apparatus. All LOI values of samples appear less than 21. The combustion phenomena of vehicle upholster primarily depends on properties of each layer material. The amount of smoke generated is the experiment reached the maximum value within 30-90sec after ignition. The experimental results of combustion characteristics and DSC of H/Line also indicated that the layer of foam was melt first and it caused the propagation of flame through the sample. The combustion characteristics of multi layer materials primarily depend on thermal characteristic of single layer material.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.88-97
• /
• 2011

We carried out cationization of Dak pulp (paper mulberry bast fiber pulp) which is raw material of Hanji (Traditional Korean Paper) using a (3-chloro-2-hydroxypropyl) trimethyl ammonium chloride to improve dyeability during a dyeing of Hanji with Gardenia (Gardenia jasminoides) and smoke tree (Cotinus coggygria). Fiber specific charge densities were determined using polyelectrolyte titration method and K/S values of dyed Hanji was calculated by Kubelka-Munk equation. As the result, fiber specific charge density increased with degree of cationization. Colors of Hanji dyed with Gardenia did not vary significantly with degree of cationization, but cationized Hanji dyed with smoke tree showed a large increase of a* value and reddish yellow color. After-mordanting did not decrease K/S value of dyes with cationized Hanji. K/S values of dyed Hanji decreased with increasing dyeing temperature. For smoke tree, the cationization impair lightfastness of dyed Hanji without mordant. After-mordanting with copper acetate or iron chloride improved lightfastness of dyed Hanji.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.7
• /
• pp.39-44
• /
• 2005

A great part of flint fuel is Hydrogen and carbon's combination, they should be generated steam and carbon gas when combine with oxygen for perfect combustion in the inside of engine but, the pollutive material are discharged, even though perfect combustion condition especially $NO_x$ and Smoke. they are really harmful for health. In this paper was shown the result of discharging gas' reduction quality. which used combination of corona discharge using the high voltage source of common frequency with EGR. $NO_x$ is increased in entire load erea in proportion to increasing of EGR rate and impression voltage. Smoke is increased slowly under 75[%] in load rate but it is increased rapidly in entire load erea and the reduction rate of Smoke is increased in proportion to increasing of impression voltage.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.37-43
• /
• 2017

The combustion characteristics of four kinds of wood specimens, such as Japan cedar, spruce, lauan, and red pine, were tested using the standards of Cone calorimeter (ISO 5660-1, 2) and smoke density tester (ASTM E 662). Japan cedar caught fire the quickest but the mean heat release rate was the lowest, $58.52kW/m^2$. The mean heat release rate of red pine appeared to be the highest, $71.75kW/m^2$. The lauan and Japan cedar generated relatively large amounts of carbon monoxide while the red pine and the spruce generated relatively large amounts of carbon dioxide. The red pine generated large amounts of smoke and the spruce generated the least amounts of smoke than the other samples. The total smoke release rate in the dynamic method was the highest in red pine and the lowest in spruce. The smoke density of red pine in the static method was highest in the non-flaming and flaming methods. In the non-flaming method, the smoke density of lauan was the second highest, whereas the flaming method was the least. In terms of the heat release rate, the fire risk from red pine was highest among the four test specimens. From the viewpoint of smoke generation, red pine was the most dangerous material in both dynamic and static methods.

• Transactions on Electrical and Electronic Materials
• /
• v.3 no.3
• /
• pp.34-38
• /
• 2002

In this paper, efficiency estimation of toxicity fee fire resistance cable experiments was measured smoke density of toxicity free fire resistance polyolefin insulation material and electric field dependence of tree shape in low density polyethylene (LDPE). One of the most serious causes of failure in high-voltage cables, can be an electrical discharge across an internal gab or void in the insulating material. Treeing due to partial discharge is one of the main causes of breakdown in the insulating materials and reduction of the insulation life. Therefore the necessity for establishing a method to diagnose the aging of insulation materials and to predict the breakdown of insulation and research of the fire resistance character has become important. First, we have studied on electric field dependence of tree shape in LDPE about treeing phenomena occurring on the high electrical field. Second, the measurement method is the attenuation quantity of irradiation by smoke accumulating with in a closed chamber due to non-flaming heat decomposition and flaming combustion. A main cause of fire-growth and generating toxic gas when, it bums, should be dealt with great care in life. safety design. The fire gases were occurred carbon monoxide and decomposition than in polyolefin due to incomplete combustion of PVC, which has high content of carbon in chemical compound.