• 제목/요약/키워드: Smith method

검색결과 211건 처리시간 0.024초

MDA에서 판별변수 선택을 위한 베이즈 기준 (A Bayes Criterion for Selecting Variables in MDA)

  • 김혜중;유희경
    • 응용통계연구
    • /
    • 제11권2호
    • /
    • pp.435-449
    • /
    • 1998
  • 본 연구는 다중판별분석(MDA)에서 필요한 변수선택기준을 베이즈접근법으로 제안하였다. 이 베이즈판별변수 선택기준은 여러 정규모집단분포의 평균벡터에 대한 동질성 검정에 필요한 디폴터형태의 베이즈요인을 객관적 베이즈방법으로 유도하여 설정하였다. 디폴트베이즈요인(default Bayes factor)은 Spiegelhalter와 Smith (1982)가 계발한 가상적트레이닝표본법(imaginary training sample method)을 사용하여서 도출하였다. 또한 제안된 베이즈판별변수선택 기준이 지닌 분포의 성질을 이용하여, 추가 판별변수(또는 변수군)가 MDA에 기여하는 부가적인 판별력에 대한 검정법 및 추가판별변수(또는 변수군)의 선택 기준에 대해서도 논하였다. 본 연구에서 새로이 얻은 변수선택기준은 최적부분집합선택법(optimal subset selection method)뿐 아니라 각 단계적방법(stepwise method)의 변수선택기준으로 사용될 수 있으며, 두 그룹 판별분석에도 사용이 가능하다는 점에서 표본이론에 의해 여러 형태로 개발된 기존의 판별변수 선택 기준들을 하나로 통합시킬 수 있는 기능을 지니고 있다. 모의실험을 실시하여 최적 부분집합선택법과 단계적방법하에서 제안된 판별변수선택 기준이 가진 효용성을 평가하였다.

  • PDF

디젤 기관(機關)의 계통식별(系統識別) -시뮬레이션 연구- (System Identification of a Diesel Engine -Simulation Study-)

  • 조한근;리차드 스미스;스티브 말리
    • Journal of Biosystems Engineering
    • /
    • 제15권4호
    • /
    • pp.281-289
    • /
    • 1990
  • A frequency-domain, system-identification method using a binary multifrequency signal was developed to find the transfer function between smoke intensity and throttle position in a diesel engine. This paper describes the simulation study performed to test the identification method developed. With an assumption of a diesel operation in a limited region about the normal operating state, the linear theory was adopted. Because that air fuel ratio is one of the most important operating variables causing smoke production in diesel combustion, single-input and single-output model was adopted.

  • PDF

A Bayes Criterion for Testing Homogeneity of Two Multivariate Normal Covariances

  • Kim, Hea-Jung
    • Journal of the Korean Statistical Society
    • /
    • 제27권1호
    • /
    • pp.11-23
    • /
    • 1998
  • A Bayes criterion for testing the equality of covariance matrices of two multivariate normal distributions is proposed and studied. Development of the criterion invloves calculation of Bayes factor using the imaginary sample method introduced by Spiegelhalter and Smith (1982). The criterion is designed to develop a Bayesian test criterion, so that it provides an alternative test criterion to those based upon asymptotic sampling theory (such as Box's M test criterion). For the constructed criterion, numerical studies demonstrate routine application and give comparisons with the traditional test criteria.

  • PDF

반복적 Cumulant 모멘트 방법에 의한 Boltzmann 방정식의 해법과 충격파구조에 관한 연구 (Iterative Cumulant Moment Method for solution of Boltzmann Equation and its Application to Shock Wave Structure)

  • 오영기
    • 대한화학회지
    • /
    • 제42권4호
    • /
    • pp.398-410
    • /
    • 1998
  • Boltzmann 방정식의 비선형 해법으로서 cumulant 모멘트 방법을 연구하였으며, Maxwell 분자모형 단원자분자 기체계의 정상충격파 문제에 대하여 적용하였다. 모멘트 방정식의 해는 Maxwell-Ikenberry-Truesdell(MIT) 반복법을 사용하였다. 원래의 MIT 반복법은 초기값을 평형분포함수로부터 구하지만, 본 연구에서는 반복계산의 초기값을 Mott-Smith의 두방식(bimodal)함수로부터 구하였다. 모멘트 계산은 2차 반복단계까지 수행하였으며, 강한 충격파에 대한 밀도, 온도, stress, heat flux 등의 윤곽과 충격파의 두께, 그리고 마하수 1.4 미만의 약한 충격파의 두께를 계산하였다. 1차 반복계산에서 충격파 윤곽에 대한 간단한 형태의 해석적 표현을 얻었으며, 이로부터 도출한 약한 충격파 두께에 대한 극한법칙은 Navier-Stokes 이론과 정확히 일치한다. 2차 반복계산에 의한 결과는 강한 충격파의 윤곽곡선 및 충격파 두께가 Monte Carlo 문헌값과 정량적으로 일치함을 보인다.

  • PDF

정맥류 환자의 수술적 치료 -광투시 전도형 정맥적출요법- (Surgical Treatment of Varicose Vein - TIPP(Transilluminated Powered Phlebectomy) -)

  • 이교준;김해균;정은규;강두영
    • Journal of Chest Surgery
    • /
    • 제35권2호
    • /
    • pp.144-148
    • /
    • 2002
  • 본 연구는 광투시 전동형 정맥적출술의 안정성과 임상적인 유용성을 알아보기 위하여 2001년 2월부터 2001년 7월까지 본원에서 하지정맥류로 진단받고 광투시 전동형 정맥적출술을 시행받은 104명의 환자를 조사 대상으로 하였다. 또한 1992년부터 2000년 12월까지 정맥결찰 및 제거수술을 시행받은 환자 90례를 대조군으로 하여 후향적으로 수술시간 및 재원기간, 부작용등을 비교하였다. 총 104명의 환자중 여자는 72명 남자는 32명이었으며, 팽대된 정맥류는 2~3mm정도의 작은 피부절개창을 낸 후에 TrivexTM Irrigated illuminator(Smith & Nephe $w^{ R}$) system으로 생리 식염수를 주입하여 수성박리(hydrodissection)을 시행한 후 TrivexTM Resector(Smith & Nephe $w^{R}$) system을 이용하여 제거하였다. 제거된 정맥의 파편은 흡입기를 이용하여 흡인한 후 패드를 이용하여 압박하여 출혈을 효과적으로 줄일 수 있었다. 수술부작용은 정맥염, 하지부종, 피부천공 등 3.84%이었으며, 평균 피부절개는 3.24개, 평균수술시간은 65.9%이었다. 환자는 평균 1.86일간 입원하였다. 하지 정맥류의 수술적 치료에 있어서 광투시 전동형 정맥적출술은 수술시간 및 합병증의 발생에 있어서 기 존의 수술적 치료방법과 비교하여 우수하며, 환자의 시간적, 경제적 부담이 적으며 재발의 위험이 적고, 미용적으로 우수한 좋은 치료방법이다.의 위험이 적고, 미용적으로 우수한 좋은 치료방법이다.

이중너트가 적용된 풀림방지너트 시스템의 피로안전성 분석 (Analysis of Fatigue Safety for Anti-Loose Nuts System with Dual Nuts)

  • 최정열;김준형;정지승;가상현
    • 한국안전학회지
    • /
    • 제32권4호
    • /
    • pp.22-27
    • /
    • 2017
  • In this study, the authors aim to evaluate a structural and fatigue safety of a new type anti-loose nut system with dual nuts composed of main nut and outer nut to enhance the long-term workability and durability so as to improve the performance of conventional anti-loose nut system. Also, a three-dimensional finite-element method analysis was performed to consider the actual geometry and material property of anti-loose nut system with dual nuts and the effect of static and dynamic loads and loading directions. The analytical results showed that the overall static and dynamic stress of the components of the anti-loose nut system with dual nuts were found to be less than that of the fatigue limit of Goodman-smith diagram and allowable stress of each materials, therefore the anti-loose nut system with dual nuts was sufficient to ensure a structural and fatigue safety.

DART와 EWC/SPUDT형 SAW 필터의 특성 비교 (Comparison of the Performance of DART and EWC/SPUDT Type SAW Filters)

  • 이승희;노용래
    • 한국음향학회지
    • /
    • 제18권4호
    • /
    • pp.53-59
    • /
    • 1999
  • 본 연구에서는 SPUDT 중에서도 현재 가장 일반적으로 사용되면서 동시에 좋은 성능을 가지는 DART와 EWC/SPUDT형 SAW 필터에 대해서 그 효용성을 Smith 등가회로 해석법을 이용하여 분석하였고, apodization weighting을 하였을 때 각각 어떠한 차이를 보이는지를 정량적으로 평가하였다. 그리고 단순히 apodization weighting된 SAW 필터에 SPUDT를 적용하였을 때 생기는 특성열화를 보상하기 위한 방법으로 이 두 종류의 SPUDT에 대해서 폭이 넓은 전극(wide electrode)에 대한 weighting을 독립적으로 행하였다. 그리고 전극두께 및 전극개수에 따른 SPUDT의 성능변화를 DART 및 EWC/SPUDT형 SAW 필터에 대하여 비교하여 분석하였다. 본 연구의 결과는 특정 형태의 SAW 필터에 SPUDT를 적용하는 문제에 있어서 적절한 SPUDT의 타입을 결정하는데 도움을 주리라 기대된다.

  • PDF

개선된 모델 축소 방법에 의한 범용적 제어기 설계 (Design of Generalized Controller by Improved Model Reduction)

  • 조준호;황형수
    • 전자공학회논문지SC
    • /
    • 제44권5호
    • /
    • pp.1-10
    • /
    • 2007
  • 본 논문은 개선된 모델 축소 알고리즘을 이용하여 범용적 제어기 설계에 대해서 제안했다. 개선된 모델 축소 알고리즘은 모델의 과도상태와 정상상태 응답을 고려하여 주파수 영역에서 구하였다. 범용적 제어기 설계는 위상여유와 등 제동의 특성을 만족하는 PID 제어기와 2차 지연 모델에 대하여 촤적화 PID 제어기 설계에 대해서 제안 하였다. 시뮬레이션을 통하여 다양한 공정에 대하여 본 논문에서 제안한 방법을 적용하여, 모델축소 방법의 정확성 및 제어기 성능의 개선을 보였다.

약비선형 파랑 모형의 수립 및 수치모의 (Development of Weakly Nonlinear Wave Model and Its Numerical Simulation)

  • 이정렬;박찬성
    • 한국해안해양공학회지
    • /
    • 제12권4호
    • /
    • pp.181-189
    • /
    • 2000
  • 약비선형 완경사 방정식이 Galerkin 방법에 의하여 연속방정식으로부터 직접 유도되었으며 평균수면에서의 유속으로 표현된 운동방정식과 함께 사용된다. 두 방정식으로부터 수면변위 하나의 함수로 표현된 수식이 또한 유도되었으며 선형형은 Smith and Sprinks(1975)에 의하여 제안된 식과 일치하였고 천해, 천이영역, 심해 조건에 대하여 각각 Airy(1845), Boussinesq. Stokes의 2차 파랑과 비교되었다. 본 연구에서 유도된 비선형 파랑 방정식은 각 방향에 대하여 tridiagonal matrix를 얻기 위하여 근사적인 인수분해법으로 차분된다. 실험을 통하여 수립된 비선형 파랑 모형의 재현 능력을 검토하였으며 대체로 만족스러운 결과를 얻었다.

  • PDF

산업재해 추간판탈출증 환자의 삶의 질에 관한 연구 (Health Related Quality of Life Among Herniation of Nucleus Pulposus Patients Caused by Occupational Accidents)

  • 신나영;이세훈
    • 한국직업건강간호학회지
    • /
    • 제16권2호
    • /
    • pp.168-176
    • /
    • 2007
  • Purpose: This study was to investigate the factors influencing on the quality of life (QOL) among herniation of nucleus pulposus (HNP) patients caused by occupational accidents. Method: 203 patients of HNP were recruited. 106 patients were occupationally injured workers who benefited from workmen's compensation scheme (PWCS group), and 43 patients were non-occupationally injured workers benefiting from national health insurance (PNHI group). Questions of QOL items were used by Korean version of SBQOL (SmithKlein Beecham's Qality of Life). Result: The quality of life of PWCS group measured by SBQOL was significantly lower than that of PNHI group. In PWCS group, SBQOL was significantly lower in patients with 40s of their age, 5 years or longer of treatment duration, no expectation of return to work, no expectation of recovering subject's health, and with loss of employment than rest of the patients in each category. Expectations of recovering subject's health showed to be affect factors on QOL both the PWCS and PNHI groups. Conclusion: It suggested that betterment of expectation of recovering patient's health and an administrative system for returning to work of the occupationally injured HNP patients during treatment be necessary for improvement of their quality of life.

  • PDF