• The Journal of the Korea Contents Association
• /
• v.13 no.8
• /
• pp.458-465
• /
• 2013

The purpose of this research is possible to reduce cost of management and maintenance to realization of smartphone and using data server network technology instead of GPS. Former wireless bus information system was focused on supply side management structure and national spread thus it needs to establish GPS terminal, Windows CE, Window XP embedded and LCD panels which provide only one way communication of information of public traffic information. Therefore, former system management and maintenance cost are very expansive. This research is not use GPS terminal and other hardware equipment but design and realization using smartphone and data network server. This system also provides low cost of management and maintenance. It is not only service downtown area but also out of town and small and medium-sized cities. This system functionally gets a satisfying result user convenience and satisfaction using function of set-up route map, real-time display, and running statically analysis.

• Journal of Distribution Science
• /
• v.16 no.4
• /
• pp.67-74
• /
• 2018

Purpose - Most of the amendments to the law on the improvement of the distribution structure of mobile communication terminal equipment, the fully self-sufficient system of terminals, and the separated disclosure system on the terminals are aimed at securing transparency of the distribution structure by eliminating or reducing handset subsidies. This study investigates what items are important for the purchase of mobile phones in various and rapidly changing mobile phone markets from the consumer's point of view and tries to make a strategic suggestion for future mobile distribution strategies. Research design, data, and methodology - The procedure of this study takes place in four steps. In step 1, only the SF type respondents selected for this study were extracted through MBTI analysis. In step 2, they were divided into three hierarchies for the AHP analysis and each element was arranged. In step 3, the AHP analysis was converted to a Fuzzy-AHP number using the trigonometric centroid method. This was to eliminate the ambiguity of the response by converting into a fuzzy number even if data consistency was maintained with CI value below 0.1. In step 4, the number of converted 2-layer and 3-layer was combined to derive the priority when the final handset is selected. Results - First, the highest importance among the four items in the second tier was the terminal function item, followed by brand, price, and design item. Second, in the third tier, the highest importance was level of after-sales service, followed by device price, processing speed, ease of use, usefulness, and rate system. Third, the arithmetic average of the determinant of the fuzzy function showed that processing speed, ease of use and usefulness in the function item, level of after-sales service in the brand item, and device price in the price item were the five most important factors among 16 choice factors. Conclusions - First, there will be a change in the consumption patterns of consumers who have compared distributors and dealers to purchase handsets with more subsidies. Second, it is highly likely that people will purchase new handsets only when they need to change their devices because they can not receive subsidies by switching phone brands any more.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.10
• /
• pp.1197-1209
• /
• 2016

As Indoor Positioning System demands due to increased penetration and utilization of smart device, Indoor Positioning System using Wi-Fi or BLE(Bluetooth Low Energy) beacon takes center stage. In this paper, a terminal location of the user is calculated through Microscopic Trilateration using RSSI based on BLE. In the next step, a fingerprinting map appling approximate value of Microscopic Trilateration increases an efficiency of computation amount and energy for Indoor Positioning System. I suggest Indoor Positioning Algorithm based on BLE fingerprinting considering efficiency of energy by conducting precise Trilateration that assure user's terminal position by using AP(Access Point) surrounding targeted fingerprinting cells. And This paper shows experiment and result based on An Suggesting Algorithm in comparison with a fingerprinting based on BLE and Wi-Fi that be used for Indoor Positioning System.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.8
• /
• pp.33-41
• /
• 2013

Intelligent automobile technology and IT convergence, the development of new imaging technology media applications based on open source Android installed on tracked, wheeled smart phone application technology and the development of intelligent vehicles as a new paradigm a lot of research and development being made. Android-based intelligent automotive applications, technology, and evolved into the center of a set of various multimedia technologies move beyond the limits of the means of each of multimedia platforms, services and applications that have been developed in such a distributed environment, has been developed according to a variety of services through technology mobile terminal device technology is an absolute requirement. In this paper, SVC Codec, real-time video and graphics processing and SoC design intelligent vehicles middleware applications with monolithic system specification through Android-based design of intelligent vehicles dedicated middleware research experiments on open platforms, and provides various terminal services functions SoC based on a newly designed and standardized interface analysis techniques in this study were verified through experiments.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.6
• /
• pp.119-132
• /
• 2011

Mobile devices such as smart phones have brought big changes to be called as 'mobile big bang' against which we can't go. Mobile banking service and MTS(Mobile Trading System) are freely available at any time, anywhere and we are able to activate communications between financial company staffs out of the office and take care of business works even remotely by using mobile devices. Mobile devices are approaching as 'smart mobile innovation' to improve an enterprise productivity and competitiveness, but threats which engaged in unfair trading behaviors or unwholesome business works in finance companies are increasing and the customer's information can be leaked out by using the nonpublic official information and mobile devices. Therefore, we have to analyze the potential problems and take the necessary countermeasures with preemptive steps to protect the customer's information and improve the financial trading soundness and fairness. In this paper, we would like to suggest countermeasures and threats against using the financial company's mobile devices focusing on the financial investment companies by 'Capital Market and Financial Investment Business Act'.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.338-347
• /
• 2021

In this paper, the beta-ray sensor circuit used in the true random number generator was designed using DB HiTek's 0.18㎛ CMOS process. The CSA circuit proposed a circuit having a function of selecting a PMOS feedback resistor and an NMOS feedback resistor, and a function of selecting a feedback capacitor of 50fF and 100fF. And for the pulse shaper circuit, a CR-RC2 pulse shaper circuit using a non-inverting amplifier was used. Since the OPAMP circuit used in this paper uses single power instead of dual power, we proposed a circuit in which the resistor of the CR circuit and one node of the capacitor of the RC circuit are connected to VCOM instead of GND. And since the output signal of the pulse shaper does not increase monotonically, even if the output signal of the comparator circuit generates multiple consecutive pulses, the monostable multivibrator circuit is used to prevent signal distortion. In addition, the CSA input terminal, VIN, and the beta-ray sensor output terminal are placed on the top and bottom of the silicon chip to reduce capacitive coupling noise between PCB traces.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.7
• /
• pp.217-224
• /
• 2022

Today, with the development of technology and industry, fire accidents in special buildings are increasing as special buildings increase. However, despite the rapid development of information and communication technology, human casualties are steadily occurring due to the underdeveloped and ineffective indoor fire alarm system. In this study, we confirmed that the existing indoor fire alarm system using acoustic alarm could not deliver a sufficiently large alarm to the in-room personnel. To improve this, we designed and implemented a fire alarm system using edge computing and beacons. The proposed improved fire alarm system consists of terminal sensor nodes, edge nodes, a user application, and a server. The terminal sensor nodes collect indoor environment data and send it to the edge node, and the edge node monitors whether a fire occurs through the transmitted sensor value. In addition, the edge node continuously generate beacon signals to collect information of smart devices with user applications installed within the signal range, store them in a server database, and send application push-type fire alarms to all in-room personnel based on the collected user information. As a result of conducting a signal valid range measurement experiment in a university building with dense lecture rooms, it was confirmed that device information was normally collected within the beacon signal range of the edge node and a fire alarm was quickly sent to specific users. Through this, it was confirmed that the "blind spot problem of the alarm" was solved by flexibly collecting information of visitors that changes time to time and sending the alarm to a smart device very adjacent to the people. In addition, through the analysis of the experimental results, a plan to effectively apply the proposed fire alarm system according to the characteristics of the indoor space was proposed.

• Journal of the Institute of Convergence Signal Processing
• /
• v.12 no.4
• /
• pp.258-266
• /
• 2011

AR(Augmented Reality) technology is now easily shown around us with respect to its applicable areas' being spreaded into various shapes since the usage is simply generalized and many-sided. Currently existing camera vision based AR used marker based methods rather than using real world's informations. For the marker based AR technology, there are limitations on applicable areas and its environmental properties that a user could immerse into the usage of application program. In this paper, we proposed a novel AR method which users could recognize objects from the real world's data and the related 3-dimensional contents are also displayed. Those are done using image processing skills and a smart mobile embedded camera for terminal based AR implementations without any markers. Object recognition is done from the comparison of pre-registered and referenced images. In this process, we tried to minimize the amount of computations of similarity measurements for improving working speed by considering features of smart mobile devices. Additionally, the proposed method is designed to perform reciprocal interactions through touch events using smart mobile devices after the 3-dimensional contents are displayed on the screen. Since then, a user is able to acquire object related informations through a web browser with respect to the user's choice. With the system described in this paper, we analyzed and compared a degree of object recognition, working speed, recognition error for functional differences to the existing AR technologies. The experimental results are presented and verified in smart mobile environments to be considered as an alternate and appropriate AR technology.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.4
• /
• pp.24-35
• /
• 2011

This paper demonstrates a methodology of integrated operation and management system for intermodal connectivity center (ICC), which is planning to be build up as a large scale public transit facilities for green growth strategy by the national government. The ICC needs to be capable of providing the integrated location based information for the public transit users in terms of collaborating a variety of transit modes and complex facility in a large scale center. Recently, the upcoming information and communication technologies enable to come up with real time information provision on nomadic and portable devices, i.e. smart phones and/or tablet PCs, as what the users actually need to get on demand. In order to provide the public transit users in ICC with the integrated information on their smart phones for example, the integrated operation and management system plays a key role to collect the data utilizing the wireless communication with real time location tracking and to manage them to be effective and operational sources for applicable personalized services. Thus, this paper defines a type of services, subsystems, and relevant technologies for the system integration so called a "Smart Garatagi Service" and shows a filed test demonstration case in the existing airport terminal, Gimpo Domestic.

• The KIPS Transactions:PartC
• /
• v.10C no.6
• /
• pp.747-754
• /
• 2003

Thia paper suggests a milti user-authentication system comprises that DNA biometric informatiom, owner's RFID(Radio Frequency Identification) smartcard of hardware token, and PKI digital signqture of software. This system improved items proposed in [1] as follows : this mechanism provides one RFID smartcard instead of two user-authentication smartcard(the biometric registered seal card and the DNA personal ID card), and solbers user information exposure as RFID of low proce when the card is lost. In addition, this can be perfect multi user-autentication system to enable identification even in cases such as identical twins, the DNA collected from the blood of patient who has undergone a medical procedure involving blood replacement and the DNA of the blood donor, mutation in the DNA base of cancer cells and other cells. Therefore, the proposed system is applied to terminal log-on with RFID smart card that stores accurate digital DNA biometric information instead of present biometric user-authentication system with the card is lost, which doesn't expose any personal DNA information. The security of PKI digital signature private key can be improved because secure pseudo random number generator can generate infinite one-time pseudo randon number corresponding to a user ID to keep private key of PKI digital signature securely whenever authenticated users access a system. Un addition, this user-authentication system can be used in credit card, resident card, passport, etc. acceletating the use of biometric RFID smart' card. The security of proposed system is shown by statistical anaysis.