• 한국안전학회지
• /
• 제37권3호
• /
• pp.34-44
• /
• 2022

This study analyzed the smart construction safety cost included in safety management plans that are approved before construction. Specifically, it refers to the cost incurred in constructing and operating a safety management system using wireless communication and facilities. Based on the obtained statistical results, an activation policy for the inclusion of the smart construction safety cost in building safety management plans was proposed. The smart construction safety cost must be included in the safety management cost; notably, this is mandated by the Construction Technology Promotion Act. However, there are some problems with the inclusion of smart construction safety costs. To analyze the problems encountered when calculating the smart construction safety cost and including it in safety management plans, in this study, statistical analysis was performed using the data of 1,334 safety management plans received at the Construction Safety Management Integrated Information (CSI) from June to August 2021. The results show that only 50.7% of the safety management plans included the smart construction safety cost although the current law mandates 100% inclusion of these costs. Thus, it is apparent that the smart construction safety costs are only included in a low proportion of sites. In addition, the calculated smart construction safety costs were shown to have a small correlation with the construction cost; moreover, they appeared to be distributed at a constant cost level. In this context, it is believed that perfunctory cost calculations were performed at most sites since the effect of the construction cost on the smart construction safety cost was negligible. Therefore, it is necessary to improve the inclusion of smart construction safety costs by strengthening the authorization process of the approval institute of safety management plans. In addition, institutional support, such as guidelines that promote the calculation and inclusion of appropriate smart construction safety costs according to the characteristics of sites, are needed.

• 대한안전경영과학회지
• /
• 제26권2호
• /
• pp.43-53
• /
• 2024

This study analyzes the importance-performance analysis (IPA) of the 10 dimensions of the smart construction safety management system, and analyzes which dimensions are important and which dimensions are performing to determine key improvement tasks, incremental improvement tasks, Maintenance and reinforcement tasks and continuous maintenance tasks were derived. Among the 10 dimensions of the smart construction safety management system, the dimensions that are recognized as important by all field managers and field workers and have high performance are the automatic risk displacement measurement system, smart environmental sensor system, and heavy equipment seizure prevention system. However, areas that were perceived as having high importance but low performance were worker location tracking systems, smart safety helmet chin muscles, and smart safety ring fastening. Among the smart construction safety management systems perceived by field managers, areas for key improvement with high importance and low performance included worker location tracking system and smart safety ring fastening. Among the smart construction safety management systems perceived by field workers, the area for key improvement with high importance and low performance was the automatic risk displacement measurement system.

• Journal of Construction Engineering and Project Management
• /
• 제2권3호
• /
• pp.48-57
• /
• 2012

With increasing number of serious construction disasters such as death, a safety management in real-time is more required recently. One of the ways to support the needs, a convergence with Information Technology (IT) has been noticed. Although number of inefficiencies including a limitation of IT equipment (weight, control inconveniences) has been concerned, data exchanging and processing fields have been improved at a wide range with an advance of mobile communication and an introduction of smart mobiles that are simple and convenient. In this research, a framework is realized in connection with smart mobile to find the problems of current safety management and derive demands in order to support effective safety management. Two smart mobile applications, Safety Management application and Safety Guideline application, enable a real-time safety management and less re-work by provided safety information.

• 품질경영학회지
• /
• 제49권2호
• /
• pp.127-143
• /
• 2021

Purpose: Smart Safety Living Lab is a Living Lab facility, constructed and operated by KITECH in Korea, to support the user experience(UX) evaluation, planning and certification of smart safety products and services. The purpose of this study is to develop a UX evaluation methodology that accommodates the characteristics of the Living Lab and smart safety products and services for a systematic and efficient UX evaluation in the Smart Safety Living Lab. Methods: A generic model of UX evaluation was first derived based on a review of related literature. Then, the generic model is revised to accommodate the characteristics of the Smart Safety Living Lab and smart safety products and services, resulting in the UX Evaluation Methodology for Smart Safety Living Lab (SSLL-UXEM). Results: The developed SSLL-UXEM consists of a structured process for UX evaluation, a guideline for conducting each step of the process, and a set of forms for recording the major evaluation results in each step. Conclusion: SSLL-UXEM can help to enhance the efficiency of the UX evaluation process and the consistency of the UX evaluation results. SSLL-UXEM is also expected to serve as a basis for UX evaluation in various living lab environments in the future.

• 전기학회논문지P
• /
• 제59권3호
• /
• pp.340-344
• /
• 2010

In order to achieve purpose of Smart Grids, which is effective use of electrical energy, the safety of electrical installations must be secured. This paper presented real time monitoring and management method for electrical safety of customer electrical installations connected to Smart Grids. And the direction of electrical safety system for the introduction of real time monitoring and management method was suggested. Efficiency improvement of electrical safety management and new supplementary services related with Smart Girds will be available by introducing the presented method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.297-298
• /
• 2021

The construction industry is a representative high levels of hazardous work environment, and the number of disasters in the construction industry is the highest compared to other industries. Information & Communication Technology(ICT) convergence technologies are being introduced worldwide, and this study considers ICT-based safety management cases at domestic and foreign, resulting in a list of technologies to recognize and resolve to construction site hazards. Technologies such as 「Development of hazard map considering cause, age, proficiency, type and timing of accident in construction industry」, 「Development of hazard map-based accident prediction platform using AI」, 「Development of smart safety management plan for whole construction work cycle」, 「Development of intelligent safety devices and smart safety equipment for mitigating hazard factors」 were derived as smart construction technologies that could solve this problem.

• 한국항공운항학회지
• /
• 제32권3호
• /
• pp.171-179
• /
• 2024

Aircraft ground services are essential to the aviation industry and aviation services, yet management systems and improvement measures for operations and safety have not been adequately addressed in the revision of the old aviation law. This study utilized structural equation modeling and the UTAUT model to analyze the perceived acceptance of smart safety technologies among ground handling service workers. The findings indicated that perceived ease of use had a more significant than perceived usefulness impact on the acceptance of smart safety technologies among ground handling service workers. In light of these findings, it is recommended that the aviation safety management authority establish a policy vision for the adoption of smart safety technologies and consider implementing measures such as the introduction of smart safety technology test beds to enhance safety management and work efficiency of aircraft ground handling services.

• 한국안전학회지
• /
• 제35권6호
• /
• pp.46-53
• /
• 2020

The domestic construction industry is becoming larger, high-rise and specialized. However, safety consciousness is still staying in low levels and falling accidents are apt to rise compared to other industries. So, the new way of safety management is required for reducing of the construction falling accidents. In this paper, we evaluate appropriateness of safety management on construction sites utilizing USN using smart safery equipment. Thus, we calculate loss costs of falling accidents considering accident rates and costs of the USN using smart safery equipment installation then compare both calculated costs. This research aims to propose the method for reduction of construction accidents in addition to conventional safety control methods by analyzing the propriety of applying USN using smart safery equipment on construction sites.

• 품질경영학회지
• /
• 제50권4호
• /
• pp.679-700
• /
• 2022

Purpose: Smart lighting adjusts brightness and color temperature according to weather, the user's activity, mood, etc. This study performed user experience(UX) evaluation of smart lighting in a living lab. The purpose of evaluating UX and analyzing the evaluation results is to improve user-friendliness and market competitiveness of smart lighting Methods: A living lab is a virtual or physical space where various stakeholders participate to develop, verify, and evaluate products, services, or systems in a real-life environment. In this study, an environment of using smart lighting was established in the Smart Safety Living Lab. Subjects performed UX evaluation after interacting freely with smart lighting in the Smart Safety Living Lab. Results: As a result of UX evaluation, it was confirmed that UX was overall excellent and subjects were satisfied with setting a desired indoor mood through smart lighting. However, operating the switch of smart lighting may be difficult due to its complexity, and it is needed to improve some functionalities such as the brightness range provided by smart lighting. Conclusion: This study is expected to contribute to establishing the way of UX improvement of smart lighting. This study is also expected to contribute to developing smart lighting as a high-quality product by reflecting the subjects' needs and UX derived in a real-life environment.

• 대한안전경영과학회지
• /
• 제23권4호
• /
• pp.1-9
• /
• 2021

This study examines the trends of domestic and foreign smart industries and discusses safety and security issues. Based on the actual situation survey and interview of the smart factory, we would like to examine the perspectives on risks and threats. We will examine safety and health issues related to new harmful and risk factors that may occur in smart factories and suggest institutional development directions for future safety and health. First, a safety and health-related work environment for smart factory workers is investigated and interviews are conducted. Second, we investigate new risk factors and threats to prevent industrial accidents for workers in smart factories. The purpose of this study is to examine what are the new risk factors in the smart factory. In addition, we will try to find reasonable improvement measures by finding out the risks and threats of smart factories through case studies in advanced countries, on-site interviews and surveys.