• International journal of advanced smart convergence
• /
• v.12 no.4
• /
• pp.1-7
• /
• 2023

Large-size, organic light-emitting device (OLED) panels based on highly reliable gate driver circuits integrated using InGaZnO thin film transistors (TFTs) were developed to achieve ultra-high resolution TVs. These large-size OLED panels were driven by using a novel gate driver circuit not only for displaying images but also for sensing TFT characteristics for external compensation. Regardless of the negative threshold voltage of the TFTs, the proposed gate driver circuit in OLED panels functioned precisely, resulting from a decrease in the leakage current. The falling time of the circuit is approximately 0.9 ㎲, which is fast enough to drive 8K resolution OLED displays at 120 Hz. 120 Hz is most commonly used as the operating voltage because images consisting of 120 frames per second can be quickly shown on the display panel without any image sticking. The reliability tests showed that the lifetime of the proposed integrated gate driver is at least 100,000 h.

• Knowledge Management Research
• /
• v.24 no.1
• /
• pp.51-72
• /
• 2023

Digital literacy is vital knowledge and ability of an individual in the information society. As the level of digital literacy increases, the interest in privacy protection increases. This change may hinder the use of digital technologies and services. This research examines (1) the mediating effect of online social participation and information veracity on smart device literacy and privacy concerns, and (2) the moderating effect of privacy literacy. Using Korean media panel survey data reported in 2020 and in 2021, this study analyzes the responses of 7,737 people who use smart devices and participate in online activities. SPSS and PROCESS Macro are used to test the research model and hypotheses. In the analysis of 2020 and 2021 survey, this research shows that smart device literacy has major effects on privacy concerns; confirms that the mediating effect of online social participation; moderated meditating effect of privacy literacy. Although information veracity is not significant in 2020, mediating and moderated mediating effects are found in 2021.

• The Journal of the Korea Contents Association
• /
• v.20 no.4
• /
• pp.348-357
• /
• 2020

Discussions on entrepreneurship are increasing, but the methodology that can be applied to actual small to mid-sized businesses and venture firms is insufficient, and research on measuring achievement and application is lacking. In this regard, this paper analyzed actual proof on the relationship among entrepreneurial orientation, R&D capabilities, market share, and the creation of BSC future values that can be empirically applied to small to mid-sized businesses and venture firms. A factor analysis and hypothesis verification have been conducted with the SEM model utilizing SmartPLS 3.0 on the recent 7th year (2017) data from the Human Capital Corporate Panel (HCCP) of the Korea Research Institute for Vocational Education and Training. The actual proof analysis revealed that entrepreneurial orientation creates a positive influence on R&D capabilities and the creation of BSC, and also on market share, with R&D capabilities as a parameter. On the other hand, the relationship between entrepreneurial orientation and market share proved to be not statistically meaningful. Future value creation of BSC also could not mediate the relation between entrepreneurial orientation and market share. Therefore, this research has proven that a company must cultivate its personnel's R&D capabilities with their entrepreneurial orientation. Furthermore, it is a significant fact that BSC, the conventional measuring tool for performance management, could not mediate the relationship between entrepreneurial orientation and market share. Future companies aiming at innovation should consider developing a new index that could measure the corporate-level entrepreneurship and conduct performance management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.562-568
• /
• 2017

A precast floating slab track with a 5m slab panel and installed with isolators is proposed to solve the noise and vibration problem at existing elevated railway stations. Thus, the construction can be carried out rapidly without interrupting the train operation. However, dynamic instability problems may be caused by repeated discontinuities in track due to the short slab panel length and excessive rail displacement due to the inherent operation mechanism of a floating system in reducing the vibration. Furthermore, the difference of the supporting stiffness at the transition between the floating track and ballast track may raise problems. In this study, the assessment factors to evaluate the dynamic stability of the precast floating slab track are presented and assessed with the vehicle-track interaction analysis. Through the analysis, all values relevant to the stability at the floating track section are found to be acceptable, and the slab panels at the transition section are designed to satisfy the stability.

• Smart Media Journal
• /
• v.11 no.10
• /
• pp.9-21
• /
• 2022

The recent expansion of the use of social media has served as an opportunity to express users' opinions in real time in various fields such as society, economy, politics, and culture, and brought many platforms that provide various information about companies. Among them, Glassdoor.com which started 2008 in US provides users with evaluations of the current and the former employees of their companies and also provides a outlooks for the company's growth Such a platform has the utility of providing necessary information to whom want to find a job or change jobs. In addition to this, variable studies have shown that the company information provided through these platforms is useful for investors as well. In this study, it was tested whether the corporate growth prospects of employees provided by Jobplanet, a platform with a typical function similar to Glassdoor.com in Korea, have predictive power to predict actual corporate growth. The forecast provided by Jobplanet and the company's financial indicator data received from FnGuide were collected and composed of panel data and analyzed using fixed effect model regression analysis. As a result, it was found that companies with positive prospects had higher employment growth than companies with negative prospects. When the outlook was neutral, the employment growth rate was higher than that of companies with a negative outlook.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.600-603
• /
• 2008

In this paper, a new circuit design named memory-in-pixel for low power consumption of the liquid crystal display (LCD) is presented. Since each pixel has a memory, it is able to express 8 color grades using the data saved in the memory without the operation of the gate and source driver ICs so that it can reduce the power consumption of the LCD panel. A memory circuit consists of modified S-R flip-flop (NAND-type) implemented in the pixel, which can supply AC bias for operating the liquid crystal (LC) with the interlocking clocks (CLK_A and CLK_B). This circuit is more complex than the inverter-type memory circuit, but it has lower power consumption of approximately 50% than the circuit. We have investigated the power consumption both NAND and inverter-type memory circuit using a Smart SPICE for the resolution of $96{\times}128$. The estimated power consumption of the inverter-type memory was about 0.037mW. On the other hand, the NAND-type memory showed power consumption of about 0.007mW.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.39-44
• /
• 2011

This purpose of this study is to propose the characteristics analysis of the PCB pattern designed two modes for the output voltage value on the PMIC through converting the limited voltage value inputted from a battery. The PCB design technology has been undergoing difficulty in getting the related technology in a domestic market because of increasing EMI/EMC, Cross-talk, Impedance. And it requires to have the appropriate clearance between the patterns and the technology of PCB pattern width with a amperage according to various uses. The study carried out the characteristics analysis of the PCB pattern designed from a direct output method without a capacitor[mode1], to an output method through a capacitor[mode2] for PMIC output voltage value. Besides, we calculated the pattern width with a amperage using the equation suggested by IPC-2221, presenting the right way of the layout design to analyze the trouble with the test. Therefore, this study is expected to contribute not only to applying the PMIC design for the mobile panel power supply, but also helping the design and application technology in various areas such as car control, camera, note-book, computer, PDA, etc.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.53-60
• /
• 2020

In this study, smart precast-in-place concrete, such as continuity with Precast any technology that can be the Application of Building Structures and railway stations, civil structures. After the same way in the field installation design based on the criteria railways and derived the right section, through the Static and Dynamic Response Analysis. Dynamic sensor and the triaxial acceleration measured by attaching the sensor acceleration response according to the extent of the damage of Precast Panel Structures and mode of Precast Structures, by comparing the data. Data for the stability and improvement of the uncertainty in along a railroad and Future of Precast Panel Structures of time to replace. This is to use this data as basic data on damage prediction.

• Design & Manufacturing
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2017

In these days, due to generalization of using smart mobile phone and wearable device such as smart watch, demand of Cover-glass and touch screen panel for protecting display increases. With increasing the demand of Cover-glass, slimming technique is promising for weight lightening, zero bezel. Cover-glass produced by this technique is required to decreasing thickness with increase strength. In the Cover-glass manufacturing process, mechanical processing and chemical processing has improve in the strength. Generally, Diamond electrodeposition wheel is used in mechanical process. Reinforced glass with the characteristics of the brittle and high hardness was manufactured by using a diamond electrodeposition wheel. At this time, Because of surface of the tool present non-uniform distribution of diamond particle, it has generate Loading of wheel and it has been decrease life of grinding tool, efficiency of grinding, quality and shape accuracy of workpiece. Thus Research is needed to controling particle distribution of diamond electrodeposition wheel uniformly. And it is necessary to study micro hole machining such as proximity senser hole, speaker hole positioned Cover-glass. Reinforced glass with the characteristics of the brittle and high hardness is difficult to machining. Processing of reinforced glass have generated wear of tool, micro cracks. Also, it is decreasing shape accuracy. In this paper, We conducted a study on how to control particle distribution uniformly about the diamond tool manufactured using elecetodeposition processing. It analyzed the factors that affect the arrangement of the particles in the electrodeposition process by design of experiment. And There is produced the grinding tool, which derives an optimum deposition conditions, for processing Cover-glass edge and the machinability was evaluated.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.5
• /
• pp.49-58
• /
• 2019

Purpose - Consumer behaviors or decision-making process has been changing recently as the consumer environment, including mobile everyday life, has changed. In view of this changing consumer smart environment, this study aims to investigate structural relation about the influence omni-channel propensity and regulatory focus on consideration set formation. Research design, data, and methodology - In order to proceed with this study, we review previous studies and setting hypotheses. The hypothesis was verified through a survey that was conducted for university students with experience in purchasing in less than three months. With reference to previous studies, operational definition was made for the questionnaire design. From 2018 Nov. to 2019 Feb. Survey was conducted on the panel consumers who purchase item within that period. 315 collected survey data were used to verify hypotheses except the data that had incorrect values. This data were used for SPSS/AMOS for confirm hypothesis which developed by researcher. Results - The results of this study are as follows. First, Consumers were considering a more heterogeneous alternatives if they were more omni-channel propensity in the process of forming consideration set. Second, Consumers were more conscious of the price if they were more omni-channel propensity Third, Consumers were considering a more newness alternatives if they were more omni-channel propensity in the process of forming consideration set. Meanwhile, The results of the study on regulatory focus and consideration set relationships are as follows. Consumers were considering a more heterogeneous alternatives if they were more promotion focus tendency in the process of forming consideration set. Second, Prevention focus tendency were more conscious of the price in the process of considering alternatives. Third, Consumers were considering a more newness alternatives if they were more promotion focus tendency. Conclusions - Depending on the changing consumer environment, the omni-channel propensity was shown to influence the formation of the consideration set. Also, Regulatory focus of consumers significantly influence to formation of consideration set. this study also contributes to the development of the theory as well as the practical approach with understanding consumer decision process on smart(mobile) environment.