• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.3
• /
• pp.693-699
• /
• 2024

The main cause of scattering dust generated by transportation equipment such as automobiles was largely due to exhaust gas from internal combustion engines in the past, but it was generally recognized that non-exhaust causes such as abrasion of the tires or brake pads were low. Accordingly, scattering dust generated by exhaust gas has consistently existed in many studies, such as technological progress and related regulations, but research on non-exhaust is relatively insignificant, and the need for research on scattering dust generated by non-exhaust is emerging. In this study, a dust collector that can be easily mounted on a caliper to collect scattering dust generated by pad wear during the brake operation of an automobile was manufactured. In this study, we developed a dust collector that is easy to mount on calipers to collect scattering dust caused by pad wear during brake operation of automobiles. According to the installation of the manufactured dust collector, the performance of scattering dust by brake operation and the temperature change characteristics of calipers according to the structure of the dust collector were evaluated.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.5
• /
• pp.558-566
• /
• 2024

This study proposes method for enhancing the performance of previously developed or produced weapon systems without developing new detection equipment by using Phase Gradient Metasurfaces(PGMS). Metasurface has been studied and utilized a lot to improve the detection performance of inorganic systems, but its utilization is low due to its narrow bandwidth and complex structure. To address some of these limitations, dual-band power focusing PGMS is proposed. Its frequency independent unit cell characteristic enables creating metasurface that concentrates signals in dual-band. The designed PGMS was validated through near-field and far-field measurement, confirming signal concentration at the specified focal length and improved gain in the dual bands.

• Nuclear Engineering and Technology
• /
• v.56 no.10
• /
• pp.4227-4236
• /
• 2024

Nuclear energy is used more and more widely as a clean energy source, but nuclear energy facilities are risky, and when a nuclear leak occurs, it is necessary to detect equipment in a nuclear radiation environment. In the nuclear radiation environment, due to the impact of high-energy particles on the camera sensor, the collected image contains a lot of radiation noise, which greatly reduces the visual perception of the image. Aiming at the problem that radiation noise reduces image quality, a radiation image compound filtering algorithm combining median filtering and multi-frame average filtering is proposed based on radiation noise characteristics. Compared with several common filtering algorithms, the radiation noise image is filtered under the same radiation dose and achieve the highest Peak Signal Noise Rate (PSNR) and Structural Similarity (SSIM), and compared with the multi-frame average filtering method, the number of image frames required by the algorithm in this paper is greatly reduced. Experimental results show that the algorithm can effectively eliminate radiation noise and is more suitable for image filtering in radiation environment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.1
• /
• pp.27-40
• /
• 2022

Building self-sustainable rural infrastructure and environment through smart digital agriculture technology innovation is one of the major goals of the Korean agricultural administration as a part of the nation's 4^th industry revolution. To identify areas for improving and effectively investing in the acceleration of rural development, 207 experts in the areas of crop science and smart digital agriculture technology were interviewed for their opinions and suggestions on 22 questions designed to recognize fundamental agricultural issues to be addressed and solutions to advance technology innovation and rural development. Majority of the participants expected smart digital agriculture technologies to resolve major agricultural issues and help build a better rural environment. To overcome technology gaps and resolve issues more effectively, further investment in training new technology experts and building stronger agricultural technology infrastructure is urgent, and persistent and systematic support from agricultural administration appears to be the key for accelerating the process. While the leading global groups of both public and private sectors have advanced their technologies beyond the field application stage, most of the Korean technologies remain at the early pilot stage. Aging population and lack of labor in rural areas, unknown future climate change, and challenges in sustainable rural development are expected to be resolved by smart digital agriculture technologies. Technological innovations by research institutes should be promptly deployed in the crop production field, and farm training systemically organized by local technology centers can accelerate farming revolution. Standardization of equipment and data systems is another key to the success of digitalization of food crop production and food supply chains nationwide.

• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.25-32
• /
• 2016

The current research was to investigate the effects of discussion activities based on Havruta style on elementary school students' social studies communication skills. For this purpose, we examined a comparative study between 5th grade students and other students of partner schools. As research results, first, online classes using video conference equipment and smart devices will enhance the students' interest and participation in class. Second, the Havruta style helps students not only acquire and internalize knowledge by themselves through the course of reciprocal questions and discussions but also improve presentations and participations. Third, it is necessary not only to draft a new lesson plan and to reconstruct the education process for video and online classes but also to develop the classes with a lesson plan after preparations and discussions with colleague teachers; the process of reflection, such as writing a lesson research journal, has a positive effect to improve the quality of cooperative classes. Fourth, using SNS discussion activities to serve as a complementary activity is good, and two teachers can evaluate each of the students' achievement. It is necessary to have a sufficient number of schools where video and online cooperative learning is possible with video equipment provided. To maximize the effect of video and online classes, various studies and teacher trainings are needed. Education office needs to provide a server that enables students in small and large classes to freely engage in cooperative learning.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.77-85
• /
• 2018

Recently, many people have attempted to combine the 4th industry in various fields. Citizen participation has also become more important in the policy making and decision making process. Therefore, this study examined ways to encourage citizen participation by integrating the 4th industry in the field of urban planning and design. The research method was to design street space using virtual reality, and to examine the preference of design and the satisfaction of using a virtual reality device for Cheongju citizens and residents. The main result is that the use of VR in the design process of street space can achieve a sufficient outcome in terms of inducing resident participation. The opinions of the respondents before and after the VR experience were different from each other. After the VR experience, understanding, participation and interest in design were improved. On the other hand, during the course of the study, there are many difficulties in obtaining a place that satisfied the conditions of the PC-VR equipment. Although it can be used by connecting a smart phone and a VR device, the constraint of free movement and degradation of the graphic quality are inevitable. In addition, it is difficult to operate simple interfaces because VR devices are not yet popularized. Accordingly, it will be necessary to popularize and commercialize VR equipment and establish a legal basis.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.5
• /
• pp.437-442
• /
• 2013

Objective: The objective of this study was to investigate the effects of drive-assisting system in a shower carrier on the upper body muscle activities of caregivers through drivability tests. Background: In care facilities, one of the major ADL (Activities of Daily Living) factors is bathing/showering. Recently, bath/shower-assisting equipment is actively being introduced in care facilities to reduce caregivers' muscle burden. In particular, it is desirable to utilize a shower carrier equipped with drive-assisting system to effectively care for the elderly. However, there were few systematic studies on the relationship between muscle activities and drive-assisting speeds. Method: For the drivability tests to study the effects on the muscle activities according to the drive-assisting speeds(corresponding drive-voltages: 0.0V, 2.0V, 2.1V, 2.3V), 6 females in their 40s($43{\pm}4yrs$, $157{\pm}5cm$, and $54.5{\pm}1.5kg$) were selected. To measure muscle activities of caregivers through drivability tests, 7 muscles in the upper body(TM/Trapezius Muscle, DM/Deltoid Muscle, BBM/Biceps Brachii Muscle, TBM/Triceps Brachii Muscle, ECRLM/Extensor Carpi Radialis Longus Muscle, FCUM/Flexor Carpi Ulnaris Muscle, and ESM/Erector Spinae Muscle) were selected. Results: In the TM, muscle activities were decreased as 21% compared to 0.0V, when drive-voltage 2.0V was applied, as 57% by 2.1V, and 62% by 2.3V(p<0.05), whereas 40%, 56%, and 69% of muscles activities were decreased respectively from the DM(p<0.05). Also, from the UL(BBM+TBM+ECRLM+FCUM), muscle activities were decreased by 17% with 2.0V as against 0.0V, by 47% with 2.1V, and 52% with 2.3V, whereas decreases in muscle activities from the ESM were found by 20%, 34%, and 42% respectively by 2.0V, 2.1V, and 2.3V(p<0.05). Conclusion: The muscle activities were decreased in the order of the DM, TM, ESM, and UL. As muscle activities were remarkably reduced as drive voltage were increased, it was expected to reduce the upper body muscle burden on the caregivers when using shower carriers equipped with driving-assist system. Applications: The results from this study can be applied for the development of a shower carrier including other equipment to possibly reduce the muscle burden of the caregivers.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.3
• /
• pp.231-239
• /
• 2021

Entering the era of the fourth industrial revolution, information and communication technologies such as CCTV, home network systems and equipment are being used in the construction industry. In particular, in order to increase the autonomy of information and communication technologies in apartments, the government has announced an administrative revision of information and communication-related laws, and companies are focusing on developing technologies such as smart home services. In addition, most domestic and foreign studies on the information and communication work were mainly conducted on technology and management. However there is a lack of research on physical defects affecting the quality of ICT. Therefore, this study collected the defect data registered in the project management system of three domestic construction companies and classified them according to the standards of the Enforcement Decree of the Apartment House Management Act. According to the analysis of the frequency of defects work type, 88.10% of defects occurred in home network equipment work. In addition, analysis of defects type in the four detailed works showed the highest number of operation error. The cause was analyzed and prevention measures and countermeasures were presented in parts of design, construction, and maintenance. The results of this study will improve the quality of apartment housing and be used as basic data for future research on practical defect minimization and prevention measures.

• Journal of Internet Computing and Services
• /
• v.24 no.1
• /
• pp.1-7
• /
• 2023

Recently, the technology of device-to-device(D2D) communication has been receiving big attention to improve the system performance since the amount of high quality/large capacity data traffic from smart phones and various devices of Internet of Things increase rapidly in 5G/6G based next generation cellular networks. However, even though the system performance of macro cells increase by reusing the frequency, the performance of macro user equipments(MUEs) decrease because of the strong interference from D2D user equipments(DUEs). Therefore, this paper proposes a dynamic channel management(DCM) scheme for DUEs to guarantee the performance of MUEs as the number of DUEs increases in next generation downlink cellular networks. In the proposed D2D DCM scheme, macro base stations dynamically assign subchannels to DUEs based on the interference information and signal to interference and noise ratio(SINR) of MUEs. Simulation results show that the proposed D2D DCM scheme outperforms other schemes in terms of the mean MUE capacity as the threshold of the SINR of MUEs incareases.

• Journal of Service Research and Studies
• /
• v.13 no.3
• /
• pp.147-159
• /
• 2023

This study is a study to develop a model for measurement and processing of experience data, which is emerging as a core value in quality management of medical services. In the theoretical background, a literature study was conducted on the importance of experience in medical service, measurement and processing of experience data, and realization of patient-centeredness. Based on these literature and theoretical background research results, operational definitions were performed for the following four research variables, and statistical tests were conducted. Hypothesis 1 is the effect of measuring experience data from the perspective of three factors on persona modeling, Hypothesis 2 is the effect of persona modeling on service blueprint visualization, Hypothesis 3 is the effect of service blueprint visualization on realization of patient-centeredness, and Hypothesis 4 is persona modeling This is the effect that modeling has on the realization of patient-centeredness. After data-based testing of factor analysis, reliability analysis, and correlation analysis, all four hypotheses were adopted as a result of verification using regression analysis. In conclusion, in an era where it is difficult to recognize the value of having only good medical staff and medical equipment in hospitals, it was possible to grasp the meaning that what kind of medical service experience is continuously obtained is more important to patients than the effectiveness of medical staff and medical equipment. In the era of the service economy, the core of hospital service competitiveness is providing attractive experiences, which is the real strength of hospitals, so the measurement and processing of experience data, which is the subject of this study, will have an important meaning in realizing patient-centeredness and realizing smart hospitals.