• 산업기술연구
• /
• 제15권
• /
• pp.83-91
• /
• 1995

This paper presents the design of a smart A/D conversion interface used for measuring the load of a truck. Since the load-cell sensor to be used is very sensitive for weight variation, the interface board must have the low-drift and the A/D conversion for accuracy. A new integrator and comparator has been developed to reduce the offset voltage and the drift current of operational amplifiers and has been adapted into the interface board. Also, a software algorithm has been developed to obtain the stable and accrurate A/D conversion. This software includes a RS-485 communication program to control the interface, which gives a capability of backing-up the calibration data and transferring control data. The test and evaluation of the designed interface has been shown as having the better performance compared to the other types of existing weighing systems and sensor instruments.

• 한국전기전자재료학회논문지
• /
• 제34권2호
• /
• pp.110-114
• /
• 2021

In this study, we fabricated light-weight solar module for various applications such as building integrated photovoltaics (BIPV), vehicles, trains, etc. Ethylene tetra fluoro ethylene (ETFE) film was applied as a material to replace the cover glass, which occupies more than 65% of the weight of the PV module. Glass fiber reinforced plastic (GRP) was applied to the ones with a low durability by replacing the cover glass to ETFE. Moreover, to achieve a high solar power conversion in this study, we applied a shingled design to weight reduced solar modules. The shingled module with GRP shows 183.7 W of solar-to-power conversion, and the output reduction rate after weight load test was 1.14%.

• 정보처리학회논문지B
• /
• 제15B권3호
• /
• pp.189-196
• /
• 2008

본 논문에서는 A/D 변환기, 모션 예측 회로와 ROI(Region of Interest) 탐지를 위한 주의 모듈로 구성된 CMOS 디지털 이미지 센서를 소개한다. 현재 논문에서 제시하고 있는 이미지 센서의 A/D 변환기와 모션 예측 기능은 하드웨어인 $0.6{\mu}m$의 CMOS 프로세싱 회로(processing circuit)로 구현되어 있으며, ROI 탐지는 주의 모듈로서 소프트웨어로 구현되어 있다. 현재의 이미지 센서는 명암도의 변화에 반응하며, 모션을 예측하기 위해 시간정보를 사용하기 때문에 이미지 센서의 응용분야는 한정되어 있다. 센서라는 본래의 특징을 가지게 하면서 이의 응용분야를 확장하기 위하여 정지영상 및 동영상을 위한 특징기반 주의 모듈을 사용하여 이미지 센서에 인지기능을 부여하고자 한다. 이러한 접근법을 통해 이미지 센서는 모션이 예측되지 않다거나 명암도 변화가 감지되지 않을 경우에도 부가적인 기능을 할 수 있다. 실험결과를 통해 현재 구현된 이미지 센서의 효율성 및 다양한 분야로의 확장가능성을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.403-406
• /
• 1998

There are two cases of error occurrence of STT(Smart Temperature Transmitter). One is that because of unstable reference voltage, data from A/D converter is not reliable. The other is that because of change of room temperature, this change affects conversion of A/D converter. In this paper, we show algorithms be adapted to STT for reliable conversion of A/D converter through a experiment and compensation for temperature change. In a experiment, we collect data from reference voltage and ground then calculate nominal value of these at constant temperature during A/D converter initialization or at any conversion time. Algorithm for compensation for unstable reference voltage calculates a correction factor and adapts it to compensation for malfunction of A/D converter. Algorithm for compensation for variation of room temperature is come from linearization of thermistor but is adapted to zener diode, not thermistor, therefor we have less effort for compensation for temperature and have a idea that it can be adapted to A/D converter system.

• 산업기술연구
• /
• 제17권
• /
• pp.95-101
• /
• 1997

A smart pressure measurement system is described, which provides a precise A/D conversion and is highly suitable for communication with microprocessors. In order to avoid unstable problems of remote pressure sensing we have developed a new interface board which performs the A/D conversion and smart signal processing of the measured pressure data. Serial communication software which is based on ASCII code commands is also developed to process initial setup and calibration functions as well as multi-drop communication with PC. The test and evaluation of the proposed system has been shown as having the better performance compared to the other types of existing pressure measuring systems and will give good applications to the industrial use where a highly precision remote sensing is needed.

• Current Photovoltaic Research
• /
• 제8권4호
• /
• pp.120-123
• /
• 2020

Transparent photovoltaics (PV) are used in various applications such as building-integrated photovoltaics (BIPV). However, crystalline silicon (c-Si) is not used for developing transparent PV due to its opaque nature. Here. we fabficate the three holes in 6-inch c-Si solar cells using laser scribing process with an opening area ratio of about 6.8% for transparent c-Si solar modules. Moreover, we make the shingled strings using the perforated cells. Our 7 interconnected shingled string PV cells with 21 holes show a solar to power conversion of 5.721 W. In next work, we will fabricate a transparent c-Si PV module with perforated strings.

• 산업기술연구
• /
• 제22권A호
• /
• pp.89-94
• /
• 2002

In this paper, a Exhaust Flow Controller (EFC) technology for uniform application of film coater and developer device is introduced that spread and remove photo resister at semiconductor manufacturing process. Because developed EFC device uses differential pressure sensing method as a differential flow meter and embodied smart A/D conversion by using a one chip microprocessor and devised by feedback Servo control, It has shown excellent performance and stability evaluation, as maximum 2000L/min flow, capability of installation to actual semiconductor equipment.

• 스마트미디어저널
• /
• 제3권1호
• /
• pp.52-62
• /
• 2014

입체 디스플레이 보급의 보편화가 진행됨에 따라, 입체 콘텐츠의 수요가 증가하고 있다. 이러한 증가에 맞추어 2010년도를 기점으로 2D to 3D 변환 콘텐츠가 부족한 수요를 충족시킬 대안으로 제시되었다. 그러나 입체효과만을 강조한 2D to 3D 변환콘텐츠가 생산되면서 시각적 피로도와 입체감에 대한 품질의 저하가 문제로 지적되고 있다. 본 연구에서는 2011년 개봉한 '명장 관우'에서, 13개 Scene을 선별하여 입체 변환 콘텐츠로 제작하고, 변환에 적용된 Depth-Map의 품질이 시각적 피로도와 입체감을 표현하는데 있어서, 적정성을 가지는가의 여부를 전문가 그룹을 대상으로 인터뷰 및 설문조사를 시행하였다. 움직임의 변화가 많은 영상에 적용한 Depth-Map의 구성방식은 입체변환 기술에 많이 사용되는 방법으로 전(前) 후(後)관계의 분석을 통해 계단식 구성방식으로 깊이 단계 지도를 제작하게 된다. 실험을 통하여, 본 연구에서 제시한 Depth-Map의 구성이 입체변환 콘텐츠 제작에 있어 시각적 피로도를 낮추고 입체감 향상에 타당한지에 대한 결과를 도출하였으며, 실험에 응한 전문가 그룹의 과반수이상이 긍정적인 반응을 표시하였다. 본 연구의 결과 빠른 움직임을 가지는 2D영상을 3D영상으로 변환하는데 적용한 계단식 Depth-map의 구성방식으로도 시각적 피로도를 감소시키고, 입체감 인식을 증가시키는데 효율성을 가진다는 결과를 도출하였다.

• 산업기술연구
• /
• 제25권A호
• /
• pp.183-189
• /
• 2005

In precision instrumentation system, an A/D conversion of signal conditioning has some problems.; offset and drift errors with environmental situation. This paper suggested a development of the Multi-Channel A/D Data Acquisition System and a method of the evaluation and the temperature compensation for the A/D converters with the specific analog and digital circuit including the software. Also, we have designed a hardware and a software filters with smart algorithm for better signal processing of the proposed system. Software approach was adopted to obtain the stable data from A/D converter. As shown in our experimental works, the proposed system is expected to be used in the industrial field where a high precision measurement is required.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1564-1567
• /
• 1998

This paper presents a smart thin film pressure transducer which is highly suitable for a precise and remote measurement of pressure and has the following smart functions: automatic zero tracking, automatic span adjustment, temperature compensation, continuous self-diagnostics for faults(open strain gages, abnormal data, incorrect A/D conversion, and overpressure), data memory and multi-drop communication with PC.