• 제목/요약/키워드: Small-size bus

검색결과 36건 처리시간 0.037초

A Modularized Two-Stage Charge Equalization Converter for Series Connected Lithium-Ion Battery Strings

  • Kim, Chol-Ho;Park, Hong-Sun;Moon, Gun-Woo
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2008년도 하계학술대회 논문집
    • /
    • pp.535-537
    • /
    • 2008
  • This paper proposes a modularized two-stage charge equalization converter for a series-connected lithium-ion battery string. In this paper, the series-connected battery sting is modularized into M modules, and each module has K cells in series. With this modularization, low voltage stress on the electronic devices can be achieved. A two-stage dc-dc converter with cell selection switches is employed. The first stage dc-dc converter steps down the high bus voltage to about 10 V. The second stage dc-dc converter integrated with selection switches equalizes the cell voltages. A prototype for 88 lithium-ion battery cells is optimally designed and implemented. Experimental results verify that the proposed equalization method has good cell balancing performance showing low voltage stress, small size, and low cost.

  • PDF

A Practical Exciter Model Reduction Approach For Power System Transient Stability Simulation

  • Kim, Soobae
    • 조명전기설비학회논문지
    • /
    • 제29권10호
    • /
    • pp.89-96
    • /
    • 2015
  • Explicit numerical integration methods for power system transient stability simulation require very small time steps to avoid numerical instability. The EXST1 exciter model is a primary source of fast dynamics in power system transients. In case of the EXST1, the required small integration time step for entire system simulation increases the computational demands in terms of running time and storage. This paper presents a practical exciter model reduction approach which allows the increase of the required step size and thus the method can decrease the computational demands. The fast dynamics in the original EXST1 are eliminated in the reduced exciter model. The use of a larger time step improves the computational efficiency. This paper describes the way to eliminate the fast dynamics from the original exciter model based on linear system theory. In order to validate the performance of the proposed method, case studies with the GSO-37 bus system are provided. Comparisons between the original and reduced models are made in simulation accuracy and critical clearing time.

Fine-scalable SPIHT Hardware Design for Frame Memory Compression in Video Codec

  • Kim, Sunwoong;Jang, Ji Hun;Lee, Hyuk-Jae;Rhee, Chae Eun
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제17권3호
    • /
    • pp.446-457
    • /
    • 2017
  • In order to reduce the size of frame memory or bus bandwidth, frame memory compression (FMC) recompresses reconstructed or reference frames of video codecs. This paper proposes a novel FMC design based on discrete wavelet transform (DWT) - set partitioning in hierarchical trees (SPIHT), which supports fine-scalable throughput and is area-efficient. In the proposed design, multi-cores with small block sizes are used in parallel instead of a single core with a large block size. In addition, an appropriate pipelining schedule is proposed. Compared to the previous design, the proposed design achieves the processing speed which is closer to the target system speed, and therefore it is more efficient in hardware utilization. In addition, a scheme in which two passes of SPIHT are merged into one pass called merged refinement pass (MRP) is proposed. As the number of shifters decreases and the bit-width of remained shifters is reduced, the size of SPIHT hardware significantly decreases. The proposed FMC encoder and decoder designs achieve the throughputs of 4,448 and 4,000 Mpixels/s, respectively, and their gate counts are 76.5K and 107.8K. When the proposed design is applied to high efficiency video codec (HEVC), it achieves 1.96% lower average BDBR and 0.05 dB higher average BDPSNR than the previous FMC design.

A Multithreaded Implementation of HEVC Intra Prediction Algorithm for a Photovoltaic Monitoring System

  • Choi, Yung-Ho;Ahn, Hyung-Keun
    • Transactions on Electrical and Electronic Materials
    • /
    • 제13권5호
    • /
    • pp.256-261
    • /
    • 2012
  • Recently, many photovoltaic systems (PV systems) including solar parks and PV farms have been built to prepare for the post fossil fuel era. To investigate the degradation process of the PV systems and thus, efficiently operate PV systems, there is a need to visually monitor PV systems in the range of infrared ray through the Internet. For efficient visual monitoring, this paper explores a multithreaded implementation of a recently developed HEVC standard whose compression efficiency is almost two times higher than H.264. For an efficient parallel implementation under a meshbased 64 multicore system, this work takes into account various design choices which can solve potential problems of a two-dimensional interconnects-based 64 multicore system. These problems may have not occurred in a small-scale multicore system based on a simple bus network. Through extensive evaluation, this paper shows that, for an efficient multithreaded implementation of HEVC intra prediction in a mesh-based multicore system, much effort needs to be made to optimize communications among processing cores. Thus, this work provides three design choices regarding communications, i.e., main thread core location, cache home policy, and maximum coding unit size. These design choices are shown to improve the overall parallel performance of the HEVC intra prediction algorithm by up to 42%, achieving a 7 times higher speed-up.

A Novel Variable-Speed Renewable-Energy Generation System of Induction Generator and PWM Converter for Small-Scale Hybrid Power Applications

  • Ahmed, Tarek;Nishida, Katsumi;Lee, Hyun-Woo;Nakaoka, Mutsuo
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
    • /
    • pp.1339-1342
    • /
    • 2005
  • This paper presents a simple AC-DC power conditioner for a squirell-cage induction generator(IG) operating under variable shaft speeds. The necessary reactive power for the IG system is supplied by means of a capacitor bank and a voltage-source PWM converter. Using a capacitor bank to transfer the reactive power to the IG under the rated speed and no-load conditions starts the IG operation and reduces the PWM power converter size. A simple control compensating for changes in the electrical loads as well as the variation in speed was developed to regulate the voltages of the IG system by controlling the rotor flux through its reactive and active currents control implementation. This proposed power conditioning scheme can be used efficiently as a wind power generation system where the output voltage of the IG is maintained constant voltage despite the variable frequency and the DC bus voltage of the PWM converter can be used for either DC applications such as battery charging or AC power applications with 60/50 Hz by connecting a stand alone inverter. The experimental and simulated operating performance results of a 5 kW IG scheme at various speeds and leads are presented.

  • PDF

Characteristics in Densities and Shapes of Various Particles Produced by Friction between Tire Tread and Road Surface

  • Jung, Uiyeong;Choi, Sung-Seen
    • Elastomers and Composites
    • /
    • 제57권3호
    • /
    • pp.92-99
    • /
    • 2022
  • A large amount of particles on the roads is produced by friction between the vehicles and the road surface and by inflow from outside. The type of these particles affects the abrasion behavior of tire tread. In this study, road dust collected at a bus stop was separated by size, and the particles with sizes of 106-212 mm were analyzed. The particles were separated by density using NaI and NaBr aqueous solutions with densities in the range of 1.10-1.80 g/cm3 with the 0.10 g/cm3 interval. In the road dust sample, the following particle types were found: tire-road wear particles (TRWPs), asphalt pavement wear particles (APWPs), plant-related particles (PRPs), road paint wear particles (RPWPs), and plastic particles (PPs). The densities of TRWPs, APWPs, PRPs, and RPWPs were 1.20-1.80, >1.60, >1.10, and >1.40 g/cm3, respectively, while PPs were found in all density ranges. Additionally, many small mineral particles were observed on the particles. Order of the relative content of the particles was PRP > TRWP > APWP ~ RPWP > PP. APWPs that were stuck to TRWP could be removed by chloroform treatment. The shapes of the particles were characterized using their magnified images.

DMA 인터페이스를 갖는 블루투스 기저대역 모듈의 설계 및 구현 (Design and Implementation of a Bluetooth Baseband Module with DMA Interface)

  • 천익재;오종환;임지숙;김보관;박인철
    • 대한전자공학회논문지SD
    • /
    • 제39권3호
    • /
    • pp.98-109
    • /
    • 2002
  • 블루투스 무선 기술은 음성 및 데이터 전송을 위한 단거리 일대다중 무선 주파수 통신을 위해 제안된 범용적으로 사용 가능한 무선통신 기술이다. 블루투스는 2.4㎓ ISM 밴드에서 동작하며 약 l0m 범위의 다양한 이동 장치와 휴대용 장치를 위한 저가격의 기저대역 무선 접속을 제공한다 본 논문은 DMA 방식의 블루투스 기저대역 모듈을 개발하고 그 구조와 테스트 결과를 보인다. 개발된 모듈은 링크 컨트롤러, UART 그리고 오디오 코덱의 세가지 블록으로 구성되며 메인 프로세서 사이의 정보 전달 및 DMA지원을 위한 버스 인터페이스와 RF모듈과의 데이터 송수신을 위한 RF 인터페이스를 지원한다. DMA의 사용은 FIFO를 이용한 데이터의 송수신 방법을 사용하는 기저대역 모듈에 비하여 모듈의 구현 크기 및 데이터의 처리 속도에 있어서도 많은 차이점을 갖는다. 각 블록을 DMA를 지원하도록 설계함으로써 작은 크기의 모듈을 설계할 수 있다. 이러한 작은 크기의 모듈은 생산비용의 절감과 함께 다양한 응용분야에 사용될 수 있는 범용성을 제공한다. 또한 본 모듈은 UART를 이용한 펌웨어 업그레이드 방식을 지원하고 소프트 IP로 설계되었으며 FPGA와 ASIC으로 구현하여 개인용 컴퓨터 사이의 파일 전송과 비트-스트림 전송을 통해 테스트 되었다.

역사 내 진동저감형 디스크 받침 특성에 관한 연구 (A study on the characteristics of Vibration Reduction Type Disk bearing in Station of Rapid Transit Railway)

  • 박태현;박헌상;김호배;최진호
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
    • /
    • pp.297-302
    • /
    • 2011
  • Railway construction in the random vibration natural phenomena, as well as a relatively regular train loads for dynamic loads, such as a usability and safety should be ensured. Vibration due to train loads and seismic vibrations caused by wind compared to the typically very small in size, rather than the safety of the structure affects the usability. Recently in the downtown area, ground and underground facilities, such as a permanent facility that may cause excessive vibration increases, associated with the construction of these transportation facilities on ground vibrations of structures has been increasing concern and complaint. More recently, high-speed train vibration and noise due to furnace is increasing. In order to solve this problem, such as soundproof considering several feet, but by applying the vibration and noise reduction measures insufficient for the study is Free. In this study, track structure, track, and the inside of the building to support the system, the different forms of neurological history and share about the history cheonanahsan high-speed rail, if passed by the bus stop on the train loads of noise, and the history of interior noise and vibration measurement / analysis of measurement results to assess the relative comparison with the relevant provisions were reviewed. Based on this history, future plans for the design of the bridge to reflect the results of a study is intended to provide information. Waiting for the analysis of vibration and noise reduction, cheonanahsan history passed quietly in the train, on average, appeared to 67.53dB and 65.41dB nervous week on average, were measured with the history. Nervous week waiting room of history and the history cheonanahsan radically different shapes and sizes, so a direct comparison is impossible, but the vibration caused by the disc on the base of the polyurethane elastomer disk is not supported by GERB SYSTEM Waiting more effective in reducing the noise level considered in The main materials for railway and for the localization will help to ensure affordability is considered.

  • PDF

단속적(斷續的) 불규칙 주소간격을 갖는 멀티미디어 데이타를 위한 하드웨어 캐시 선인출 방법 (A Hardware Cache Prefetching Scheme for Multimedia Data with Intermittently Irregular Strides)

  • 전영숙;문현주;전중남;김석일
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제31권11호
    • /
    • pp.658-672
    • /
    • 2004
  • 멀티미디어 응용 프로그램은 방대한 양의 데이타를 실시간으로 고속 처리해야 한다. 적재/저장과 같은 메모리 참조 명령어는 프로세서의 고속 수행을 방해하는 주요인이다. 메모리 참조 속도를 향상시키기 위하여, 다음에 참조될 것으로 예상되는 데이타를 미리 캐시로 인출함으로써, 캐시 미스율과 전체 수행시간을 감소시키는 캐시 선인출 방법이 활용되고 있다. 본 연구에서는 기존의 참조예측표(RPT: Reference Prediction Table)를 사용하는 방법을 개선한 데이타 캐시 선인출 방법을 제시한다. 동일한 명령어가 참조하는 데이타의 주소간격을 계산할 때 캐시의 라인크기 단위의 주소간격을 사용하고, 규칙적인 주소간격에 불규칙한 간격이 하나 포함하더라도 선인출 효과를 유지할 수 있도록 선인출 알고리즘을 개선하였다. 일반적으로 많이 사용되는 멀티미디어 프로그램에 대하여 실험한 결과, 기존의 RPT 방식에 비하여 버스 사용량은 약 0.03% 증가한 반면에 캐시 미스율은 평균적으로 29% 정도 향상되었다.

CNG 버스용 NGOC+LNT+SCR 촉매시스템의 특성 (Characteristics of Catalysts System of NGOC-LNT-SCR for CNG Buses)

  • 서충길
    • 한국산학기술학회논문지
    • /
    • 제20권4호
    • /
    • pp.626-631
    • /
    • 2019
  • 친환경자동차의 보급 확대를 위한 정책수립과 기술개발이 지속적으로 이루어지고 있는 실정이나 아직까지도 내연기관이 차지하는 비중은 약 95% 차지하고 있다. 화석연료를 기반으로 하는 내연기관의 엄격한 배기가스규제를 충족시키기 위해 자동차와 선박용 후처리장치의 비중이 점차로 증가하고 있다. 이 연구는 CNG 버스의 post Euro-VI 배기대응을 위한 기초연구로써, Pd 대체 전이금속 영향, 촉매 체적 영향 그리고 공간속도에 따른 기초 특성을 파악하는 것이다. 촉매는 제조되었고 모델가스반응장치로 실험하였다. 3Pd가 포함된 NGOC 촉매는 $300^{\circ}C$에서 22%, $350^{\circ}C$에서 48% 그리고 $500^{\circ}C$에서 약 75%의 $CH_4$ 저감 능력을 나타내며 촉매 활성이 가장 높았다. 전이금속 3wt%가 포함된 3Co NGOC는 산화능력이 우수한 물질로써, 2nm급의 작은 사이즈로 촉매 분산도가 향상되어 de-NO/CO 전환율이 높았다. NGOC+LNT+SCR 촉매시스템의 체적은 $De-CH_4/NOx$ 성능과 촉매비용을 고려할 때 Total score가 165를 나타낸 1.5+0.5+0.5 조합이 최적이었다. SV $14,000h^{-1}$일 경우 $CH_4$ 저감 성능은 약 20% 수준으로 가장 높았고, SV $56,000h^{-1}$의 경우가 약 5% 수준으로 가장 낮았다. 공간속도가 작으면 유속이 감소하여 촉매 체적에 잔류하는 시간이 길어지므로 유해가스가 저감되었기 때문이다.