• Title/Summary/Keyword: Small system

Search Result 14,249, Processing Time 0.049 seconds

The Cesium Removal Using a Polysulfone Carrier Containing Nitric Acid-treated Bamboo Charcoal (질산으로 표면처리한 대나무 활성탄을 첨가한 폴리술폰 담체의 세슘제거 효율 규명)

  • Rahayu, Ni Wayan Sukma Taraning;Kim, Seonhee;Tak, Hyunji;Kim, Kyeongtae;Lee, Minhee
    • Economic and Environmental Geology
    • /
    • v.53 no.5
    • /
    • pp.529-542
    • /
    • 2020
  • The cesium (Cs) sorption characteristics of a bead-type polysulfone carrier contained HNO3-treated bamboo charcoal (3 - 5 mm in diameter) in water system were investigated and its Cs removal efficiency as an adsorbent from water was also identified by various laboratory experiments. From the results of batch sorption experiments, the bead-type polysulfone carrier with only 5% HNO3-treated bamboo charcoal (P-5NBC) represented the high Cs removal efficiency of 57.8% for 1 hour sorption time. The Cs removal efficiency of P-5NBC in water after 24 hours reaction maintained > 69% at a wide range of pH and temperature conditions, attesting to its applicability under various water systems. Batch sorption experiments were repeated for P-5NBC coated with two cultivated microorganisms (Pseudomonas fluorescens and Bacillus drentensis), which were typical indigenous species inhabited in soil and groundwater. The Cs removal efficiency for two microorganisms coated polysulfone carrier (BP-5NBC) additionally increased by 19% and 18%, respectively, compared to that of only P-5NBC without microorganisms coated. The average Cs desorption rate of P-5NBC for 24 h was lower than 16%, showing the Cs was stably attached on HNO3-treated bamboo charcoal in so much as its long-term use. The maximum Cs sorption capacity (qm) of P-5NBC calculated from the Langmuir isotherm model study was 60.9 mg/g, which was much higher than those of other adsorbents from previous studies for 1 h sorption time. The results of continuous column experiments showed that the P-5NBC coated with microorganisms packed in the column maintained > 80% of the Cs removal efficiency during 100 pore volumes flushing. It suggested that only 14.7 g of P-5NBC (only 0.75 g of HNO3 treated bamboo charcoal included) can successfully clean-up 7.2 L of Cs contaminated water (the initial Cs concentration: 1 mg/L; the effluent concentration: < 0.2 mg/L). The present results suggested that the Cs contaminated water can be successfully cleaned up by using a small amount of the polysulfone carrier with HNO3-treated bamboo charcoal.

Classification by Zooplankton Inhabit Character and Freshwater Microbial Food Web: Importance of Epiphytic Zooplankton as Energy Source for High-Level Predator (동물플랑크톤의 서식 특성에 따른 분류와 먹이망: 상위포식자의 에너지원으로서 부착성 동물플랑크톤의 중요성)

  • Choi, Jong-Yun;La, Geung-Hwan;Jeong, Kwang-Seuk;Kim, Seong-Ki;Chang, Kwang-Hyeon;Joo, Gea-Jae
    • Korean Journal of Ecology and Environment
    • /
    • v.45 no.4
    • /
    • pp.444-452
    • /
    • 2012
  • We conducted a comprehensive monitoring for freshwater food web in a wetland system (Jangcheok Lake), from May to October, 2011. Monthly sampling for zooplankton, fish as well as organic matters, was implemented. In order to understand the food web structure and energy flow, we applied stable isotope analysis to the collected samples, based on ${\delta}^{13}C$ and ${\delta}^{15}N$ values of epiphytic particulate organic matter(EPOM) and particulate organic matter (POM), epiphytic and planktonic zooplankton, fish (Lepomis macrochirus). In the study site, epiphytic and planktonic zooplankton was 24 and 30 species, respectively, and coincidence species between epiphytic and planktonic zooplankton were 20 species. Epiphytic zooplankton were more abundant during the spring and early summer (May to July); however, planktonic zooplankton were more abundant during the autumn (September to October) season. Stable isotope analysis revealed that fish and epiphytic zooplankton had seasonal variations on their food sources. EPOM largely contributed epiphytic zooplankton in spring (May), but increasing contribution of POM in autumn (September) was detected. However, planktonic zooplankton depended on only POM in both seasons. Fish utilized both epiphytic and planktonic zooplankton, but small sized (1~3 cm), fish preferred epiphytic zooplankton, where as larger sized (4~7 cm) fish tended to consume planktonic zooplankton, and epiphytic zooplankton had important role in energy transfer. This pattern was clear when results of spring and autumn stable isotope analysis were compared. From the results of this study, we confirmed that wetlands ecosystem supported various epiphytic and planktonic zooplankton species, they depend on other food items, respectively. L. macrochirus also showed a difference of food source according to the body size, they depend on seasonal density change of zooplankton. In particular, epiphytic zooplankton was very important for growth and development of young fish in the spring.

Comparative study between proportional method and directional method in locating acupoints at forearm (전완부(前腕部) 경혈(經穴) 취혈(取穴)에서 골도분촌법(骨度分寸法)과 일부법(一夫法)의 비교(比較) 연구(硏究))

  • Park, Hi-Joon;Chae, Youn-Byoung;Cha, Wung-Seok;Park, Jong-Bae;Lee, Hye-Jung;Lee, Hyang-Sook;Yin, Chang-Sik;Koh, Hyung-Kyun;Kim, Su-Young;Choe, Il-Hwan;Kim, Kang-Sik;Moon, Jung-Bae;Bae, Ki-Tae;Rheu, Kyoung-Hwan;Yook, Keun-Yung;Jeong, Byeong-Ju;Sohn, In-Chul;Lim, Sabina
    • Korean Journal of Acupuncture
    • /
    • v.21 no.4
    • /
    • pp.31-41
    • /
    • 2004
  • Background : The cun measurement system, an essential and convenient method in locating acupoints, has been widely used in the practice of acupuncture. However, traditional cun measurement has been criticized for its lack of reliability. Objectives : The purposes of this study are to determine if one cun measured by the directional methods have a consistency with that of proportional methods and to investigate which factors are related with these differences, especially in forearm. Methods : The distance between the elbow crease and the wrist crease of forearm was compared to a reference value of one cun obtained by the directional method. In this method, one cun is one third of the distance between index finger and small finger of a subject, measured at proximal interphalangeal joint. In addition, to investigate the factors influencing the differences between these two methods, we measured the height and body weight and calculated body mass index (BMI). Finally we analyzed the factors correlated with these lengths by linear regression test. Results : The results showed that one cun obtained by the directional methods were significantly different from one cun by the proportional methods in forearm. It was demonstrated that the length acquired with the directional method was more correlated with body weight and body mass index, while the length obtained by the proportional method was more correlated with the height. Conclusion : These findings suggest that the directional method is less likely dependable in locating acupoints than the proportional method because the influencing factors are different.

  • PDF

The Profile of Milling Plants in Korea (우리나라 양곡가공공장의 현황분석)

  • 정창주;금동혁;강화석
    • Journal of Biosystems Engineering
    • /
    • v.3 no.1
    • /
    • pp.47-63
    • /
    • 1978
  • This study was conducted to obtain a basic information necessary to assess present rice milling technology in Korea The profiles for milling plants was analyzed by survey work.For the private custom-work mills, which process about 80 percent of domestic rice consumption ,their actual milling test for the identical samples as used for filed mills was conducted. Two rice varieties Japonica and Tongil-type were associated with the experiments. The results are summarized as follows: 1. Analyses for private custom-work mills showed their general aspects as; about 91 percent of the mills belonged to an individual owner ship ; more than 93 percent of the mills was established earlier than 1950 ; about 80 percent of the mills was powered with electric motor; mills having less than two employees were about 75 percent; about 45 percent of the mills provided for warehouse in storing customers cereal grains. 2. The polishers installed in 1,255mills within the surveyed area (7 counties) have been supplied by 44 different domestic manufacturers ;in but about 60 percent of which was supplied by 6major manufacturers. The polishers could be classified into two categories in terms of principles of their polishing actions ;jet-pearler and friction types. About 51 percent of the mills was equipped with the former which has been recognized as giving greater milling recovery than the friction types. 3. Reason for owners of private mills to supplement new machines was due mainly to pgrading their mills to meet the requirements that established by the Government. However, about 60 percent of the mill owners intended to replace with new pearler by their own needs to meet with new high yielding varieties. 4. Processing systems of each previate rice mills surveyed could be classified into three categories, depending upon whether the systems posessed such components as precleaner and paddy separator or not. Only 36.7 percent of mills was installed with both precleanr ad paddy seperrator, 5.0 percent of mills did have neither percleaner nor paddy seperator, and rest of them equipped only one of the two. Hence,it is needed for about 63% of rice miils to be supplemented with these basic facilities to meet with the requirements for the standaized system. 5. Actual milling capacity measured at each field rice mills was shown a wide variation, having range from about 190 to 1,210 kg/hr. The percentages of mills classified according to daily milling capacity based on this hourly capacity were 24.3% for the capacity less than 3 M/T a day; 20.0% for 3-4 M/T; 15.6% for 4-5 M/T; 6.7% for 5-6 M/T; 22.3% for 6-7 M/T; and 11.0% for more than 7 M/T a day. 6. Actual amount of rice processed was about 310 M/T a year in average. About 42% of total milled rice was processed during October to Decembear, which formed a peak demand period for rice mills. The amount of rice milled during January to May was relatively small, but it had still a large amount compared to that during June to September. 7. Utilization rate of milling facility, i. e., percentage of the actual amount of milled rice to the capacity of rice mills, was about 18% on the year round average, about 41% in the peak demand season, and about 10% during June to September. Average number of operating days for mills surveyed was about 250 days a year, and about 21 days a month. 8. Moisture contents of paddy at the time of field mill tests were ranged 14.5% to 19.5% for both Japonica and Tong-i] varieties, majority of paddy grains having moisture level much higher than 1530. To aviod potential reduction of milling recovery while milling and deterioration of milled rice while storage due to these high grain mJisture contents, it may be very important for farmers holding rice to dry by an artificial drying method. 9. Milling recovery of JapJnica varieties in rice mills was 75.0% in average and it was widely ranged from 69.0% to 78.0 % according to mills. Potential increase in milJing recovery of Japonica variety with improvement of mill facilities was estimated to about 1.9%. On the other hand, milling recovery of Tong-il varieties in the field mill tests was 69.8% in average and it ranged from 62% to 77 %, which is much wider than that of Japonica varieties. It is noticed that the average milling recovery of Tong-il variety of 69.8% was much less than that of the Japonica-type. It was estimated th3.t up to about 5.0% of milling recovery for Tong-il variety could be improved by improving the present lo'.ver graded milling technology. 10. Head rice recoveries, as a factor of representing the quality of commercial goods, of Japonica and Tong-il varieties were 65.9% and 53.8% in average, and they were widely ranged from 52% to 73% and from 44% to 65% , respectively. It was assessed that head rice recovery of Japonica varieties can be improved up 3.3% and that of Tong-il varieties by 7.0% by improving mill components and systems.

  • PDF

An Awareness of Welfare Facility for the Elderly and It's Related Factors of College Students (노인복지시설(老人福祉施設)에 대한 대학생(大學生)의 의식(意識)과 관련요인(關聯要因))

  • Jowa Yooun-Teak;Nam Chul-Hyun;Park Chun-Man
    • Journal of Society of Preventive Korean Medicine
    • /
    • v.2 no.1
    • /
    • pp.87-111
    • /
    • 1998
  • For the newly approach of policy with the old aged era at hand, the result which examines the 1,200 students attending professional colleges and upward in three small-to-medium sized cities, for two months, from October 1, 1996 to November 30, in order to know the change of consciousness of the growing modern young intellectual age group is as follows. 1. The objects of survey consist of 72.1% of women, 40.4% of 20 to 21 age, 49.1% of atheists, and people from big cities and fishing and agrarian village occupy equally 40.2%. Concerning the long-termed residents, 49% of them dwell in big cities. In case of the parents' age is more than 55, 31.5% in fathers, and 10.9% in mothers. 2. The types of housing in which they desire to reside in their getting older are : 72.8% of them hope to live in individual houses, 16.6% in apartments or villas, and 3.4% in social welfare facilities. Out of respondents, compared with other groups, man rather than woman, those who are 20 to 21 age group and from fishing and agrarian villages and have over 7 family members and live with their parents have a higher preference for independent houses. 3. The districts in which they hope to live when they are old are : 41.6% of them, with the highest percent, hope to live in farming villages, the older they are, the more they hope to live in agricultural district, and women of 21 years and upward hope to live in big cities. On the other hand, the preferable degree for social welfare facilities is higher each in people who are 24 years and upward, buddhists, self-boarding students, and the more poorly they are off, the higher the percent is. 4. The types of preferable welfare facilities for the elderly are : 58.2% of them think silver towns desirable, 28.4% think the charged (or free) elderly welfare facilities. Compared with other groups, the percentage which prefer silver towns is higher in women, people from big cities, residents of main family, long-termed city residents, people with higher income, people having grandparents alive, and people who had experience of taking lectures on hygienics or social welfare. 5. 50.3% of the respondents insist that provision of living expenses against old age should be insured by social security system, and 42.8% by the elderly themselves. The percentage of the former shows higher in people of 21 years and upward, women, residents of fishing and agrarian villages, christians, people in more needy circumstances and people who have experience of using a medical institution. 6. Compared with other nations, 54.5% of the respondents have an opinion that elderly welfare and welfare work in Korea stays in insufficient level and most of them are women, people from farming village, residents of head family, people having younger parents and people being worse health condition, and they have a more positive attitude about the elderly welfare work. 7. 92.3% of the respondents answered that a national budget for the elderly welfare is scarce, and the percentage is higher in people who are older, residents of big cities, people in lower living condition and people in worse health condition. 8. 35.2% of the respondents answered that the proper cost of their old age must be over 220mi11ion. The more a family's total income is, the higher the percentage is. 9. The factors which have an effect on the preference of silver towns are sex(p<0.01, the type of the present residence(p<0.05), and a family's total income(p<0.05). 10. From the survey result of the above, we comes to the conclusion that, for the sake of welfare of the increasing elderly population, government authorities and parties concerned must exert their utmost for the elderly welfare by increasing a budget of it and establishing a number of facilities of the elderly welfare and silver towns located in fresh and comfortable villages. In addition, they have to set up a course of hygienics in all the colleges and instruct the contexts on hygienic welfare as well.

  • PDF

Biomechanics analysis by success and failure during golf putting swing (골프 퍼팅 스윙시 성공과 실패에 따른 운동역학적 분석)

  • Choi, Sung-Jin;Park, Jong-Jin
    • Korean Journal of Applied Biomechanics
    • /
    • v.12 no.2
    • /
    • pp.279-293
    • /
    • 2002
  • In the study the subjects who 10 university golfers act, and the kinetic factors were analyzed by the ground reaction system. the conclusion are as follows. 1) In the golf putting swing, the ground reaction factors of sagital plane in aspect are showen that the left and right foot sufficient difference, in the level of p <.05. 2) In the golf putting swing, the ground reaction factors of frontal plane in aspect is showen that the left foot has no significant difference in AD BS in the level of p < .05. In success, IP, FS. It can show significant difference. In addition, the right foot is shown the success, There is significant difference. 3) In the golf putting swing, the ground reaction factors of the vertical plane in aspect are shown that the left foot has no significant difference in BS, FS in the level p < .05. In success, AD, IP. It can show significant difference. In addition, the right foot is shown the success, There is significant difference. 4) In the golf putting swing, the ground reaction factors of torque in aspect are shown that the left foot had no significant difference in BS in the level p < .05. In success, AD, IP, FS. It can show significant difference. In addition, the right foot has no significant difference in IP in the level p < .05. AD, BS, FS. There is significant difference. The summarized conclusions are as follows. The first that the power of sagital plane needs the motion which can get the good power change in the stabilized pose. The second is that the small motion can make good putting in stabilized pose. The third is that the body weight move to the direction of the ball. The fourth is that the putting which looks perfect oscillation is good motion.

Biodistribution and Hepatic Metabolism of Galactosylated $^{111}In-Antibody-Chelator$ Conjugates: Comparison with $^{111}In-Antibody-Chelator$ Conjugates ($^{111}In$-표지 갈락토즈 접합 항체의 체내분포 및 간에서의 대사 : $^{111}In$-표지 항체와의 비교연구)

  • Kwak, Dong-Suk;Jeong, Kyu-Sik;Ha, Jeoung-Hee;Ahn, Byeong-Cheol;Lee, Kyu-Bo;Paik, Chang-H.;Lee, Jae-Tae
    • The Korean Journal of Nuclear Medicine
    • /
    • v.37 no.6
    • /
    • pp.402-417
    • /
    • 2003
  • Purpose: To evaluate the use of monoclonal antibody (MoAb) as a carrier of the receptor-binding ligand the receptor mediated uptake into liver and subsequent metabolism of $^{111}In-labeled$ galactosylated MoAb-chelator conjugates were investigated and compared with those of $^{111}In$ labeled MoAb. Materials and Methods : T101 MoAb, $IgG_2$ against human lymphocytic leukemic cell, conjugated with cyclic DTPA dianhydride (DTPA) or 2-p-isothiocyanatobenzyl-6-methyl-DTPA (1B4M) was galactosylated with 2-imino-2-methoxyethyl-1-thio-${\beta}$-D-galactose and then radiolabeled with $^{111}In$. Biodistribution and metabolism study was peformed with two $^{111}In-conjugates$ in mice and rats. Results: $^{111}In-labeled$ T101 and its galactosylated conjugates were taken to the liver by the time, mostly within 10 min. However DTPA conjugate was retained longer in the liver than the 1B4M conjugate (55% vs 20% of injected dose at 44 hr). During this time, the radiornetabolite of DTPA conjugate was excreted similarly into urine (24%) and feces (17%). The radiometabolite of 1B4M was excreted primarily into feces (68%) rather than urine (8%). Size exclusion HPLC analysis of the bile and supernatant of liver homogenate showed two peaks the first (35%) with the retention time (Rt) identical to IgG and the second (65%) with Rt similar to free $^{111}In$ at 3 hr post-injection for the 1B4M conjugate, indicating that the metabolite is rapidly excreted through the biliary system. in contrast to DTPA conjugate, the small $^{111}In-DTPA-like$ metabolite was the major radioindium component (90%) in the liver homogenate as early as 3 hour post-injection, but the cumulative radioindium activity in feces was only 17% at 44 hour, indicating that the metabolite from DTPA conjugate does not clear readily through the biliary tract. Conclusion: The galactosylation of the MoAb conjugates resulted in higher hepatocyte uptake and enhanced metabolism, compared to those without galactosylation. Metabolism of the MoAb-conjugates is different between compounds radiolabled with different chelators due to different characteristics of radiometabolites generated in the liver.

Marginal and internal fitness of three-unit zirconia cores fabricated using several CAD/CAM systems (다양한 CAD/CAM 시스템으로 제작된 3 본 고정성 가공의치 지르코니아 코어의 변연 및 내면 적합도 평가)

  • Huh, Jung-Bo;Kim, U-Sic;Kim, Ha-Young;Kim, Jong-Eun;Lee, Jeong-Yeol;Kim, Young-Su;Jeon, Young-Chan;Shin, Sang-Wan
    • The Journal of Korean Academy of Prosthodontics
    • /
    • v.49 no.3
    • /
    • pp.236-244
    • /
    • 2011
  • Purpose: This study was aimed to compare the margin and internal fitness of 3-unit zirconia bridge cores fabricated by several CAD/CAM systems using replica technique. Materials and methods: Three unit-bridge models in which upper canine and upper second premolar were used as abutments and upper first premolar was missed, were fabricated. Fourty models were classified into 4 groups (Cerasys$^{(R)}$ (Group C), Dentaim$^{(R)}$ (Group D), KaVo Everest$^{(R)}$ (Group K), $Lava^{TM}$ (Group L)), and zirconia cores were fabricated by each company. Sixteen points were measured on each abutment by replica technique. Statistical analysis was accomplished with two way ANOVA and Dunnett T3 (${\alpha}$=.05). Results: In most systems, there was a larger gap on inter margin than outer margin. In the Group K, overall fitness was excellent, but the incisal gap was very large. In the Group C, marginal gap was significantly larger than Group K, but overall internal gap was uniform (P<.05). The axial gap was under $100\;{\mu}m$ in all system. The difference between internal and external gap was small on Group L and C. However, internal gap was significantly larger than external gap in Group D (P<.05). The fitness of canine was better than second premolar among abutments (P<.05). Conclusion: The marginal and internal gap was within the clinically allowed range in all of the three systems. There was a larger gap on second premolar than canine on internal and marginal surface. In most systems, there was a larger gap on occlusal surface than axial surface.

Reconstruction after Wide Excision of Malignant Soft Tissue Tumor in Ankle and Foot (족관절 및 족부에 발생한 연부 조직 악성 종양의 광범위 절제술 후 재건술)

  • Kwon, Young-Ho;Cho, Yool;Kim, Jae-Do;Chung, So-Hak
    • The Journal of the Korean bone and joint tumor society
    • /
    • v.14 no.1
    • /
    • pp.33-43
    • /
    • 2008
  • Purpose: To evaluate the clinical usability of reconstructive methods, and how to select flap after wide excision of malignant soft tissue tumor in ankle and foot. Materials and Methods: The 15 cases shown in the 14 patients (In case of a male patient, reconstruction was performed two times due to local recurrence.) with malignant soft tissue tumor in ankle and foot, who underwent reconstruction after wide excision from March 2000 until March 2007. Oncologic, surgical and functional results were evaluated. Results: The method of reconstruction used were anterolateral thigh perforator flap (5cases), Reversed superficial sural artery flap (4 cases), dorsalis pedis flap (3 cases), local flap (3cases). The defect, mean size was $5.5{\times}5.7\;cm$, was reconstructed with rotation flap or free flap, mean size was $5.9{\times}6.0\;cm$, skin graft for remnant. The mean operation time was 310 minutes (120~540 minutes); it took 256 minutes to reconstruct by rotation flap, and 420 minutes by free flap. As oncologic results, 7 patients were no evidence of disease, 6 patients were alive with disease and 1 patient was expired by pulmonary metastasis at the time of the last follow-up. 4 patients had local recurrence and 4 pateints had distant metastases. As functional results, 14 patients were evaluated with average score of 68.8% using the system of the Musculoskeletal Tumor Society. Conclusion: The dorsalis pedis and reverse superficial sural artery rotation flap which is easy procedure, has less complication and takes short operation time, can be primarily considered to reconstruct a small defect. And the anterolateral thigh perforator flap is suitable for coverage of a large defects after wide excision of malignant soft tissue tumor in ankle and foot.

  • PDF

Yoo Young-kuk's Early Constructivism: Utopianism in (1937) (유영국(劉永國)의 초기 구성주의: <랩소디>(1937)에 나타난 유토피아니즘)

  • 유영아
    • The Journal of Art Theory & Practice
    • /
    • no.9
    • /
    • pp.93-121
    • /
    • 2010
  • This study is about Yoo Young-kuk's early works which show constructivism, especially focus on his debut painting, for the 7th Dokuritsu Bijutsu Kyokai(獨立美術協會, the Independent Fine Arts Association) in Tokyo in 1937. The work was painted 2 years after he had started his study in Japan in 1935. It was the first painting that applied Constructivism. played an important role for Constructivism to be a leading art in his abstraction. After this picture, Yoo was soon devoted to the principles of Constructivism-- Faktura(material), Tektonika (tectonics), Tekhnika(technique), space, construction-- in his painterly reliefs. This article examined why Yoo concentrated on Constructivism for , what the characteristics were, and what influences were on other works from 1935 to 1949. In addition, I investigated in which period was painted and how Constructivism was spread in 1930s and early 1940s in chapter 2. I scrutinized Rhapsody in chapter 3. When Yoo created Japan was under the Fifteen Years War(1931-1945), and a major discourse was the Japanese Spirit at that time. It was connected with construction of an ideal nation which the Japanese ultra-national fascism pursued. This ideological pursuit was intended to unite the Japanese people for total war system and to restore a national dignity which had been fallen down due to Manchurian Incident(1931). Thus, on the hand, Kokusai Bunka Shinkokai(國際文化振興, The Society for International Cultural Relations) and the Nippon Kosaku Bunka Renmei(日本工作文化連盟, Japanese Werkbund) were supported financially by the Japanese government. On the other hand, the government enacted regulations to opposing parties which would distract Japanese people's unification. As for the Japanese art world, the merge of art groups was carried out through remodeling of Teikoku Bijutsuin(帝國美術院, The Imperial Fine Arts Academy) in 1935. This brought out continuous dispute and disorder. Young artists who felt difficulty of entering an entry of Imperial Fine Arts Exhibition repeatedly grouped and disbanded for small art groups to build their standing, which they pursued Surrealism and Abstract art. Among them Constructivism was considered as the latest trend and was popular in craft, design, architecture as well as fine arts. In the year before he painted , Avant-garde theatres including Constructivism theatre were introduced in a feature article of September, 1936 in Atelier, which was dealing with mainly avant-garde arts. Books related with Constructivism were translated into Japanese, and Gestaltung Education had become active since the publication of A Compendium of Gestaltung Education("構成敎育大系"(1934)), Salvador Dali(1904-1989) was also introduced, so Surrealism was drawn more attention by young artists. reflected popular trends. Yoo analyzed the Japanese avant-gardists' archaic taste in the Independent Art Association that he submitted his painting to. And then he entitled 'Rhapsody' which derives from Ancient Greek's epic poetry and deliberately set up images in a scene. In chapter 3, I examined a theme which was planned carefully by sorting favorite images from the Japanese Surrealism. was a result that Yoo Young-kuk observed objectively the phenomenon that young artists dreamt of Utopia or longed for Nostalgia passively and lethargically under wars. And then he otherized himself from that circumstance. First of all, for he used the typical icons of Japanese Surrealism such as the horizon, flowing clouds, and vast plain that were considered stereotypes of Arcadia. He, however distinguished himself form those Japanese Surrealists. He made his own vision about Utopia by referring Lyubov Popova(1889-1924)'s stage design. His objective point of view was expressed by positive and dynamic images of structure and human's actions. Constructivism which was attempted in had an effect on other early constructive works, and the principles of Constructivism were sought hard in reliefs, paintings, and photos.

  • PDF